[PATCH v2 16/27] drm/edid: Parse QMS TFR min/max flags from HDMI SCDS

[Nicolas Frattaroli <nicolas.frattaroli@collabora.com>]

HDMI has two flags in the SCDS EDID extension that signal which minimum
and maximum refresh rate the sink wishes to use when doing QMS ("Quick
Media Switching").

How to parse these flags, and what they do, has been learned from the
publicly available libdisplay-info source code.

Add the definitions of where in the byte they are, the code for checking
for them, as well as two new booleans in drm_hdmi_vrr_cap to store the
result.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/drm_edid.c  |  6 ++++++
 include/drm/drm_connector.h | 12 ++++++++++++
 include/drm/drm_edid.h      |  2 ++
 3 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index d439928caacc..39b5c01309e2 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -6237,6 +6237,12 @@ static void drm_parse_hdmi_gaming_info(struct drm_hdmi_info *hdmi, const u8 *db)
 
 	vrr->vrr_max = (db[9] & DRM_EDID_VRR_MAX_UPPER_MASK) << 2 | db[10];
 	vrr->supported &= (vrr->vrr_max == 0 || vrr->vrr_max >= 100);
+
+	if (cea_db_payload_len(db) < 11)
+		return;
+
+	vrr->qms_tfr_min = db[11] & DRM_EDID_QMS_TFR_MIN;
+	vrr->qms_tfr_max = db[11] & DRM_EDID_QMS_TFR_MAX;
 }
 
 static void drm_parse_dsc_info(struct drm_hdmi_dsc_cap *hdmi_dsc,
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 830a33fb5301..4801bb2769e1 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -294,6 +294,18 @@ struct drm_hdmi_vrr_cap {
 
 	/** @qms_capable: The sink supports Quick Media Switching */
 	bool qms_capable;
+
+	/**
+	 * @qms_tfr_min: If set, the sink uses 24/1.001Hz as its minimum rate
+	 * for QMS. If unset, @drm_display_info.monitor_range.min_vfreq is used.
+	 */
+	bool qms_tfr_min;
+
+	/**
+	 * @qms_tfr_max: If set, @drm_display_info.monitor_range.max_vfreq is
+	 * used by the sink as its maximum rate for QMS. If unset, 60Hz is used.
+	 */
+	bool qms_tfr_max;
 };
 
 /**
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index f1e2052cb08b..d339acd9ee52 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -269,6 +269,8 @@ struct detailed_timing {
 #define DRM_EDID_VRR_MAX_UPPER_MASK		0xc0
 #define DRM_EDID_VRR_MAX_LOWER_MASK		0xff
 #define DRM_EDID_VRR_MIN_MASK			0x3f
+#define DRM_EDID_QMS_TFR_MIN			(1 << 4)
+#define DRM_EDID_QMS_TFR_MAX			(1 << 5)
 
 /* DSC specific */
 #define DRM_EDID_DSC_10BPC			(1 << 0)

-- 
2.56.0