From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com, Nate.D@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
Stefano Radaelli <stefano.radaelli21@gmail.com>
Subject: [PATCH v1 1/1] arm64: dts: freescale: Move Variscite Ethernet LEDs to carrier boards
Date: Thu, 5 Nov 2026 11:17:39 +0100 [thread overview]
Message-ID: <20261105101739.10614-1-stefano.r@variscite.com> (raw)
From: Stefano Radaelli <stefano.r@variscite.com>
The Ethernet LEDs are physically on the carrier boards, but the
VAR-SOM-MX8MP, DART-MX91, VAR-SOM-MX93 and DART-MX95 module descriptions
include their LED nodes. Other carriers therefore inherit LED definitions
that may not match their wiring.
Move the LED nodes to the Symphony and Sonata board descriptions through
ethphy0 references, along with the LED binding includes where needed.
Keep the existing LED properties unchanged.
Fixes: c277a3d535bb ("arm64: dts: freescale: imx8mp-var-som: Add EQoS support with MaxLinear PHY")
Fixes: d3ad2ce2116f ("arm64: dts: freescale: Add support for Variscite DART-MX91")
Fixes: 947771d00bdc ("arm64: dts: freescale: imx93-var-som: update eqos support for MaxLinear PHY")
Fixes: bec2988b470e ("arm64: dts: freescale: Add support for Variscite DART-MX95")
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
.../dts/freescale/imx8mp-var-som-symphony.dts | 22 +++++++++++++++++++
.../boot/dts/freescale/imx8mp-var-som.dtsi | 20 -----------------
.../dts/freescale/imx91-var-dart-sonata.dts | 22 +++++++++++++++++++
.../boot/dts/freescale/imx91-var-dart.dtsi | 20 -----------------
.../dts/freescale/imx93-var-som-symphony.dts | 21 ++++++++++++++++++
.../boot/dts/freescale/imx93-var-som.dtsi | 19 ----------------
.../dts/freescale/imx95-var-dart-sonata.dts | 22 +++++++++++++++++++
.../boot/dts/freescale/imx95-var-dart.dtsi | 20 -----------------
8 files changed, 87 insertions(+), 79 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index e928a3d44b1d..49d20db7de5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -3,6 +3,7 @@
* Copyright 2024 Variscite Ltd.
*/
+#include <dt-bindings/leds/common.h>
#include "imx8mp-var-som.dtsi"
/ {
@@ -129,6 +130,27 @@ ethphy1: ethernet-phy@5 {
};
};
+ðphy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 61786eee0e82..cbf58aed180a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -8,7 +8,6 @@
/dts-v1/;
#include <dt-bindings/phy/phy-imx8-pcie.h>
-#include <dt-bindings/leds/common.h>
#include <dt-bindings/usb/pd.h>
#include "imx8mp.dtsi"
@@ -155,25 +154,6 @@ ethphy0: ethernet-phy@4 {
reset-assert-us = <10000>;
reset-deassert-us = <100000>;
vddio-supply = <®_phy_vddio>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
- };
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
index f7e32f9375f5..0f2be56ff7ca 100644
--- a/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
@@ -10,6 +10,7 @@
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "imx91-var-dart.dtsi"
/ {
@@ -173,6 +174,27 @@ led@1 {
};
};
+ðphy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+};
+
&fec {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_fec>;
diff --git a/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
index a9e44efad13f..ec65cd42c195 100644
--- a/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
@@ -10,7 +10,6 @@
/dts-v1/;
-#include <dt-bindings/leds/common.h>
#include <dt-bindings/usb/pd.h>
#include "imx91.dtsi"
@@ -81,25 +80,6 @@ ethphy0: ethernet-phy@0 {
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <15000>;
reset-deassert-us = <100000>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
- };
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index 1f0954620195..477f31a4cf88 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -189,6 +189,27 @@ vddio1: vddio-regulator {
};
};
+ðphy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
index b0ffcb534cb6..d9ecbc3e9a6d 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -75,25 +75,6 @@ ethphy0: ethernet-phy@0 {
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <100000>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
- };
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
index 9344a0d99418..ed3e2e1b995c 100644
--- a/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/leds/common.h>
#include "imx95-var-dart.dtsi"
/ {
@@ -163,6 +164,27 @@ &enetc_port2 {
status = "okay";
};
+ðphy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+};
+
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
index b4c55bd33858..92ff09fe64a7 100644
--- a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
@@ -10,7 +10,6 @@
/dts-v1/;
-#include <dt-bindings/leds/common.h>
#include <dt-bindings/usb/pd.h>
#include "imx95.dtsi"
@@ -193,25 +192,6 @@ ethphy0: ethernet-phy@0 {
reset-gpios = <&gpio5 16 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <100000>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- linux,default-trigger = "netdev";
- };
- };
};
};
--
2.47.3
next reply other threads:[~2026-11-05 10:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 10:17 Stefano Radaelli [this message]
2026-11-05 17:34 ` Frank Li
2026-11-05 17:44 ` Stefano Radaelli
2026-11-05 17:53 ` Frank Li
2026-11-05 17:56 ` Stefano Radaelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261105101739.10614-1-stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Nate.D@variscite.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®