mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ryan Wanner <ryan.wanner@microchip.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH v4 11/16] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device
Date: Thu,  5 Nov 2026 12:06:47 +0100	[thread overview]
Message-ID: <20261105110715.2486432-12-ada@thorsis.com> (raw)
In-Reply-To: <20261105110715.2486432-1-ada@thorsis.com>

For SAM9X60 and SAMA7G5 the Product UID x Register containing the Unique
Product ID is part of the OTPC registers.  Expose this unique id as
trivial nvmem device in a similar fashion like the soc sfr driver on
SAMA5D2 does.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
---

Notes:
    v4:
    - Add missing include header for iomem access (thanks Claudiu)
    - Reword commit message
    
    v3:
    - no changes
    
    v2:
    - Use dev_err_probe() for error reporting (thanks Claudiu)
    - Move required register definition over here from removed patch

 drivers/nvmem/microchip-otpc.c | 39 +++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
index 4286365686563..e10291f59a3b7 100644
--- a/drivers/nvmem/microchip-otpc.c
+++ b/drivers/nvmem/microchip-otpc.c
@@ -9,6 +9,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/nvmem-provider.h>
@@ -25,10 +26,14 @@
 #define MCHP_OTPC_HR			(0x20)
 #define MCHP_OTPC_HR_SIZE		GENMASK(15, 8)
 #define MCHP_OTPC_DR			(0x24)
+#define MCHP_OTPC_UID0R			(0x60)
 
 #define MCHP_OTPC_NAME			"mchp-otpc"
 #define MCHP_OTPC_SIZE			(11 * 1024)
 
+#define MCHP_OTPC_UID_NAME		"mchp-uid"
+#define MCHP_OTPC_UID_SIZE		16
+
 /**
  * struct mchp_otpc - OTPC private data structure
  * @base: base address
@@ -230,6 +235,16 @@ static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
 	return 0;
 }
 
+static int mchp_otpc_uid_read(void *priv, unsigned int offset,
+			      void *val, size_t bytes)
+{
+	struct mchp_otpc *otpc = priv;
+
+	memcpy_fromio(val, otpc->base + MCHP_OTPC_UID0R + offset, bytes);
+
+	return 0;
+}
+
 static struct nvmem_config mchp_nvmem_config = {
 	.name = MCHP_OTPC_NAME,
 	.type = NVMEM_TYPE_OTP,
@@ -239,6 +254,15 @@ static struct nvmem_config mchp_nvmem_config = {
 	.reg_read = mchp_otpc_read,
 };
 
+static struct nvmem_config mchp_otpc_uid_nvmem_config = {
+	.name = MCHP_OTPC_UID_NAME,
+	.read_only = true,
+	.word_size = 4,
+	.stride = 4,
+	.size = MCHP_OTPC_UID_SIZE,
+	.reg_read = mchp_otpc_uid_read,
+};
+
 static int mchp_otpc_probe(struct platform_device *pdev)
 {
 	struct nvmem_device *nvmem;
@@ -269,8 +293,21 @@ static int mchp_otpc_probe(struct platform_device *pdev)
 	mchp_nvmem_config.size = size;
 	mchp_nvmem_config.priv = otpc;
 	nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
+				     "Error registering OTP as nvmem device\n");
+	}
 
-	return PTR_ERR_OR_ZERO(nvmem);
+	mchp_otpc_uid_nvmem_config.dev = otpc->dev;
+	mchp_otpc_uid_nvmem_config.priv = otpc;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &mchp_otpc_uid_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
+				     "Error registering UIDxR as nvmem device\n");
+	}
+
+	return 0;
 }
 
 static const struct of_device_id __maybe_unused mchp_otpc_ids[] = {
-- 
2.47.3


  parent reply	other threads:[~2026-11-05 13:11 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-05 11:06 [PATCH v4 00/16] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional " Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 01/16] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 02/16] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 03/16] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 04/16] clk: at91: Use new per SoC PMC clock index definitions Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 05/16] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-11-06  2:39   ` kernel test robot
2026-11-05 11:06 ` [PATCH v4 06/16] clk: at91: Add peripheral clock id for OTPC Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 07/16] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 08/16] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 09/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 10/16] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-11-05 11:06 ` Alexander Dahl [this message]
2026-11-05 11:06 ` [PATCH v4 12/16] ARM: dts: microchip: Use new per SoC PMC bindings Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 13/16] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 14/16] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 15/16] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 16/16] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261105110715.2486432-12-ada@thorsis.com \
    --to=ada@thorsis.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=ryan.wanner@microchip.com \
    --cc=srini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®