From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v4 03/16] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT
Date: Thu, 5 Nov 2026 12:06:39 +0100 [thread overview]
Message-ID: <20261105110715.2486432-4-ada@thorsis.com> (raw)
In-Reply-To: <20261105110715.2486432-1-ada@thorsis.com>
The main rc oscillator will be needed for the OTPC to work properly.
The new index introduced here was not used on the four affected SoC
clock drivers before.
Link: https://lore.kernel.org/linux-devicetree/20250207-jailbird-circus-bcc04ee90e05@thorsis.com/T/#u
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
Notes:
v4:
- change index for sama7g5 and sama7d65 after re-adding unused PLLs in patch 2
v3:
- adapt to different base changes, added lines are the same
v2:
- new patch, not present in v1
include/dt-bindings/clock/microchip,sam9x60-pmc.h | 1 +
include/dt-bindings/clock/microchip,sam9x7-pmc.h | 1 +
include/dt-bindings/clock/microchip,sama7d65-pmc.h | 1 +
include/dt-bindings/clock/microchip,sama7g5-pmc.h | 1 +
4 files changed, 4 insertions(+)
diff --git a/include/dt-bindings/clock/microchip,sam9x60-pmc.h b/include/dt-bindings/clock/microchip,sam9x60-pmc.h
index 050e5e774b274..830e247ba2532 100644
--- a/include/dt-bindings/clock/microchip,sam9x60-pmc.h
+++ b/include/dt-bindings/clock/microchip,sam9x60-pmc.h
@@ -10,6 +10,7 @@
#define SAM9X60_PMC_MCK 1
#define SAM9X60_PMC_UPLLCK 2
#define SAM9X60_PMC_MAIN 3
+#define SAM9X60_PMC_MAIN_RC 6
#define SAM9X60_PMC_PLLACK 7
#endif
diff --git a/include/dt-bindings/clock/microchip,sam9x7-pmc.h b/include/dt-bindings/clock/microchip,sam9x7-pmc.h
index 292c5873e101e..58d2a08116795 100644
--- a/include/dt-bindings/clock/microchip,sam9x7-pmc.h
+++ b/include/dt-bindings/clock/microchip,sam9x7-pmc.h
@@ -10,6 +10,7 @@
#define SAM9X7_PMC_MCK 1
#define SAM9X7_PMC_UPLLCK 2
#define SAM9X7_PMC_MAIN 3
+#define SAM9X7_PMC_MAIN_RC 6
#define SAM9X7_PMC_PLLACK 7
#define SAM9X7_PMC_AUDIOPMCPLL 9
#define SAM9X7_PMC_AUDIOIOPLL 10
diff --git a/include/dt-bindings/clock/microchip,sama7d65-pmc.h b/include/dt-bindings/clock/microchip,sama7d65-pmc.h
index 08581418b9115..17105a6bedb54 100644
--- a/include/dt-bindings/clock/microchip,sama7d65-pmc.h
+++ b/include/dt-bindings/clock/microchip,sama7d65-pmc.h
@@ -19,6 +19,7 @@
#define SAMA7D65_PMC_AUDIOIOPLL 10
#define SAMA7D65_PMC_ETHPLL 11
#define SAMA7D65_PMC_MCK1 13
+#define SAMA7D65_PMC_MAIN_RC 14
#define SAMA7D65_PMC_LVDSPLL 15
#define SAMA7D65_PMC_MCK3 16
#define SAMA7D65_PMC_MCK5 17
diff --git a/include/dt-bindings/clock/microchip,sama7g5-pmc.h b/include/dt-bindings/clock/microchip,sama7g5-pmc.h
index 27668634b0a2b..4a1c4af8ecc9a 100644
--- a/include/dt-bindings/clock/microchip,sama7g5-pmc.h
+++ b/include/dt-bindings/clock/microchip,sama7g5-pmc.h
@@ -19,5 +19,6 @@
#define SAMA7G5_PMC_AUDIOIOPLL 10
#define SAMA7G5_PMC_ETHPLL 11
#define SAMA7G5_PMC_MCK1 13
+#define SAMA7G5_PMC_MAIN_RC 14
#endif
--
2.47.3
next prev parent reply other threads:[~2026-11-05 11:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 11:06 [PATCH v4 00/16] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 01/16] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 02/16] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-11-05 11:06 ` Alexander Dahl [this message]
2026-11-05 11:06 ` [PATCH v4 04/16] clk: at91: Use new per SoC PMC clock index definitions Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 05/16] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 06/16] clk: at91: Add peripheral clock id for OTPC Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 07/16] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 08/16] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 09/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 10/16] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 11/16] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 12/16] ARM: dts: microchip: Use new per SoC PMC bindings Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 13/16] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 14/16] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 15/16] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 16/16] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261105110715.2486432-4-ada@thorsis.com \
--to=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bmasney+clk@redhat.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®