mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konradybcio@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	 Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>,
	 Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
	 Qiang Yu <qiang.yu@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	 Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
	 Sivansh Gupta <sivansh.gupta@oss.qualcomm.com>,
	 Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
	 Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>,
	 Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>,
	 Abel Vesa <abel.vesa@oss.qualcomm.com>
Subject: [PATCH v3 0/8] Commonize Glymur regulator settings for fixed rails
Date: Fri, 06 Nov 2026 10:29:01 +0100	[thread overview]
Message-ID: <20261106-topic-sip_cob-v3-0-52cd3826ab49@oss.qualcomm.com> (raw)

Certain rails are predefined and will ALWAYS have to be the same for a
given PMIC configuration (due to electrical and other requirements).
Factor these out to remove a layer of pain when creating DTs and let
one have a better way to reason about the settings across the platform.

Glymur-SiP will be the next target after/if this is accepted

Depends on the (reviewed and awaiting merge) Mahua QCB series:
https://lore.kernel.org/all/20261027114955.1266499-1-sivansh.gupta@oss.qualcomm.com/

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
Changes in v3:
- Rebase on next-20261105
- Pick up t-b
- Add SiP commonization and SiP CRD DT. I realize this extends the
  scope of the series but I believe all the changes are pretty
  straightforward and any subset may be picked up)
- Commonize the overlooked pcie3_phy supplies as well
- Link to v2: https://patch.msgid.link/20261030-topic-sip_cob-v2-0-159e29e97c82@oss.qualcomm.com

Changes in v2:
- Fix regulator ranges, boot test on glymur-crd-cob now
- Streamline Mahua setup (all Mahuas are CoB)
- Fix leftovers (Sashiko)
- Remove L4F0 from all Glymur/Mahua DTs
- Rebase on the Mahua QCB patchset
- Drop reviews from p1/p2 due to an invasive rebase
- Link to v1: https://patch.msgid.link/20261028-topic-sip_cob-v1-0-80ab6704aca3@oss.qualcomm.com

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Abel Vesa <abelvesa@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
To: Qiang Yu <qiang.yu@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Sivansh Gupta <sivansh.gupta@oss.qualcomm.com>
Cc: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Cc: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Cc: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

---
Konrad Dybcio (8):
      arm64: dts: qcom: Unify Glymur/Mahua regulator handles
      arm64: dts: qcom: Consolidate Glymur CoB power grid
      arm64: dts: qcom: glymur: Drop L4F0
      arm64: dts: qcom: glymur-crd: Fix L8B0 voltage
      dt-bindings: arm: qcom: Add Glymur SIP CRD
      arm64: dts: qcom: Consolidate Glymur SiP power grid
      arm64: dts: qcom: glymur-crd: Move DP0/DP1 to common dtsi
      arm64: dts: qcom: Add Glymur SiP CRD

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../dts/qcom/glymur-asus-zenbook-a14-ux3407na.dts  | 242 +-----------
 .../dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts  | 362 +++---------------
 arch/arm64/boot/dts/qcom/glymur-cob.dtsi           | 319 ++++++++++++++++
 arch/arm64/boot/dts/qcom/glymur-crd.dts            |  46 +--
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi           | 411 +++++---------------
 .../boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts    | 225 +----------
 .../boot/dts/qcom/glymur-lenovo-yoga-slim7x.dts    | 328 +++-------------
 arch/arm64/boot/dts/qcom/glymur-qcb.dts            |  22 +-
 arch/arm64/boot/dts/qcom/glymur-qcb.dtsi           | 305 +++------------
 arch/arm64/boot/dts/qcom/glymur-sip-crd.dts        |  14 +
 arch/arm64/boot/dts/qcom/glymur-sip.dtsi           | 304 +++++++++++++++
 arch/arm64/boot/dts/qcom/mahua-crd.dts             |  27 +-
 .../qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts   | 412 ++++-----------------
 arch/arm64/boot/dts/qcom/mahua-qcb.dts             |  34 +-
 arch/arm64/boot/dts/qcom/mahua.dtsi                |  29 +-
 17 files changed, 1029 insertions(+), 2053 deletions(-)
---
base-commit: dde2e8a7cd2a498c5e0624b80cc97d34b517d602
change-id: 20261028-topic-sip_cob-65df3325ed28

Best regards,
--  
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>


             reply	other threads:[~2026-11-06  9:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-06  9:29 Konrad Dybcio [this message]
2026-11-06  9:29 ` [PATCH v3 1/8] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 2/8] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 3/8] arm64: dts: qcom: glymur: Drop L4F0 Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 4/8] arm64: dts: qcom: glymur-crd: Fix L8B0 voltage Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 5/8] dt-bindings: arm: qcom: Add Glymur SIP CRD Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 6/8] arm64: dts: qcom: Consolidate Glymur SiP power grid Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 7/8] arm64: dts: qcom: glymur-crd: Move DP0/DP1 to common dtsi Konrad Dybcio
2026-11-06  9:29 ` [PATCH v3 8/8] arm64: dts: qcom: Add Glymur SiP CRD Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261106-topic-sip_cob-v3-0-52cd3826ab49@oss.qualcomm.com \
    --to=konradybcio@kernel.org \
    --cc=abel.vesa@oss.qualcomm.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=gopikrishna.garmidi@oss.qualcomm.com \
    --cc=jyothi.seerapu@oss.qualcomm.com \
    --cc=kamal.wadhwa@oss.qualcomm.com \
    --cc=konrad.dybcio@oss.qualcomm.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pankaj.patil@oss.qualcomm.com \
    --cc=qiang.yu@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=sibi.sankar@oss.qualcomm.com \
    --cc=sivansh.gupta@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®