From: Konrad Dybcio <konradybcio@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>,
Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
Qiang Yu <qiang.yu@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Sivansh Gupta <sivansh.gupta@oss.qualcomm.com>,
Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Subject: [PATCH v3 6/8] arm64: dts: qcom: Consolidate Glymur SiP power grid
Date: Fri, 06 Nov 2026 10:29:07 +0100 [thread overview]
Message-ID: <20261106-topic-sip_cob-v3-6-52cd3826ab49@oss.qualcomm.com> (raw)
In-Reply-To: <20261106-topic-sip_cob-v3-0-52cd3826ab49@oss.qualcomm.com>
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Much like with CoB, the SiP PMIC configuration is fixed, which makes
the regulators and the supply mappings of the on-SoC peripherals the
same across SiP-based boards. Factor them out of the Zenbook A16 into
glymur-sip.dtsi, so that further SiP boards can reuse them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
.../dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts | 336 +++------------------
arch/arm64/boot/dts/qcom/glymur-sip.dtsi | 304 +++++++++++++++++++
2 files changed, 351 insertions(+), 289 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
index e42e6c43f6a3..51dc49fbd86f 100644
--- a/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-asus-zenbook-a16-ux3607oa.dts
@@ -4,25 +4,13 @@
*/
/dts-v1/;
-#include "glymur.dtsi"
-
-#include "pmcx0102.dtsi"
-#include "pmh0101.dtsi"
-#include "pmh0110-glymur.dtsi"
-#include "pmh0104-glymur.dtsi"
-#include "pmk8850.dtsi"
-#include "smb2370.dtsi"
+#include "glymur-sip.dtsi"
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-/delete-node/ &pmh0104_l_e1;
-/delete-node/ &pmh0104_l1_thermal;
-/delete-node/ &pmh0110_h_e0;
-/delete-node/ &pmh0110_h0_thermal;
-
/ {
compatible = "asus,zenbook-a16-ux3607oa", "qcom,glymur";
model = "ASUS Zenbook A16 (UX3607OA)";
@@ -371,220 +359,63 @@ m2_e_uart_ep: endpoint@0 {
};
};
-&apps_rsc {
- /* PMCX0104 */
- regulators-0 {
- compatible = "qcom,pmh0101-rpmh-regulators";
- qcom,pmic-id = "B_E0";
-
- vreg_l1b0: ldo1 {
- regulator-name = "vreg_l1b0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* Unused */
- vreg_l2b0: ldo2 {
- regulator-name = "vreg_l2b0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_l6b0: ldo6 {
- regulator-name = "vreg_l6b0";
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7b0: ldo7 {
- regulator-name = "vreg_l7b0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8b0: ldo8 {
- regulator-name = "vreg_l8b0";
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* Unused */
- vreg_l9b0: ldo9 {
- regulator-name = "vreg_l9b0";
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- };
-
- vreg_l10b0: ldo10 {
- regulator-name = "vreg_l10b0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l11b0: ldo11 {
- regulator-name = "vreg_l11b0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* Unused */
- vreg_l12b0: ldo12 {
- regulator-name = "vreg_l12b0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vreg_l15b0: ldo15 {
- regulator-name = "vreg_l15b0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- /* Provides reference voltage for many undescribed components */
- regulator-always-on;
- };
-
- /* Unused */
- vreg_l17b0: ldo17 {
- regulator-name = "vreg_l17b0";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <2504000>;
- };
-
- vreg_l18b0: ldo18 {
- regulator-name = "vreg_l18b0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
- /* Provides reference voltage for many undescribed components */
- regulator-always-on;
- };
+&rpmh_vregs_b_e0 {
+ /* Unused */
+ vreg_l2b0: ldo2 {
+ regulator-name = "vreg_l2b0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- regulators-1 {
- compatible = "qcom,pmcx0102-rpmh-regulators";
- qcom,pmic-id = "C_E0";
-
- vreg_l1c0: ldo1 {
- regulator-name = "vreg_l1c0";
- regulator-min-microvolt = <936000>;
- regulator-max-microvolt = <936000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2c0: ldo2 {
- regulator-name = "vreg_l2c0";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4c0: ldo4 {
- regulator-name = "vreg_l4c0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+ vreg_l6b0: ldo6 {
+ regulator-name = "vreg_l6b0";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- /* PMCX0101 */
- regulators-2 {
- compatible = "qcom,pmh0110-rpmh-regulators";
- qcom,pmic-id = "F_E0";
-
- vreg_s7f0: smps7 {
- regulator-name = "vreg_s7f0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s8f0: smps8 {
- regulator-name = "vreg_s8f0";
- regulator-min-microvolt = <952000>;
- regulator-max-microvolt = <952000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2f0: ldo2 {
- regulator-name = "vreg_l2f0";
- regulator-min-microvolt = <936000>;
- regulator-max-microvolt = <936000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3f0: ldo3 {
- regulator-name = "vreg_l3f0";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+ vreg_l8b0: ldo8 {
+ regulator-name = "vreg_l8b0";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- regulators-3 {
- compatible = "qcom,pmcx0102-rpmh-regulators";
- qcom,pmic-id = "C_E1";
-
- vreg_l1c1: ldo1 {
- regulator-name = "vreg_l1c1";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2c1: ldo2 {
- regulator-name = "vreg_l2c1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3c1: ldo3 {
- regulator-name = "vreg_l3c1";
- regulator-min-microvolt = <936000>;
- regulator-max-microvolt = <936000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4c1: ldo4 {
- regulator-name = "vreg_l4c1";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+ /* Unused */
+ vreg_l9b0: ldo9 {
+ regulator-name = "vreg_l9b0";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
};
- /* PMCX0101 */
- regulators-4 {
- compatible = "qcom,pmh0110-rpmh-regulators";
- qcom,pmic-id = "F_E1";
+ /* Unused */
+ vreg_l12b0: ldo12 {
+ regulator-name = "vreg_l12b0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
- vreg_l1f1: ldo1 {
- regulator-name = "vreg_l1f1";
- regulator-min-microvolt = <904000>;
- regulator-max-microvolt = <904000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+ /* Unused */
+ vreg_l17b0: ldo17 {
+ regulator-name = "vreg_l17b0";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ };
+};
- vreg_l2f1: ldo2 {
- regulator-name = "vreg_l2f1";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+&rpmh_vregs_f_e0 {
+ vreg_s7f0: smps7 {
+ regulator-name = "vreg_s7f0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
- vreg_l4f1: ldo4 {
- regulator-name = "vreg_l4f1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
+ vreg_s8f0: smps8 {
+ regulator-name = "vreg_s8f0";
+ regulator-min-microvolt = <952000>;
+ regulator-max-microvolt = <952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -732,8 +563,6 @@ misc_3p3_reg_en: misc-3p3-reg-en-state {
};
&lpass_vamacro {
- vdd-micb-supply = <&vreg_l1b0>;
-
pinctrl-0 = <&dmic01_default>;
pinctrl-names = "default";
@@ -802,9 +631,6 @@ &mdss_dp3_out {
};
&mdss_dp3_phy {
- vdda-phy-supply = <&vreg_l2f1>;
- vdda-pll-supply = <&vreg_l4f1>;
-
status = "okay";
};
@@ -816,9 +642,6 @@ &pcie4 {
};
&pcie4_phy {
- vdda-phy-supply = <&vreg_l1c1>;
- vdda-pll-supply = <&vreg_l4f1>;
-
status = "okay";
};
@@ -841,9 +664,6 @@ &pcie5 {
};
&pcie5_phy {
- vdda-phy-supply = <&vreg_l2f0>;
- vdda-pll-supply = <&vreg_l4c0>;
-
status = "okay";
};
@@ -883,16 +703,6 @@ &remoteproc_soccp {
"qcom/glymur/ASUSTeK/UX3607OA/soccp_dtb.mbn";
};
-&smb2370_j_e2_eusb2_repeater {
- vdd18-supply = <&vreg_l15b0>;
- vdd3-supply = <&vreg_l7b0>;
-};
-
-&smb2370_k_e2_eusb2_repeater {
- vdd18-supply = <&vreg_l15b0>;
- vdd3-supply = <&vreg_l7b0>;
-};
-
&swr0 {
status = "okay";
@@ -949,26 +759,6 @@ right_tweeter: speaker@0,1 {
};
};
-&tcsr {
- vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrpt3-0p9-supply = <&vreg_l2c0>;
- vdda-qrefrpt4-0p9-supply = <&vreg_l2c0>;
- vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
- vdda-qrefrx4-0p9-supply = <&vreg_l2c0>;
- vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
- vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
- vdda-qreftx0-1p2-supply = <&vreg_l4c0>;
- vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
- vdda-refgen3-0p9-supply = <&vreg_l2f0>;
- vdda-refgen3-1p2-supply = <&vreg_l4c0>;
- vdda-refgen4-0p9-supply = <&vreg_l1f1>;
- vdda-refgen4-1p2-supply = <&vreg_l4f1>;
-};
-
&tlmm {
gpio-reserved-ranges = <4 4>, /* EC Secure I3C */
<10 2>, /* OOB UART */
@@ -1151,19 +941,12 @@ &usb_0_dwc3_hs {
};
&usb_0_hsphy {
- vdd-supply = <&vreg_l3f0>;
- vdda12-supply = <&vreg_l4c0>;
-
phys = <&smb2370_j_e2_eusb2_repeater>;
status = "okay";
};
&usb_0_qmpphy {
- vdda-phy-supply = <&vreg_l3f0>;
- vdda-pll-supply = <&vreg_l4c0>;
- refgen-supply = <&vreg_l2f0>;
-
status = "okay";
};
@@ -1180,19 +963,12 @@ &usb_1_dwc3_hs {
};
&usb_1_hsphy {
- vdd-supply = <&vreg_l3f0>;
- vdda12-supply = <&vreg_l4c0>;
-
phys = <&smb2370_k_e2_eusb2_repeater>;
status = "okay";
};
&usb_1_qmpphy {
- vdda-phy-supply = <&vreg_l1c0>;
- vdda-pll-supply = <&vreg_l4c0>;
- refgen-supply = <&vreg_l2f0>;
-
status = "okay";
};
@@ -1201,10 +977,6 @@ &usb_1_qmpphy_out {
};
&usb_2_qmpphy {
- vdda-phy-supply = <&vreg_l4c1>;
- vdda-pll-supply = <&vreg_l4f1>;
- refgen-supply = <&vreg_l4f1>;
-
/delete-property/ mode-switch;
/delete-property/ orientation-switch;
@@ -1233,9 +1005,6 @@ &usb_mp {
/* MP0 (eUSB3 + USBSS3) -> Type-A port */
&usb_mp_hsphy0 {
- vdd-supply = <&vreg_l2c0>;
- vdda12-supply = <&vreg_l4c0>;
-
phys = <&ptn3222_0>;
status = "okay";
@@ -1243,26 +1012,15 @@ &usb_mp_hsphy0 {
/* MP1 (eUSB6 + USBSS4) -> RTS5329 SD Card reader */
&usb_mp_hsphy1 {
- vdd-supply = <&vreg_l2c0>;
- vdda12-supply = <&vreg_l4c0>;
-
phys = <&ptn3222_1>;
status = "okay";
};
&usb_mp_qmpphy0 {
- vdda-phy-supply = <&vreg_l2c0>;
- vdda-pll-supply = <&vreg_l4c0>;
- refgen-supply = <&vreg_l4f1>;
-
status = "okay";
};
&usb_mp_qmpphy1 {
- vdda-phy-supply = <&vreg_l2c0>;
- vdda-pll-supply = <&vreg_l4c0>;
- refgen-supply = <&vreg_l4f1>;
-
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/glymur-sip.dtsi b/arch/arm64/boot/dts/qcom/glymur-sip.dtsi
new file mode 100644
index 000000000000..4acc002a36ee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-sip.dtsi
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common PMIC settings for on-SoC peripherals found on Glymur-SiP and
+ * derived platforms.
+ */
+
+#include "glymur.dtsi"
+#include "pmcx0102.dtsi"
+#include "pmh0101.dtsi"
+#include "pmh0110-glymur.dtsi"
+#include "pmh0104-glymur.dtsi"
+#include "pmk8850.dtsi"
+#include "smb2370.dtsi"
+
+/* Not present on SiP designs */
+/delete-node/ &pmh0104_l_e1;
+/delete-node/ &pmh0104_l1_thermal;
+/delete-node/ &pmh0110_h_e0;
+/delete-node/ &pmh0110_h0_thermal;
+
+&apps_rsc {
+ rpmh_vregs_b_e0: regulators-0 {
+ compatible = "qcom,pmh0101-rpmh-regulators";
+ qcom,pmic-id = "B_E0";
+
+ vreg_l1b0: ldo1 {
+ regulator-name = "vreg_l1b0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b0: ldo7 {
+ regulator-name = "vreg_l7b0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* Pull-ups etc. */
+ vreg_l10b0: ldo10 {
+ regulator-name = "vreg_l10b0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* Pull-ups etc. */
+ vreg_l11b0: ldo11 {
+ regulator-name = "vreg_l11b0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* Pull-ups etc. */
+ vreg_l15b0: ldo15 {
+ regulator-name = "vreg_l15b0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ /* Provides reference voltage for many undescribed components */
+ regulator-always-on;
+ };
+
+ /* Pull-ups etc. */
+ vreg_l18b0: ldo18 {
+ regulator-name = "vreg_l18b0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ /* Provides reference voltage for many undescribed components */
+ regulator-always-on;
+ };
+ };
+
+ rpmh_vregs_c_e0: regulators-1 {
+ compatible = "qcom,pmcx0102-rpmh-regulators";
+ qcom,pmic-id = "C_E0";
+
+ vreg_l1c0: ldo1 {
+ regulator-name = "vreg_l1c0";
+ regulator-min-microvolt = <936000>;
+ regulator-max-microvolt = <936000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c0: ldo2 {
+ regulator-name = "vreg_l2c0";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c0: ldo4 {
+ regulator-name = "vreg_l4c0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ rpmh_vregs_f_e0: regulators-2 {
+ compatible = "qcom,pmh0110-rpmh-regulators";
+ qcom,pmic-id = "F_E0";
+
+ vreg_l2f0: ldo2 {
+ regulator-name = "vreg_l2f0";
+ regulator-min-microvolt = <936000>;
+ regulator-max-microvolt = <936000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f0: ldo3 {
+ regulator-name = "vreg_l3f0";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ rpmh_vregs_c_e1: regulators-3 {
+ compatible = "qcom,pmcx0102-rpmh-regulators";
+ qcom,pmic-id = "C_E1";
+
+ vreg_l1c1: ldo1 {
+ regulator-name = "vreg_l1c1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c1: ldo2 {
+ regulator-name = "vreg_l2c1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c1: ldo3 {
+ regulator-name = "vreg_l3c1";
+ regulator-min-microvolt = <936000>;
+ regulator-max-microvolt = <936000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c1: ldo4 {
+ regulator-name = "vreg_l4c1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ rpmh_vregs_f_e1: regulators-4 {
+ compatible = "qcom,pmh0110-rpmh-regulators";
+ qcom,pmic-id = "F_E1";
+
+ vreg_l1f1: ldo1 {
+ regulator-name = "vreg_l1f1";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f1: ldo2 {
+ regulator-name = "vreg_l2f1";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4f1: ldo4 {
+ regulator-name = "vreg_l4f1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&lpass_vamacro {
+ vdd-micb-supply = <&vreg_l1b0>;
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l2f1>;
+ vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l1c1>;
+ vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&pcie3_phy {
+ vdda-phy-supply = <&vreg_l3c1>;
+ vdda-pll-supply = <&vreg_l2c1>;
+
+ vdda-refgen0p9-supply = <&vreg_l1c1>;
+ vdda-refgen1p2-supply = <&vreg_l4f1>;
+};
+
+&pcie5_phy {
+ vdda-phy-supply = <&vreg_l2f0>;
+ vdda-pll-supply = <&vreg_l4c0>;
+};
+
+&pcie6_phy {
+ vdda-phy-supply = <&vreg_l1c1>;
+ vdda-pll-supply = <&vreg_l4f1>;
+};
+
+&smb2370_j_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b0>;
+ vdd3-supply = <&vreg_l7b0>;
+};
+
+&smb2370_k_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b0>;
+ vdd3-supply = <&vreg_l7b0>;
+};
+
+&tcsr {
+ vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrpt3-0p9-supply = <&vreg_l2c0>;
+ vdda-qrefrpt4-0p9-supply = <&vreg_l2c0>;
+ vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
+ vdda-qrefrx4-0p9-supply = <&vreg_l2c0>;
+ vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
+ vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
+ vdda-qreftx0-1p2-supply = <&vreg_l4c0>;
+ vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
+ vdda-refgen3-0p9-supply = <&vreg_l2f0>;
+ vdda-refgen3-1p2-supply = <&vreg_l4c0>;
+ vdda-refgen4-0p9-supply = <&vreg_l1f1>;
+ vdda-refgen4-1p2-supply = <&vreg_l4f1>;
+};
+
+&usb_0_hsphy {
+ vdd-supply = <&vreg_l3f0>;
+ vdda12-supply = <&vreg_l4c0>;
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l3f0>;
+ vdda-pll-supply = <&vreg_l4c0>;
+ refgen-supply = <&vreg_l2f0>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l3f0>;
+ vdda12-supply = <&vreg_l4c0>;
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l1c0>;
+ vdda-pll-supply = <&vreg_l4c0>;
+ refgen-supply = <&vreg_l2f0>;
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l4c1>;
+ vdda12-supply = <&vreg_l4f1>;
+};
+
+&usb_2_qmpphy {
+ vdda-phy-supply = <&vreg_l4c1>;
+ vdda-pll-supply = <&vreg_l4f1>;
+ refgen-supply = <&vreg_l4f1>;
+};
+
+&usb_hs_phy {
+ vdd-supply = <&vreg_l2c0>;
+ vdda12-supply = <&vreg_l4c0>;
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2c0>;
+ vdda12-supply = <&vreg_l4c0>;
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2c0>;
+ vdda12-supply = <&vreg_l4c0>;
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l2c0>;
+ vdda-pll-supply = <&vreg_l4c0>;
+ refgen-supply = <&vreg_l4f1>;
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l2c0>;
+ vdda-pll-supply = <&vreg_l4c0>;
+ refgen-supply = <&vreg_l4f1>;
+};
--
2.56.0
next prev parent reply other threads:[~2026-11-06 9:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 9:29 [PATCH v3 0/8] Commonize Glymur regulator settings for fixed rails Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 1/8] arm64: dts: qcom: Unify Glymur/Mahua regulator handles Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 2/8] arm64: dts: qcom: Consolidate Glymur CoB power grid Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 3/8] arm64: dts: qcom: glymur: Drop L4F0 Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 4/8] arm64: dts: qcom: glymur-crd: Fix L8B0 voltage Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 5/8] dt-bindings: arm: qcom: Add Glymur SIP CRD Konrad Dybcio
2026-11-06 9:29 ` Konrad Dybcio [this message]
2026-11-06 9:29 ` [PATCH v3 7/8] arm64: dts: qcom: glymur-crd: Move DP0/DP1 to common dtsi Konrad Dybcio
2026-11-06 9:29 ` [PATCH v3 8/8] arm64: dts: qcom: Add Glymur SiP CRD Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261106-topic-sip_cob-v3-6-52cd3826ab49@oss.qualcomm.com \
--to=konradybcio@kernel.org \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=gopikrishna.garmidi@oss.qualcomm.com \
--cc=jyothi.seerapu@oss.qualcomm.com \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pankaj.patil@oss.qualcomm.com \
--cc=qiang.yu@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sibi.sankar@oss.qualcomm.com \
--cc=sivansh.gupta@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®