From: Jiaxing Hu <gahing@gahingwoo.com>
To: tomeu@tomeuvizoso.net, heiko@sntech.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, joro@8bytes.org,
will@kernel.org, robin.murphy@arm.com, ulfh@kernel.org,
p.zabel@pengutronix.de, ogabbay@kernel.org,
zhangqing@rock-chips.com
Cc: royalnet026@gmail.com, abel.vesa@oss.qualcomm.com,
sebastian.reichel@collabora.com, sidong.yang@furiosa.ai,
u.kleine-koenig@baylibre.com, chaoyi.chen@rock-chips.com,
shawn.lin@rock-chips.com, finley.xiao@rock-chips.com,
diederik@cknow-tech.com, alchark@flipper.net, leonard@lausen.nl,
jeff.hugo@oss.qualcomm.com, rfoss@kernel.org,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, iommu@lists.linux.dev,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jiaxing Hu <gahing@gahingwoo.com>
Subject: [PATCH v16 15/16] arm64: dts: rockchip: add NPU (RKNN) nodes to rk3576
Date: Sun, 8 Nov 2026 19:59:16 +1300 [thread overview]
Message-ID: <20261108065917.135194-16-gahing@gahingwoo.com> (raw)
In-Reply-To: <20261108065917.135194-1-gahing@gahingwoo.com>
Add the two NPU cores and their two IOMMUs, disabled by default; boards
enable them.
Each core is on its own power domain only: core 0 on PD_NPU0, core 1 on
PD_NPU1. Measured with both cores running, the results are correct, and
the nputop and npu domains above them are powered through the domain
hierarchy.
Label PD_NPU so a board can connect the NPU supply. The IOMMUs use four
clocks.
Also set CLK_RKNN_DSU0 to 594 MHz. Mainline sets neither its rate nor the
NPU voltage. On the ROCK 4D the DSU runs at 786 MHz by default and the
rail boots at 750 mV; with both cores running, each pass of the 5400-row
test has 11 to 25 wrong words. At 594 MHz the test is all correct. In the
vendor OPP table, the 500 MHz and 600 MHz steps both need 725 mV.
Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 70 +++++++++++++++++++++++-
1 file changed, 69 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 508ed48b7bee..667cbb6ad7b7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1131,7 +1131,7 @@ power: power-controller {
#address-cells = <1>;
#size-cells = <0>;
- power-domain@RK3576_PD_NPU {
+ pd_npu: power-domain@RK3576_PD_NPU {
reg = <RK3576_PD_NPU>;
#power-domain-cells = <1>;
#address-cells = <1>;
@@ -1358,6 +1358,74 @@ power-domain@RK3576_PD_VO1 {
};
};
+ rknn_core_0: npu@27700000 {
+ compatible = "rockchip,rk3576-rknn-core";
+ reg = <0x0 0x27700000 0x0 0x1000>,
+ <0x0 0x27701000 0x0 0x1000>,
+ <0x0 0x27703000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKNN0>, <&cru HCLK_RKNN_ROOT>,
+ <&cru CLK_RKNN_DSU0>, <&cru PCLK_NPUTOP_ROOT>,
+ <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+ clock-names = "aclk", "hclk", "npu", "pclk",
+ "aclk_cbuf", "hclk_cbuf";
+ assigned-clocks = <&cru CLK_RKNN_DSU0>;
+ assigned-clock-rates = <594000000>;
+ resets = <&cru SRST_A_RKNN0>;
+ reset-names = "srst_a";
+ power-domains = <&power RK3576_PD_NPU0>;
+ iommus = <&rknn_mmu_0>;
+ status = "disabled";
+ };
+
+ rknn_mmu_0: iommu@27702000 {
+ compatible = "rockchip,rk3576-npu-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0x27702000 0x0 0x100>,
+ <0x0 0x27702100 0x0 0x100>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKNN0>, <&cru HCLK_RKNN_ROOT>,
+ <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+ clock-names = "aclk", "iface", "aclk_cbuf", "hclk_cbuf";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3576_PD_NPU0>;
+ status = "disabled";
+ };
+
+ rknn_core_1: npu@27708000 {
+ compatible = "rockchip,rk3576-rknn-core";
+ reg = <0x0 0x27708000 0x0 0x1000>,
+ <0x0 0x27709000 0x0 0x1000>,
+ <0x0 0x2770b000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKNN1>, <&cru HCLK_RKNN_ROOT>,
+ <&cru CLK_RKNN_DSU0>, <&cru PCLK_NPUTOP_ROOT>,
+ <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+ clock-names = "aclk", "hclk", "npu", "pclk",
+ "aclk_cbuf", "hclk_cbuf";
+ assigned-clocks = <&cru CLK_RKNN_DSU0>;
+ assigned-clock-rates = <594000000>;
+ resets = <&cru SRST_A_RKNN1>;
+ reset-names = "srst_a";
+ power-domains = <&power RK3576_PD_NPU1>;
+ iommus = <&rknn_mmu_1>;
+ status = "disabled";
+ };
+
+ rknn_mmu_1: iommu@2770a000 {
+ compatible = "rockchip,rk3576-npu-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0x2770a000 0x0 0x100>,
+ <0x0 0x2770a100 0x0 0x100>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKNN1>, <&cru HCLK_RKNN_ROOT>,
+ <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+ clock-names = "aclk", "iface", "aclk_cbuf", "hclk_cbuf";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3576_PD_NPU1>;
+ status = "disabled";
+ };
+
gpu: gpu@27800000 {
compatible = "rockchip,rk3576-mali", "arm,mali-bifrost";
reg = <0x0 0x27800000 0x0 0x20000>;
--
2.43.0
next prev parent reply other threads:[~2026-11-08 7:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-08 6:59 [PATCH v16 00/16] accel/rocket: RK3576 NPU (RKNN) enablement Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 01/16] accel/rocket: request the core clocks by name Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 02/16] accel/rocket: take the completion register writes under job_lock Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 03/16] accel/rocket: wait for a running IRQ handler before resetting a core Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 04/16] accel/rocket: let the core suspend after a reset Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 05/16] accel/rocket: factor the completion tail out of the IRQ handler Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 06/16] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 07/16] dt-bindings: power: rockchip: allow resets in a power domain node Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 08/16] dt-bindings: iommu: rockchip: describe the RK3576 NPU MMU Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 09/16] pmdomain: rockchip: add optional per-domain power-on settle delay Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 10/16] pmdomain: rockchip: cycle an optional power-domain reset on power-on Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 11/16] accel/rocket: select the per-core clock and reset counts from match data Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 12/16] accel/rocket: add RK3576 NPU (RKNN) support Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 13/16] accel/rocket: add a GET_PARAM ioctl for the hardware version Jiaxing Hu
2026-11-08 6:59 ` [PATCH v16 14/16] arm64: dts: rockchip: add NPU core domain clocks and resets to rk3576 Jiaxing Hu
2026-11-08 6:59 ` Jiaxing Hu [this message]
2026-11-08 6:59 ` [PATCH v16 16/16] arm64: dts: rockchip: enable the NPU on rk3576-rock-4d Jiaxing Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261108065917.135194-16-gahing@gahingwoo.com \
--to=gahing@gahingwoo.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=alchark@flipper.net \
--cc=chaoyi.chen@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=diederik@cknow-tech.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=finley.xiao@rock-chips.com \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux.dev \
--cc=jeff.hugo@oss.qualcomm.com \
--cc=joro@8bytes.org \
--cc=krzk+dt@kernel.org \
--cc=leonard@lausen.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ogabbay@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=royalnet026@gmail.com \
--cc=sebastian.reichel@collabora.com \
--cc=shawn.lin@rock-chips.com \
--cc=sidong.yang@furiosa.ai \
--cc=tomeu@tomeuvizoso.net \
--cc=u.kleine-koenig@baylibre.com \
--cc=ulfh@kernel.org \
--cc=will@kernel.org \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®