[PATCH 00/17] Add initial support for Qualcomm Halliday and Samsung Galaxy XR

[PATCH 00/17] Add initial support for Qualcomm Halliday and Samsung Galaxy XR

[Stanislav Aleksandrov]

This series introduces initial Devicetree support for the Qualcomm Halliday
(SXR2250P / Snapdragon XR2+ Gen 2) and the Samsung Galaxy XR headset
(board compatible "samsung,xrvst2").

With this DT and the driver series, the headset boots to an initramfs
with a shell over USB NCM.

UFS, cpufreq and the thermal zones work too. PCIe with Wi-Fi and more
will follow.

Dependencies:
- The dts patches only need the Halliday TLMM, clock and interconnect
  series:
  https://lore.kernel.org/r/20261109-halliday-tlmm-v1-0-a181d54214cd@gmail.com
  https://lore.kernel.org/r/20261109-halliday-clk-v1-0-20c3ba8be0bd@gmail.com
  https://lore.kernel.org/r/20261109-halliday-icc-v1-0-def7cf786f75@gmail.com

The SoC ID was sent separately:
https://lore.kernel.org/r/20261108-sxr2250p-socinfo-v1-0-06244862f5c6@gmail.com

This work was made together with Claude, ChatGPT and Gemini.
Reviewed and tested on my Galaxy XR.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Stanislav Aleksandrov (17):
      dt-bindings: arm: qcom-soc: Add Halliday
      dt-bindings: firmware: qcom,scm: Document Halliday SCM
      dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
      dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains
      dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR
      dt-bindings: arm-smmu: Add Halliday SMMU
      dt-bindings: usb: qcom,snps-dwc3: Add Halliday
      dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY
      dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS
      dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday
      dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday
      dt-bindings: cpufreq: qcom-hw: Document Halliday CPUFREQ hardware
      dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor
      dt-bindings: interconnect: OSM L3: Add Halliday EPSS L3 compatible
      dt-bindings: arm: qcom: Add Samsung Galaxy XR
      arm64: dts: qcom: Add initial Halliday dtsi
      arm64: dts: qcom: Add Samsung Galaxy XR

 .../devicetree/bindings/arm/qcom-soc.yaml          |    4 +-
 Documentation/devicetree/bindings/arm/qcom.yaml    |    5 +
 .../bindings/cpufreq/cpufreq-qcom-hw.yaml          |    2 +
 .../bindings/crypto/qcom,inline-crypto-engine.yaml |    1 +
 .../devicetree/bindings/firmware/qcom,scm.yaml     |    2 +
 .../bindings/interconnect/qcom,osm-l3.yaml         |    1 +
 .../bindings/interrupt-controller/qcom,pdc.yaml    |    1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml        |    2 +
 .../devicetree/bindings/mfd/qcom,tcsr.yaml         |    1 +
 .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml    |    4 +
 .../bindings/phy/qcom,usb-snps-femto-v2.yaml       |    1 +
 .../devicetree/bindings/power/qcom,rpmpd.yaml      |    4 +
 .../devicetree/bindings/thermal/qcom-tsens.yaml    |    1 +
 .../devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml |    2 +
 .../devicetree/bindings/usb/qcom,snps-dwc3.yaml    |    3 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../boot/dts/qcom/halliday-samsung-xrvst2.dts      |  218 +++
 arch/arm64/boot/dts/qcom/halliday.dtsi             | 1859 ++++++++++++++++++++
 18 files changed, 2110 insertions(+), 2 deletions(-)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261108-halliday-dts-e6ed3a2b5cd0
prerequisite-change-id: 20261108-halliday-tlmm-f250374110e0:v1
prerequisite-patch-id: 5a614cbb038d4083d1ce56b413923dfb4e7c2fd7
prerequisite-patch-id: 36f2dcc3de10d5ccba9eee25b73736189559162a
prerequisite-change-id: 20261108-halliday-clk-362190f4f5dd:v1
prerequisite-patch-id: 765d40b7543dba6580852939a5c3d177f12d0a1e
prerequisite-patch-id: f12c958fceb125bcefd8dc9de139f30a371f85a4
prerequisite-patch-id: a6559b14fa1badec8e7752940362d68306523557
prerequisite-patch-id: 3574a3f99dc1a987a61b4e4a73e0204142604a73
prerequisite-patch-id: 5ff25f591783dea61a6719bffe3961070f7167e1
prerequisite-change-id: 20261108-halliday-icc-65a5442be859:v1
prerequisite-patch-id: 94cd5dee75e96876c6a42852cf6d1b52df1c7ace
prerequisite-patch-id: 730c6d80310f7472ecbcfbdb84dff4cc864d99af

Best regards,
--  
Stanislav Aleksandrov <lightofmysoul@gmail.com>

[PATCH 01/17] dt-bindings: arm: qcom-soc: Add Halliday

[Stanislav Aleksandrov]

Add Halliday to the SoC codenames allowed in Qualcomm compatibles.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
index 179aadc86a9f..9d392329d437 100644
--- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -30,7 +30,7 @@ select:
       contains:
         oneOf:
           - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
-          - pattern: "^qcom,.*(eliza|kaanapali|kuno|glymur|hawi|mahua|maili|milos|nord|shikra).*$"
+          - pattern: "^qcom,.*(eliza|kaanapali|kuno|glymur|halliday|hawi|mahua|maili|milos|nord|shikra).*$"
   required:
     - compatible
 
@@ -42,7 +42,7 @@ properties:
         - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$"
         - pattern: "^qcom,sar[0-9]+[a-z]?-.*$"
         - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
-        - pattern: "^qcom,(eliza|kaanapali|kuno|glymur|hawi|mahua|maili|milos|nord|shikra)-.+$"
+        - pattern: "^qcom,(eliza|kaanapali|kuno|glymur|halliday|hawi|mahua|maili|milos|nord|shikra)-.+$"
 
         # Legacy namings - variations of existing patterns/compatibles are OK,
         # but do not add completely new entries to these:

-- 
2.55.0

[PATCH 02/17] dt-bindings: firmware: qcom,scm: Document Halliday SCM

[Stanislav Aleksandrov]

Document the SCM on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 40a267c54b00..fb3da66443ed 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -25,6 +25,7 @@ properties:
           - qcom,scm-apq8084
           - qcom,scm-eliza
           - qcom,scm-glymur
+          - qcom,scm-halliday
           - qcom,scm-hawi
           - qcom,scm-ipq4019
           - qcom,scm-ipq5018
@@ -225,6 +226,7 @@ allOf:
             contains:
               enum:
                 - qcom,scm-eliza
+                - qcom,scm-halliday
                 - qcom,scm-hawi
                 - qcom,scm-kaanapali
                 - qcom,scm-maili

-- 
2.55.0

[PATCH 03/17] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC

[Stanislav Aleksandrov]

Document the Power Domain Controller on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index 8401d3b48e0f..cf20041e86c8 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -28,6 +28,7 @@ properties:
       - enum:
           - qcom,eliza-pdc
           - qcom,glymur-pdc
+          - qcom,halliday-pdc
           - qcom,hawi-pdc
           - qcom,kaanapali-pdc
           - qcom,kuno-pdc

-- 
2.55.0

[PATCH 04/17] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains

[Stanislav Aleksandrov]

Document the RPMh Power Domains on the Qualcomm Halliday SoC
(SXR2250P). Its command DB has the same power domains as SM8450
(CX, EBI, GFX, LCX, LMX, MMCX, MSS, MX and MXC), so use
qcom,sm8450-rpmhpd as the fallback compatible.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/power/qcom,rpmpd.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 8ee1c25a7c9d..663baae9cc64 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -82,6 +82,10 @@ properties:
           - enum:
               - qcom,maili-rpmhpd
           - const: qcom,hawi-rpmhpd
+      - items:
+          - enum:
+              - qcom,halliday-rpmhpd
+          - const: qcom,sm8450-rpmhpd
 
   '#power-domain-cells':
     const: 1

-- 
2.55.0

[PATCH 05/17] dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR

[Stanislav Aleksandrov]

Document the TCSR block on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index a021e4dea486..e8a681b5e6ad 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,halliday-tcsr
           - qcom,hawi-tcsr
           - qcom,maili-tcsr
           - qcom,msm8976-tcsr

-- 
2.55.0

[PATCH 06/17] dt-bindings: arm-smmu: Add Halliday SMMU

[Stanislav Aleksandrov]

Document the SMMU-500 on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 6748351c7812..925afa8cca8d 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -37,6 +37,7 @@ properties:
           - enum:
               - qcom,eliza-smmu-500
               - qcom,glymur-smmu-500
+              - qcom,halliday-smmu-500
               - qcom,hawi-smmu-500
               - qcom,ipq9650-smmu-500
               - qcom,kaanapali-smmu-500
@@ -629,6 +630,7 @@ allOf:
             - enum:
                 - qcom,eliza-smmu-500
                 - qcom,glymur-smmu-500
+                - qcom,halliday-smmu-500
                 - qcom,hawi-smmu-500
                 - qcom,ipq9650-smmu-500
                 - qcom,kaanapali-smmu-500

-- 
2.55.0

[PATCH 07/17] dt-bindings: usb: qcom,snps-dwc3: Add Halliday

[Stanislav Aleksandrov]

Document the DWC3 USB controller on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index b77c02c64d45..7a8b72d2929d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -27,6 +27,7 @@ properties:
           - qcom,eliza-dwc3
           - qcom,glymur-dwc3
           - qcom,glymur-dwc3-mp
+          - qcom,halliday-dwc3
           - qcom,hawi-dwc3
           - qcom,ipq4019-dwc3
           - qcom,ipq5018-dwc3
@@ -209,6 +210,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,halliday-dwc3
               - qcom,hawi-dwc3
               - qcom,ipq5210-dwc3
               - qcom,ipq5424-dwc3
@@ -570,6 +572,7 @@ allOf:
           contains:
             enum:
               - qcom,eliza-dwc3
+              - qcom,halliday-dwc3
               - qcom,hawi-dwc3
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3

-- 
2.55.0

[PATCH 08/17] dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY

[Stanislav Aleksandrov]

Document the Synopsys femto USB high-speed PHY on the Qualcomm Halliday
SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 661759b25064..8ff1db4a1d79 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -22,6 +22,7 @@ properties:
           - const: qcom,usb-snps-hs-5nm-phy
       - items:
           - enum:
+              - qcom,halliday-usb-hs-phy
               - qcom,qcs8300-usb-hs-phy
               - qcom,qdu1000-usb-hs-phy
               - qcom,sc7280-usb-hs-phy

-- 
2.55.0

[PATCH 09/17] dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS

[Stanislav Aleksandrov]

Document the UFS host controller on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
index 3c407426d697..5d1784baddd7 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
@@ -15,6 +15,7 @@ select:
     compatible:
       contains:
         enum:
+          - qcom,halliday-ufshc
           - qcom,milos-ufshc
           - qcom,msm8998-ufshc
           - qcom,qcs8300-ufshc
@@ -40,6 +41,7 @@ properties:
           - const: qcom,ufshc
       - items:
           - enum:
+              - qcom,halliday-ufshc
               - qcom,milos-ufshc
               - qcom,msm8998-ufshc
               - qcom,qcs8300-ufshc

-- 
2.55.0

[PATCH 10/17] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday

[Stanislav Aleksandrov]

Document the QMP UFS PHY on the Qualcomm Halliday SoC, which is
compatible with the SM8450 one.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 10435a0b5230..a42bba9b550d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -28,6 +28,10 @@ properties:
           - enum:
               - qcom,qcs615-qmp-ufs-phy
           - const: qcom,sm6115-qmp-ufs-phy
+      - items:
+          - enum:
+              - qcom,halliday-qmp-ufs-phy
+          - const: qcom,sm8450-qmp-ufs-phy
       - items:
           - enum:
               - qcom,x1e80100-qmp-ufs-phy

-- 
2.55.0

[PATCH 11/17] dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday

[Stanislav Aleksandrov]

Document the Inline Crypto Engine on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index 23bf98c2b9fa..1512fd1d7471 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - qcom,eliza-inline-crypto-engine
+          - qcom,halliday-inline-crypto-engine
           - qcom,hawi-inline-crypto-engine
           - qcom,kaanapali-inline-crypto-engine
           - qcom,maili-inline-crypto-engine

-- 
2.55.0

[PATCH 12/17] dt-bindings: cpufreq: qcom-hw: Document Halliday CPUFREQ hardware

[Stanislav Aleksandrov]

Document the CPUFREQ hardware (EPSS) on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
index 98eb36bff172..d6040cd293f9 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -36,6 +36,7 @@ properties:
         items:
           - enum:
               - qcom,eliza-cpufreq-epss
+              - qcom,halliday-cpufreq-epss
               - qcom,milos-cpufreq-epss
               - qcom,qcs8300-cpufreq-epss
               - qcom,qdu1000-cpufreq-epss
@@ -135,6 +136,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,halliday-cpufreq-epss
               - qcom,qcs615-cpufreq-hw
               - qcom,qdu1000-cpufreq-epss
               - qcom,sa8255p-cpufreq-epss

-- 
2.55.0

[PATCH 13/17] dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor

[Stanislav Aleksandrov]

Document the Temperature Sensor (TSENS) on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index c78074fbcecf..3b440f395fe8 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -57,6 +57,7 @@ properties:
           - enum:
               - qcom,eliza-tsens
               - qcom,glymur-tsens
+              - qcom,halliday-tsens
               - qcom,hawi-tsens
               - qcom,kaanapali-tsens
               - qcom,maili-tsens

-- 
2.55.0

[PATCH 14/17] dt-bindings: interconnect: OSM L3: Add Halliday EPSS L3 compatible

[Stanislav Aleksandrov]

Document the EPSS L3 interconnect on the Qualcomm Halliday SoC.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index cd6685683bab..6c3475005a35 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -31,6 +31,7 @@ properties:
       - items:
           - enum:
               - qcom,eliza-epss-l3
+              - qcom,halliday-epss-l3
               - qcom,milos-epss-l3
               - qcom,sa8775p-epss-l3
               - qcom,sc7280-epss-l3

-- 
2.55.0

[PATCH 15/17] dt-bindings: arm: qcom: Add Samsung Galaxy XR

[Stanislav Aleksandrov]

Document the Samsung Galaxy XR headset, which is based on the Qualcomm
Halliday SoC (SXR2250P).

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 121ca557ce1e..b96ee339956d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -94,6 +94,11 @@ properties:
               - qcom,glymur-qcb
           - const: qcom,glymur
 
+      - items:
+          - enum:
+              - samsung,xrvst2
+          - const: qcom,halliday
+
       - items:
           - enum:
               - 8dev,jalapeno

-- 
2.55.0

[PATCH 16/17] arm64: dts: qcom: Add initial Halliday dtsi

[Stanislav Aleksandrov]

Add the device tree for the Qualcomm Halliday SoC
(SXR2250P / Snapdragon XR2+ Gen 2).

It describes the CPUs with their idle states, cpufreq and OPP tables,
the GIC and the PDC, the timers, SCM, SMEM, RPMh with its clocks, power
domains and interconnects, TLMM, GCC, SPMI, the apps SMMU, USB, UFS
with ICE, TSENS with the thermal zones and the PMU.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 arch/arm64/boot/dts/qcom/halliday.dtsi | 1859 ++++++++++++++++++++++++++++++++
 1 file changed, 1859 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/halliday.dtsi b/arch/arm64/boot/dts/qcom/halliday.dtsi
new file mode 100644
index 000000000000..c891913e3cc1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/halliday.dtsi
@@ -0,0 +1,1859 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026, Stanislav Aleksandrov <lightofmysoul@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,halliday-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,halliday-rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0x200>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1075>;
+			dynamic-power-coefficient = <85>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0x300>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1075>;
+			dynamic-power-coefficient = <85>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1075>;
+			dynamic-power-coefficient = <85>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			l2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1075>;
+			dynamic-power-coefficient = <85>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			l2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <9309>;
+				arm,psci-suspend-param = <0x41000044>;
+			};
+
+			cluster_sleep_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				entry-latency-us = <2700>;
+				exit-latency-us = <3500>;
+				min-residency-us = <13959>;
+				arm,psci-suspend-param = <0x4100c344>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			gold_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				entry-latency-us = <400>;
+				exit-latency-us = <1400>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+				arm,psci-suspend-param = <0x40000003>;
+			};
+
+			gold_cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+				arm,psci-suspend-param = <0x40000004>;
+			};
+
+			gold_plus_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-power-collapse";
+				entry-latency-us = <300>;
+				exit-latency-us = <1450>;
+				min-residency-us = <3230>;
+				local-timer-stop;
+				arm,psci-suspend-param = <0x40000003>;
+			};
+
+			gold_plus_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+				arm,psci-suspend-param = <0x40000004>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-halliday", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,halliday-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,halliday-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (422400 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466500 * 16) (547000 * 4) (691200 * 32)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			opp-peak-kBps = <(466500 * 16) (547000 * 4) (825600 * 32)>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <(600000 * 16) (768000 * 4) (1075200 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1209600 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1612800 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (422400 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466500 * 16) (547000 * 4) (691200 * 32)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			opp-peak-kBps = <(466500 * 16) (547000 * 4) (825600 * 32)>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <(600000 * 16) (768000 * 4) (1075200 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1209600 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1612800 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(933000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>;
+		};
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		hyp_qheebsp_mem: hyp-qheebsp-region@80000000 {
+			reg = <0 0x80000000 0 0x200000>;
+			no-map;
+		};
+
+		hyp_data_mem: hyp-data-region@80200000 {
+			reg = <0 0x80200000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_rm_hypx_mem: hyp-rm-hypx-region@80600000 {
+			reg = <0 0x80600000 0 0x200000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-region@80800000 {
+			reg = <0 0x80800000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_heap_mem: hyp-heap-region@80c00000 {
+			reg = <0 0x80c00000 0 0x200000>;
+			no-map;
+		};
+
+		hyp_tags_mem: hyp-tags-region@80e00000 {
+			reg = <0 0x80e00000 0 0x3d0000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: xbl-dt-log-region@81a00000 {
+			reg = <0 0x81a00000 0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump-region@81a40000 {
+			reg = <0 0x81a40000 0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image-region@81c00000 {
+			reg = <0 0x81c00000 0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config-region@81c80000 {
+			reg = <0 0x81c80000 0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump-region@81ca0000 {
+			reg = <0 0x81ca0000 0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log-region@81ce0000 {
+			reg = <0 0x81ce0000 0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log-region@81ce4000 {
+			reg = <0 0x81ce4000 0 0x10000>;
+			no-map;
+		};
+
+		chipinfo_mem: chipinfo-region@81cf4000 {
+			reg = <0 0x81cf4000 0 0x1000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss-region@81cff000 {
+			reg = <0 0x81cff000 0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync-region@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		video_mem: video-region@88d00000 {
+			reg = <0 0x88d00000 0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@89400000 {
+			reg = <0 0x89400000 0 0x2100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@8b500000 {
+			reg = <0 0x8b500000 0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@8d500000 {
+			reg = <0 0x8d500000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@8d510000 {
+			reg = <0 0x8d510000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode-region@8d51a000 {
+			reg = <0 0x8d51a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: spss-region@8d600000 {
+			reg = <0 0x8d600000 0 0x180000>;
+			no-map;
+		};
+
+		spu_tz_shared_mem: spu-tz-shared-region@8d780000 {
+			reg = <0 0x8d780000 0 0x80000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@8d800000 {
+			reg = <0 0x8d800000 0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@8df00000 {
+			reg = <0 0x8df00000 0 0x800000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw-region@d8000000 {
+			reg = <0 0xd8000000 0 0x100000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8100000 {
+			reg = <0 0xd8100000 0 0x40000>;
+			no-map;
+		};
+
+		tz_reserved_mem: tz-reserved-region@d8140000 {
+			reg = <0 0xd8140000 0 0x1c0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d8300000 {
+			reg = <0 0xd8300000 0 0x500000>;
+			no-map;
+		};
+
+		ta_mem: ta-region@d8800000 {
+			reg = <0 0xd8800000 0 0x3000000>;
+			no-map;
+		};
+
+		tz_tags_mem: tz-tags-region@db800000 {
+			reg = <0 0xdb800000 0 0xf00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,halliday-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,halliday-config-noc";
+			reg = <0 0x01500000 0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,halliday-system-noc";
+			reg = <0 0x01680000 0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,halliday-pcie-anoc";
+			reg = <0 0x016c0000 0 0xc080>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SF_AXI_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,halliday-aggre1-noc";
+			reg = <0 0x016e0000 0 0x9080>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,halliday-aggre2-noc";
+			reg = <0 0x01700000 0 0x15080>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,halliday-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,halliday-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			operating-points-v2 = <&ufs_opp_table>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			#reset-cells = <1>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
+
+			lanes-per-direction = <2>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000 0 0 75000000 0 0 0 0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000 0 0 150000000 0 0 0 0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000 0 0 300000000 0 0 0 0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,halliday-qmp-ufs-phy", "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,halliday-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+
+			operating-points-v2 = <&ice_opp_table>;
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			ice_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,halliday-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,halliday-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,halliday-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+
+			clocks = <&gcc GCC_USB2_0_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,halliday-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			iommus = <&apps_smmu 0x40 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			phys = <&usb_1_hsphy>;
+			phy-names = "usb2-phy";
+
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,halliday-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>,
+			      <0 0x174000f0 0 0x64>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+			qcom,pdc-ranges = <0 480 94>,
+					  <94 609 31>,
+					  <125 63 1>,
+					  <126 716 12>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,halliday-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1000>,
+			      <0 0x0c222000 0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <16>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,halliday-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1000>,
+			      <0 0x0c223000 0 0x1000>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <15>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x400000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,halliday-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 225>;
+			wakeup-parent = <&pdc>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,halliday-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17200000 0 0x10000>,
+			      <0 0x17260000 0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			label = "apps_rsc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&cluster_pd>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+					  <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,halliday-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,halliday-rpmhpd", "qcom,sm8450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l0: opp-288 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L0>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l0: opp-400 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L0>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+
+					rpmhpd_opp_turbo_l2: opp-432 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+					};
+				};
+			};
+		};
+
+		epss_l3: interconnect@17d90000 {
+			compatible = "qcom,halliday-epss-l3", "qcom,epss-l3";
+			reg = <0 0x17d90000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,halliday-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,halliday-gem-noc";
+			reg = <0 0x19100000 0 0xa9080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,halliday-nsp-noc";
+			reg = <0 0x320c0000 0 0x10000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				aoss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				aoss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				camera0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				camera1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				camera1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu0-0-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu0-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-1-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu0-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-0-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu1-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-1-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu1-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-0-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu2-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-1-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu2-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-0-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu3-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-1-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu3-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-0-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-1-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu4-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-0-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu5-0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-1-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu5-1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0_thermal: cpuss0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpuss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1_thermal: cpuss1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpuss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		ddr-thermal {
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				ddr-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				ddr-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				gpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				gpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				gpuss2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				gpuss3-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				gpuss4-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss4-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				gpuss5-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss5-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				gpuss6-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss6-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				gpuss7-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpuss7-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nsp0-thermal {
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				nsp0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				nsp0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nsp1-thermal {
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				nsp1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				nsp1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nsp2-thermal {
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				nsp2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				nsp2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				video-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				video-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};

-- 
2.55.0

[PATCH 17/17] arm64: dts: qcom: Add Samsung Galaxy XR

[Stanislav Aleksandrov]

Add the device tree for the Samsung Galaxy XR headset, which is based on
the Qualcomm Halliday SoC (SXR2250P).

Supported so far: the PMICs and their regulators, the power and volume
down keys, USB in high-speed peripheral mode and UFS storage.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/halliday-samsung-xrvst2.dts      | 218 +++++++++++++++++++++
 2 files changed, 219 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 88230c4e00ea..1a2638503f64 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= glymur-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-hp-elitebook-x-g2q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-lenovo-yoga-slim7x.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-qcb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= halliday-samsung-xrvst2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-advantech-som-db5830.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
new file mode 100644
index 000000000000..6fcc1aaafd59
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026, Stanislav Aleksandrov <lightofmysoul@gmail.com>
+ */
+
+/dts-v1/;
+
+#define PMK8550VE_SID 5
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "halliday.dtsi"
+#include "pm7550.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+
+/ {
+	model = "Samsung Galaxy XR";
+	compatible = "samsung,xrvst2", "qcom,halliday";
+	chassis-type = "headset";
+
+	reserved-memory {
+		video_mem: video-region@87c00000 {
+			reg = <0x0 0x87c00000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@88300000 {
+			reg = <0x0 0x88300000 0x0 0x3400000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@8b700000 {
+			reg = <0x0 0x8b700000 0x0 0xf00000>;
+			no-map;
+		};
+
+		sec_xbl_ramdump_mem: sec-xbl-ramdump-region@a7d00000 {
+			reg = <0x0 0xa7d00000 0x0 0x300000>;
+			no-map;
+		};
+
+		uh_heap_mem: uh-heap-region@b0200000 {
+			reg = <0x0 0xb0200000 0x0 0x40000>;
+			no-map;
+		};
+
+		uh_guest_mem: uh-guest-region@b1000000 {
+			reg = <0x0 0xb1000000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		splash_mem: splash-region@bfc00000 {
+			reg = <0x0 0xbfc00000 0x0 0x7e90000>;
+			no-map;
+		};
+
+		sec_debug_pool_mem: sec-debug-pool-region@800100000 {
+			reg = <0x8 0x00100000 0x0 0xff000>;
+			no-map;
+		};
+
+		sec_debug_log_mem: sec-debug-log-region@8001ff000 {
+			reg = <0x8 0x001ff000 0x0 0x901000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_1p2: ldo3 {
+			regulator-name = "vreg_l3b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_2p504: ldo13 {
+			regulator-name = "vreg_l13b_2p504";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_3p072: ldo15 {
+			regulator-name = "vreg_l15b_3p072";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gcc {
+	vdda-refgen-0p9-supply = <&vreg_l2f_0p88>;
+	vdda-refgen-1p2-supply = <&vreg_l2c_1p2>;
+};
+
+&pm8550vs_c {
+	status = "okay";
+};
+
+&pm8550vs_d {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 224 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l13b_2p504>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l3b_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l2f_0p88>;
+	vdda-pll-supply = <&vreg_l2c_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l1d_0p88>;
+	vdda18-supply = <&vreg_l10b_1p8>;
+	vdda33-supply = <&vreg_l15b_3p072>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};

-- 
2.55.0