* [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers
@ 2026-11-09 16:25 Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 1/4] ARM: dts: stm32: Use hex timer addresses on stm32mp13 Fabrice Gasnier
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Fabrice Gasnier @ 2026-11-09 16:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Christoph Niedermaier, Marek Vasut,
Goran Rađenović,
Börge Strümpfel
Cc: devicetree, linux-stm32, linux-arm-kernel, linux-kernel, kernel,
Fabrice Gasnier
This series intends to comply with hexadecimal unit addresses for timer
subnodes as described in ("dt-bindings: Use hex unit address patterns").
Also update hexadecimal format for 'reg' property in these nodes. Take
care to update the boards accordingly. Note there aren't in-tree overlays
impacted.
Purpose is to avoid upcoming new dtbs_check logs like:
make CHECK_DTBS=y st/stm32mp135f-dk.dtb
...
stm32mp135f-dk.dtb: timer@4c00a000 (st,stm32-timers): 'timer@14' does not
match any of the regexes: '^pinctrl-[0-9]+$', '^timer@([0-9a-f]|1[0-3])$'
from schema $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml
...
Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@kernel.org/
---
Fabrice Gasnier (4):
ARM: dts: stm32: Use hex timer addresses on stm32mp13
ARM: dts: stm32: Use hex timer addresses on stm32mp15
ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay
arm64: dts: stm32: Use hex timer addresses on stm32mp251
arch/arm/boot/dts/st/stm32mp131.dtsi | 46 ++++++++---------
arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts | 2 +-
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 2 +-
arch/arm/boot/dts/st/stm32mp151.dtsi | 46 ++++++++---------
arch/arm/boot/dts/st/stm32mp157c-ev1.dts | 2 +-
arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts | 2 +-
.../st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi | 2 +-
arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi | 2 +-
arch/arm64/boot/dts/st/stm32mp251.dtsi | 60 +++++++++++-----------
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 2 +-
10 files changed, 83 insertions(+), 83 deletions(-)
---
base-commit: f39a4c5c819bcf18c7543cccdfd2215ceb4daa53
change-id: 20261109-timer-use-hex-unit-addr-545d9dbd3331
Best regards,
--
Fabrice Gasnier <fabrice.gasnier@foss.st.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/4] ARM: dts: stm32: Use hex timer addresses on stm32mp13
2026-11-09 16:25 [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers Fabrice Gasnier
@ 2026-11-09 16:25 ` Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 2/4] ARM: dts: stm32: Use hex timer addresses on stm32mp15 Fabrice Gasnier
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Fabrice Gasnier @ 2026-11-09 16:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Christoph Niedermaier, Marek Vasut,
Goran Rađenović,
Börge Strümpfel
Cc: devicetree, linux-stm32, linux-arm-kernel, linux-kernel, kernel,
Fabrice Gasnier
Use hexadecimal unit addresses for timer subnodes. This has been raised
since ("dt-bindings: Use hex unit address patterns").
Also:
- adopt hexadecimal format for reg properties.
- update stm32mp135f-dhcor-dhsbc and stm32mp135f-dk accordingly as
they use timer 13 and 14.
Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 46 ++++++++++++------------
arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts | 2 +-
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 2 +-
3 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ae45c2023afe..dffabf19b615 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -188,7 +188,7 @@ pwm {
timer@1 {
compatible = "st,stm32h7-timer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
@@ -224,7 +224,7 @@ pwm {
timer@2 {
compatible = "st,stm32h7-timer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
@@ -258,7 +258,7 @@ pwm {
timer@3 {
compatible = "st,stm32h7-timer-trigger";
- reg = <3>;
+ reg = <0x3>;
status = "disabled";
};
@@ -294,7 +294,7 @@ pwm {
timer@4 {
compatible = "st,stm32h7-timer-trigger";
- reg = <4>;
+ reg = <0x4>;
status = "disabled";
};
@@ -324,7 +324,7 @@ counter {
timer@5 {
compatible = "st,stm32h7-timer-trigger";
- reg = <5>;
+ reg = <0x5>;
status = "disabled";
};
};
@@ -349,7 +349,7 @@ counter {
timer@6 {
compatible = "st,stm32h7-timer-trigger";
- reg = <6>;
+ reg = <0x6>;
status = "disabled";
};
};
@@ -373,7 +373,7 @@ pwm {
trigger@0 {
compatible = "st,stm32-lptimer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
@@ -585,7 +585,7 @@ pwm {
timer@0 {
compatible = "st,stm32h7-timer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
@@ -626,7 +626,7 @@ pwm {
timer@7 {
compatible = "st,stm32h7-timer-trigger";
- reg = <7>;
+ reg = <0x7>;
status = "disabled";
};
@@ -1417,9 +1417,9 @@ pwm {
status = "disabled";
};
- timer@11 {
+ timer@b {
compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
+ reg = <0xb>;
status = "disabled";
};
};
@@ -1447,9 +1447,9 @@ pwm {
status = "disabled";
};
- timer@12 {
+ timer@c {
compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
+ reg = <0xc>;
status = "disabled";
};
};
@@ -1477,9 +1477,9 @@ pwm {
status = "disabled";
};
- timer@13 {
+ timer@d {
compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
+ reg = <0xd>;
status = "disabled";
};
};
@@ -1512,9 +1512,9 @@ pwm {
status = "disabled";
};
- timer@14 {
+ timer@e {
compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
+ reg = <0xe>;
status = "disabled";
};
};
@@ -1545,9 +1545,9 @@ pwm {
status = "disabled";
};
- timer@15 {
+ timer@f {
compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
+ reg = <0xf>;
status = "disabled";
};
};
@@ -1578,9 +1578,9 @@ pwm {
status = "disabled";
};
- timer@16 {
+ timer@10 {
compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
+ reg = <0x10>;
status = "disabled";
};
};
@@ -1605,7 +1605,7 @@ pwm {
trigger@1 {
compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
@@ -1640,7 +1640,7 @@ pwm {
trigger@2 {
compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
index 70d85af46735..9b8baed6a022 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
@@ -349,7 +349,7 @@ pwm {
pinctrl-names = "default", "sleep";
status = "okay";
};
- timer@12 {
+ timer@c {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 2d6c5af7e481..b2a01a0f9a3a 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -563,7 +563,7 @@ pwm {
pinctrl-names = "default", "sleep";
status = "okay";
};
- timer@13 {
+ timer@d {
status = "okay";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/4] ARM: dts: stm32: Use hex timer addresses on stm32mp15
2026-11-09 16:25 [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 1/4] ARM: dts: stm32: Use hex timer addresses on stm32mp13 Fabrice Gasnier
@ 2026-11-09 16:25 ` Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 3/4] ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 4/4] arm64: dts: stm32: Use hex timer addresses on stm32mp251 Fabrice Gasnier
3 siblings, 0 replies; 5+ messages in thread
From: Fabrice Gasnier @ 2026-11-09 16:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Christoph Niedermaier, Marek Vasut,
Goran Rađenović,
Börge Strümpfel
Cc: devicetree, linux-stm32, linux-arm-kernel, linux-kernel, kernel,
Fabrice Gasnier
Use hexadecimal unit addresses for timer subnodes. This has been raised
since ("dt-bindings: Use hex unit address patterns").
Also:
- adopt hexadecimal format for reg properties.
- update MP15 boards accordingly as they use timers 12 and 17.
Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp151.dtsi | 46 +++++++++++-----------
arch/arm/boot/dts/st/stm32mp157c-ev1.dts | 2 +-
arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts | 2 +-
arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi | 2 +-
4 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index ae3188373238..71f81f25af0e 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -632,7 +632,7 @@ pwm {
timer@1 {
compatible = "st,stm32h7-timer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
@@ -669,7 +669,7 @@ pwm {
timer@2 {
compatible = "st,stm32h7-timer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
@@ -704,7 +704,7 @@ pwm {
timer@3 {
compatible = "st,stm32h7-timer-trigger";
- reg = <3>;
+ reg = <0x3>;
status = "disabled";
};
@@ -741,7 +741,7 @@ pwm {
timer@4 {
compatible = "st,stm32h7-timer-trigger";
- reg = <4>;
+ reg = <0x4>;
status = "disabled";
};
@@ -772,7 +772,7 @@ counter {
timer@5 {
compatible = "st,stm32h7-timer-trigger";
- reg = <5>;
+ reg = <0x5>;
status = "disabled";
};
};
@@ -798,7 +798,7 @@ counter {
timer@6 {
compatible = "st,stm32h7-timer-trigger";
- reg = <6>;
+ reg = <0x6>;
status = "disabled";
};
};
@@ -826,9 +826,9 @@ pwm {
status = "disabled";
};
- timer@11 {
+ timer@b {
compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
+ reg = <0xb>;
status = "disabled";
};
};
@@ -856,9 +856,9 @@ pwm {
status = "disabled";
};
- timer@12 {
+ timer@c {
compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
+ reg = <0xc>;
status = "disabled";
};
};
@@ -886,9 +886,9 @@ pwm {
status = "disabled";
};
- timer@13 {
+ timer@d {
compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
+ reg = <0xd>;
status = "disabled";
};
};
@@ -913,7 +913,7 @@ pwm {
trigger@0 {
compatible = "st,stm32-lptimer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
@@ -1216,7 +1216,7 @@ pwm {
timer@0 {
compatible = "st,stm32h7-timer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
@@ -1258,7 +1258,7 @@ pwm {
timer@7 {
compatible = "st,stm32h7-timer-trigger";
- reg = <7>;
+ reg = <0x7>;
status = "disabled";
};
@@ -1351,9 +1351,9 @@ pwm {
status = "disabled";
};
- timer@14 {
+ timer@e {
compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
+ reg = <0xe>;
status = "disabled";
};
};
@@ -1384,9 +1384,9 @@ pwm {
status = "disabled";
};
- timer@15 {
+ timer@f {
compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
+ reg = <0xf>;
status = "disabled";
};
};
@@ -1417,9 +1417,9 @@ pwm {
status = "disabled";
};
- timer@16 {
+ timer@10 {
compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
+ reg = <0x10>;
status = "disabled";
};
};
@@ -1775,7 +1775,7 @@ pwm {
trigger@1 {
compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
@@ -1805,7 +1805,7 @@ pwm {
trigger@2 {
compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index c0e274eebf13..beba90ab1a2a 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -411,7 +411,7 @@ pwm {
pinctrl-names = "default", "sleep";
status = "okay";
};
- timer@11 {
+ timer@b {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
index 2531f4bc8ca4..d7eeedbc6600 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -1058,7 +1058,7 @@ pwm17_4: pwm {
status = "okay";
};
- timer@16 {
+ timer@10 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 1a07ae09afb2..816669169474 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -747,7 +747,7 @@ pwm {
pinctrl-names = "default", "sleep";
status = "okay";
};
- timer@11 {
+ timer@b {
status = "okay";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/4] ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay
2026-11-09 16:25 [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 1/4] ARM: dts: stm32: Use hex timer addresses on stm32mp13 Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 2/4] ARM: dts: stm32: Use hex timer addresses on stm32mp15 Fabrice Gasnier
@ 2026-11-09 16:25 ` Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 4/4] arm64: dts: stm32: Use hex timer addresses on stm32mp251 Fabrice Gasnier
3 siblings, 0 replies; 5+ messages in thread
From: Fabrice Gasnier @ 2026-11-09 16:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Christoph Niedermaier, Marek Vasut,
Goran Rađenović,
Börge Strümpfel
Cc: devicetree, linux-stm32, linux-arm-kernel, linux-kernel, kernel,
Fabrice Gasnier
Use hexadecimal format for reg property. This has been raised since
("dt-bindings: Use hex unit address patterns"). The SoC dtsi file has
been updated to adopt hex for unit addresses and reg properties. So
update reg property in stm32mp15xx-dhcom-overlay too.
Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi
index 41229ec680cc..e9a58a8ea61e 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi
@@ -56,7 +56,7 @@ pwm2: pwm {
};
timer@1 {
- reg = <1>;
+ reg = <0x1>;
status = "okay";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 4/4] arm64: dts: stm32: Use hex timer addresses on stm32mp251
2026-11-09 16:25 [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers Fabrice Gasnier
` (2 preceding siblings ...)
2026-11-09 16:25 ` [PATCH 3/4] ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay Fabrice Gasnier
@ 2026-11-09 16:25 ` Fabrice Gasnier
3 siblings, 0 replies; 5+ messages in thread
From: Fabrice Gasnier @ 2026-11-09 16:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Christoph Niedermaier, Marek Vasut,
Goran Rađenović,
Börge Strümpfel
Cc: devicetree, linux-stm32, linux-arm-kernel, linux-kernel, kernel,
Fabrice Gasnier
Use hexadecimal unit addresses for timer subnodes. This has been raised
since ("dt-bindings: Use hex unit address patterns").
Also:
- adopt hexadecimal format for reg properties.
- update stm32mp257f-ev1 board accordingly as it uses timer 12.
Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp251.dtsi | 60 +++++++++++++++---------------
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 2 +-
2 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index dac3d2d23ff0..343160bae0b5 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -332,7 +332,7 @@ pwm {
timer@1 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
};
@@ -363,7 +363,7 @@ pwm {
timer@2 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
};
@@ -394,7 +394,7 @@ pwm {
timer@3 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <3>;
+ reg = <0x3>;
status = "disabled";
};
};
@@ -425,7 +425,7 @@ pwm {
timer@4 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <4>;
+ reg = <0x4>;
status = "disabled";
};
};
@@ -450,7 +450,7 @@ counter {
timer@5 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <5>;
+ reg = <0x5>;
status = "disabled";
};
};
@@ -475,7 +475,7 @@ counter {
timer@6 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <6>;
+ reg = <0x6>;
status = "disabled";
};
};
@@ -504,9 +504,9 @@ pwm {
status = "disabled";
};
- timer@11 {
+ timer@b {
compatible = "st,stm32mp25-timer-trigger";
- reg = <11>;
+ reg = <0xb>;
status = "disabled";
};
};
@@ -535,9 +535,9 @@ pwm {
status = "disabled";
};
- timer@12 {
+ timer@c {
compatible = "st,stm32mp25-timer-trigger";
- reg = <12>;
+ reg = <0xc>;
status = "disabled";
};
};
@@ -566,9 +566,9 @@ pwm {
status = "disabled";
};
- timer@13 {
+ timer@d {
compatible = "st,stm32mp25-timer-trigger";
- reg = <13>;
+ reg = <0xd>;
status = "disabled";
};
};
@@ -604,7 +604,7 @@ timer {
trigger@0 {
compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
};
@@ -640,7 +640,7 @@ timer {
trigger@1 {
compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
- reg = <1>;
+ reg = <0x1>;
status = "disabled";
};
};
@@ -928,7 +928,7 @@ pwm {
timer@9 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <9>;
+ reg = <0x9>;
status = "disabled";
};
};
@@ -957,9 +957,9 @@ pwm {
status = "disabled";
};
- timer@10 {
+ timer@a {
compatible = "st,stm32mp25-timer-trigger";
- reg = <10>;
+ reg = <0xa>;
status = "disabled";
};
};
@@ -993,7 +993,7 @@ pwm {
timer@0 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <0>;
+ reg = <0x0>;
status = "disabled";
};
};
@@ -1027,7 +1027,7 @@ pwm {
timer@7 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <7>;
+ reg = <0x7>;
status = "disabled";
};
};
@@ -1115,9 +1115,9 @@ pwm {
status = "disabled";
};
- timer@14 {
+ timer@e {
compatible = "st,stm32mp25-timer-trigger";
- reg = <14>;
+ reg = <0xe>;
status = "disabled";
};
};
@@ -1146,9 +1146,9 @@ pwm {
status = "disabled";
};
- timer@15 {
+ timer@f {
compatible = "st,stm32mp25-timer-trigger";
- reg = <15>;
+ reg = <0xf>;
status = "disabled";
};
};
@@ -1177,9 +1177,9 @@ pwm {
status = "disabled";
};
- timer@16 {
+ timer@10 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <16>;
+ reg = <0x10>;
status = "disabled";
};
};
@@ -1341,9 +1341,9 @@ pwm {
status = "disabled";
};
- timer@19 {
+ timer@13 {
compatible = "st,stm32mp25-timer-trigger";
- reg = <19>;
+ reg = <0x13>;
status = "disabled";
};
};
@@ -1539,7 +1539,7 @@ timer {
trigger@2 {
compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
- reg = <2>;
+ reg = <0x2>;
status = "disabled";
};
};
@@ -1574,7 +1574,7 @@ timer {
trigger@3 {
compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
- reg = <3>;
+ reg = <0x3>;
status = "disabled";
};
};
@@ -1609,7 +1609,7 @@ timer {
trigger@4 {
compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
- reg = <4>;
+ reg = <0x4>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 782b4bb843ee..7f4f39a423ae 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -498,7 +498,7 @@ pwm {
pinctrl-names = "default", "sleep";
status = "okay";
};
- timer@11 {
+ timer@b {
status = "okay";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-11-09 16:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-09 16:25 [PATCH 0/4] ARM: dts: stm32: adopt hex format for timers Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 1/4] ARM: dts: stm32: Use hex timer addresses on stm32mp13 Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 2/4] ARM: dts: stm32: Use hex timer addresses on stm32mp15 Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 3/4] ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay Fabrice Gasnier
2026-11-09 16:25 ` [PATCH 4/4] arm64: dts: stm32: Use hex timer addresses on stm32mp251 Fabrice Gasnier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®