[PATCH] iio: light: opt4060: fix inverted own trigger check

[PATCH] iio: light: opt4060: fix inverted own trigger check

[Jonathan Cameron]

From: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

opt4060_set_driver_state() is meant to keep sampling and the interrupt
on every conversion enabled while the buffer is in use with the
driver's own trigger, as that interrupt is what fires the trigger.

When converted to use IIO_DEV_GUARD_CURRENT_MODE() the negation of
iio_trigger_validate_own_device(), which returns 0 for the device's own
trigger, was lost. As a result, with the driver's own trigger in use,
enabling or disabling a threshold event switches the interrupt to
thresholds only and buffered capture stops. With another trigger in
use, the one shot conversions requested by opt4060_trigger_new_samples()
are instead forced to continuous mode.

Restore the negation so the code matches the comment above it.

Fixes: 8284a4985416 ("iio: light: opt4060: Use IIO cleanup helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
---
This was found by an LLM whilst doing a refactor of related code.
Indeed seems there was a change of behavior in the sited patch that
wasn't as intended.
---
 drivers/iio/light/opt4060.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/light/opt4060.c b/drivers/iio/light/opt4060.c
index 8253a6a8bee4..1a7d429453be 100644
--- a/drivers/iio/light/opt4060.c
+++ b/drivers/iio/light/opt4060.c
@@ -310,7 +310,7 @@ static int opt4060_set_driver_state(struct iio_dev *indio_dev,
 	 * IRQ and sampling must go to or remain continuous.
 	 */
 	if (iio_buffer_enabled(indio_dev) &&
-	    iio_trigger_validate_own_device(indio_dev->trig, indio_dev))
+	    !iio_trigger_validate_own_device(indio_dev->trig, indio_dev))
 		return opt4060_set_state_common(chip, true, true);
 
 	/*
-- 
2.56.0