[PATCH] iio: light: st_uvis25: notify the current trigger when done

[PATCH] iio: light: st_uvis25: notify the current trigger when done

[Jonathan Cameron]

From: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

The trigger handler calls iio_trigger_notify_done() on the driver's own
trigger rather than on the trigger that is currently in use by the
device. The driver does not restrict which trigger may be used, so if
another trigger, for example an hrtimer trigger, is selected then that
trigger's use_count is never decremented and it stops firing after the
first sample. The driver's own trigger use_count also underflows,
preventing it from firing later.

Use iio_dev->trig instead.

Fixes: 3025c8688c1e ("iio: light: add support for UVIS25 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
---
Another LLM found one as part of refactoring how all the code around
triggers works.  Definitely the wrong trigger. There are lots
that access the right trigger via the wrong path (shortly to be
cleaned up), this one manages to get the wrong one in many cases!
---
 drivers/iio/light/st_uvis25_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c
index 94d5261b2663..5c63a68948d6 100644
--- a/drivers/iio/light/st_uvis25_core.c
+++ b/drivers/iio/light/st_uvis25_core.c
@@ -248,7 +248,7 @@ static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p)
 				    iio_get_time_ns(iio_dev));
 
 out:
-	iio_trigger_notify_done(hw->trig);
+	iio_trigger_notify_done(iio_dev->trig);
 
 	return IRQ_HANDLED;
 }
-- 
2.56.0