From: "Paul E. McKenney" <paulmck@kernel.org>
To: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel-team@meta.com,
rostedt@goodmis.org, "Paul E. McKenney" <paulmck@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH 1/8] rcutorture: Enable RCU_BOOST where supported
Date: Mon, 9 Nov 2026 14:19:32 -0800 [thread overview]
Message-ID: <20261109221939.2070171-1-paulmck@kernel.org> (raw)
In-Reply-To: <db8c185c-5523-48e5-abee-020503b4875f@paulmck-laptop>
Currently, RCU_BOOST depends on RCU_EXPERT, and is therefore often
disabled in stress-test such as those run by syzbot. This means that if
syzbot runs a test that overloads CPUs on kernels built with PREEMPT_RCU,
RCU CPU stall warnings are not unexpected. What happens is that a
low-priority task in an RCU read-side critical section is preempted,
cannot be priority boosted, and stays that way for more than 21 seconds.
This commit therefore drops RCU_EXPERT from the RCU_BOOST "depends on"
line and removes the prompt, thus directly driving RCU_BOOST from the
kernel configuration so as to enable it anywhere it is supported and
might help.
This commit is also marked experimental because neither Ubuntu, Fedora,
nor CentOS enable RCU_BOOST. This suggests less testing of RCU priority
boosting than one might wish.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Closes: https://lore.kernel.org/all/20260805122952.6ae38af69a0457779cb44359@linux-foundation.org/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
kernel/rcu/Kconfig | 10 ++++------
tools/testing/selftests/rcutorture/configs/rcu/NOCB01 | 1 -
tools/testing/selftests/rcutorture/configs/rcu/NOCB02 | 1 -
tools/testing/selftests/rcutorture/configs/rcu/TREE01 | 1 -
tools/testing/selftests/rcutorture/configs/rcu/TREE02 | 1 -
tools/testing/selftests/rcutorture/configs/rcu/TREE08 | 1 -
.../testing/selftests/rcutorture/configs/rcuscale/TINY | 1 -
.../selftests/rcutorture/configs/rcuscale/TRACE01 | 1 -
.../testing/selftests/rcutorture/configs/rcuscale/TREE | 1 -
.../selftests/rcutorture/configs/rcuscale/TREE54 | 1 -
.../selftests/rcutorture/configs/refscale/NOPREEMPT | 1 -
.../selftests/rcutorture/configs/refscale/PREEMPT | 1 -
.../testing/selftests/rcutorture/configs/refscale/TINY | 1 -
13 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index bc9483c0b5d84..7b605fa1f576e 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -237,17 +237,15 @@ config RCU_FANOUT_LEAF
Take the default if unsure.
config RCU_BOOST
- bool "Enable RCU priority boosting"
- depends on (RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT) || PREEMPT_RT
- default y if PREEMPT_RT
+ bool
+ default y if (RT_MUTEXES && PREEMPT_RCU) || PREEMPT_RT
help
This option boosts the priority of preempted RCU readers that
block the current preemptible RCU grace period for too long.
This option also prevents heavy loads from blocking RCU
- callback invocation.
+ callback invocation. It is now automatically enabled in
+ any kernel that can benefit from it and that can support it.
- Say Y here if you are working with real-time apps or heavy loads
- Say N here if you are unsure.
config RCU_BOOST_DELAY
int "Milliseconds to delay boosting after RCU grace-period start"
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/NOCB01 b/tools/testing/selftests/rcutorture/configs/rcu/NOCB01
index bbe6d28210ab5..91ca7e8b5725f 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/NOCB01
+++ b/tools/testing/selftests/rcutorture/configs/rcu/NOCB01
@@ -14,7 +14,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_EQS_DEBUG=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/NOCB02 b/tools/testing/selftests/rcutorture/configs/rcu/NOCB02
index 4c2b8cd6d8fdb..ed3f3f7b29e73 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/NOCB02
+++ b/tools/testing/selftests/rcutorture/configs/rcu/NOCB02
@@ -14,7 +14,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_EQS_DEBUG=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE01 b/tools/testing/selftests/rcutorture/configs/rcu/TREE01
index 54b1600c7eb5f..be5bf69a1b60f 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE01
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE01
@@ -10,6 +10,5 @@ CONFIG_RCU_TRACE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/tools/testing/selftests/rcutorture/configs/rcu/TREE02
index 2871ee599891d..36b9228ae7032 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02
@@ -13,7 +13,6 @@ CONFIG_RCU_FANOUT_LEAF=3
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_RCU_EXPERT=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/tools/testing/selftests/rcutorture/configs/rcu/TREE08
index 8b561355b9ef2..ad7d7f873e1eb 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08
@@ -13,7 +13,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_EQS_DEBUG=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcuscale/TINY b/tools/testing/selftests/rcutorture/configs/rcuscale/TINY
index c1a7d38823fba..f611b69f11895 100644
--- a/tools/testing/selftests/rcutorture/configs/rcuscale/TINY
+++ b/tools/testing/selftests/rcutorture/configs/rcuscale/TINY
@@ -11,7 +11,6 @@ CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_TRACE=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcuscale/TRACE01 b/tools/testing/selftests/rcutorture/configs/rcuscale/TRACE01
index f3f1368b83869..69f5764159df0 100644
--- a/tools/testing/selftests/rcutorture/configs/rcuscale/TRACE01
+++ b/tools/testing/selftests/rcutorture/configs/rcuscale/TRACE01
@@ -11,7 +11,6 @@ CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_TRACE=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcuscale/TREE b/tools/testing/selftests/rcutorture/configs/rcuscale/TREE
index b10706fd03a45..5122cf08d5db2 100644
--- a/tools/testing/selftests/rcutorture/configs/rcuscale/TREE
+++ b/tools/testing/selftests/rcutorture/configs/rcuscale/TREE
@@ -12,7 +12,6 @@ CONFIG_HIBERNATION=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_TRACE=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcuscale/TREE54 b/tools/testing/selftests/rcutorture/configs/rcuscale/TREE54
index 9f83e53727969..08d30edb3b99c 100644
--- a/tools/testing/selftests/rcutorture/configs/rcuscale/TREE54
+++ b/tools/testing/selftests/rcutorture/configs/rcuscale/TREE54
@@ -15,7 +15,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_RCU_TRACE=y
diff --git a/tools/testing/selftests/rcutorture/configs/refscale/NOPREEMPT b/tools/testing/selftests/rcutorture/configs/refscale/NOPREEMPT
index 1f215e17cbae2..3e7d7793acc73 100644
--- a/tools/testing/selftests/rcutorture/configs/refscale/NOPREEMPT
+++ b/tools/testing/selftests/rcutorture/configs/refscale/NOPREEMPT
@@ -14,7 +14,6 @@ CONFIG_HIBERNATION=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_KPROBES=n
diff --git a/tools/testing/selftests/rcutorture/configs/refscale/PREEMPT b/tools/testing/selftests/rcutorture/configs/refscale/PREEMPT
index 52e3ef6740567..feed29cf043f6 100644
--- a/tools/testing/selftests/rcutorture/configs/refscale/PREEMPT
+++ b/tools/testing/selftests/rcutorture/configs/refscale/PREEMPT
@@ -12,6 +12,5 @@ CONFIG_HIBERNATION=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/refscale/TINY b/tools/testing/selftests/rcutorture/configs/refscale/TINY
index 9a11b578ff344..b67ea7a9128b1 100644
--- a/tools/testing/selftests/rcutorture/configs/refscale/TINY
+++ b/tools/testing/selftests/rcutorture/configs/refscale/TINY
@@ -14,7 +14,6 @@ CONFIG_HIBERNATION=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_PROVE_LOCKING=n
-CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_EXPERT=y
CONFIG_KPROBES=n
--
2.40.1
next prev parent reply other threads:[~2026-11-09 22:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 22:19 [PATCH 0/8] Miscellaneous RCU updates for v7.5 Paul E. McKenney
2026-11-09 22:19 ` Paul E. McKenney [this message]
2026-11-09 22:19 ` [PATCH 2/8] rcutorture: Disable RCU priority boost testing on non-TREE03 scenarios Paul E. McKenney
2026-11-09 22:19 ` [PATCH 3/8] Documentation/litmus-tests: Add SRCU fastpath anchor-before-scan test Paul E. McKenney
2026-11-09 22:19 ` [PATCH 4/8] Documentation/litmus-tests: Add SRCU fastpath scan-before-anchor test Paul E. McKenney
2026-11-09 22:19 ` [PATCH 5/8] rcuscale: Add srcua scale type Paul E. McKenney
2026-11-09 22:19 ` [PATCH 6/8] rcuscale: Consolidate per-writer arrays into struct writer_state Paul E. McKenney
2026-11-09 22:19 ` [PATCH 7/8] rcu: Print CPU that preempted stalled reader wants to run on Paul E. McKenney
2026-11-09 22:19 ` [PATCH 8/8] doc: Document additional RCU task-stall dump information Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261109221939.2070171-1-paulmck@kernel.org \
--to=paulmck@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=kernel-team@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®