From: Jason Yang <jason98166@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Guochun Huang <hero.huang@rock-chips.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Michael Riesch <michael.riesch@collabora.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org, Jason Yang <jason98166@gmail.com>
Subject: [PATCH v6 7/9] phy: rockchip-samsung-dcphy: Support the new phy-type and direction binding
Date: Tue, 10 Nov 2026 16:18:10 +0800 [thread overview]
Message-ID: <20261110-dcphy-rx-v1-v6-7-d681ba20b36a@gmail.com> (raw)
In-Reply-To: <20261110-dcphy-rx-v1-v6-0-d681ba20b36a@gmail.com>
The binding now selects the PHY with the cell and the mode of the block
with the phy-type property of the provider. Read phy-type in probe,
D-PHY by default.
of_xlate() returns the transmitter for PHY_DIRECTION_TX. The deprecated
PHY_TYPE_DPHY and PHY_TYPE_CPHY select the transmitter as today, so
existing DTs are unaffected.
A phy-type other than D-PHY or C-PHY fails probe. A deprecated cell
value that does not match phy-type gets a warning, and the transmitter
then refuses to power on, as in C-PHY mode today.
Signed-off-by: Jason Yang <jason98166@gmail.com>
---
drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 32 ++++++++++++++++++-----
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
index c40c84791eca..e8e229fc4856 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
@@ -297,6 +297,7 @@ struct samsung_mipi_dcphy {
struct reset_control *grf_apb_rst;
struct samsung_mipi_phy tx;
u8 type;
+ bool legacy_mismatch;
const struct samsung_mipi_dcphy_plat_data *pdata;
struct {
@@ -1376,6 +1377,9 @@ static int samsung_mipi_dcphy_tx_power_on(struct phy *phy)
{
struct samsung_mipi_dcphy *samsung = phy_get_drvdata(phy);
+ if (samsung->legacy_mismatch)
+ return -EOPNOTSUPP;
+
switch (samsung->type) {
case PHY_TYPE_DPHY:
return samsung_mipi_dphy_tx_power_on(samsung);
@@ -1549,13 +1553,21 @@ static struct phy *samsung_mipi_dcphy_xlate(struct device *dev,
return ERR_PTR(-EINVAL);
}
- if (samsung->type != PHY_NONE && samsung->type != args->args[0])
- dev_warn(dev, "phy type select %d overwriting type %d\n",
- args->args[0], samsung->type);
-
- samsung->type = args->args[0];
-
- return samsung->tx.phy;
+ switch (args->args[0]) {
+ case PHY_DIRECTION_TX:
+ return samsung->tx.phy;
+ case PHY_TYPE_DPHY:
+ case PHY_TYPE_CPHY:
+ if (args->args[0] != samsung->type) {
+ dev_warn(dev, "unsupported phy cell %u with phy-type %u\n",
+ args->args[0], samsung->type);
+ samsung->legacy_mismatch = true;
+ }
+ return samsung->tx.phy;
+ default:
+ dev_err(dev, "invalid phy cell %u\n", args->args[0]);
+ return ERR_PTR(-EINVAL);
+ }
}
static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
@@ -1566,6 +1578,7 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
struct phy_provider *phy_provider;
struct resource *res;
void __iomem *regs;
+ u32 type = PHY_TYPE_DPHY;
int ret;
samsung = devm_kzalloc(dev, sizeof(*samsung), GFP_KERNEL);
@@ -1620,6 +1633,11 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(samsung->grf_apb_rst),
"Failed to get system grf_apb_rst control\n");
+ of_property_read_u32(np, "phy-type", &type);
+ if (type != PHY_TYPE_DPHY && type != PHY_TYPE_CPHY)
+ return dev_err_probe(dev, -EINVAL, "unsupported phy-type %u\n", type);
+ samsung->type = type;
+
ret = devm_pm_runtime_enable(dev);
if (ret)
return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
--
2.43.0
next prev parent reply other threads:[~2026-11-10 8:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 8:18 [PATCH v6 0/9] phy: rockchip-samsung-dcphy: Add the MIPI D-PHY receiver Jason Yang
2026-11-10 8:18 ` [PATCH v6 1/9] dt-bindings: phy: Add PHY_DIRECTION_TX/RX definitions Jason Yang
2026-11-10 8:18 ` [PATCH v6 2/9] dt-bindings: phy: rockchip,rk3588-mipi-dcphy: Select TX or RX, add phy-type Jason Yang
2026-11-10 8:18 ` [PATCH v6 3/9] phy: rockchip-samsung-dcphy: Unwind power-on on PLL lock failure Jason Yang
2026-11-10 8:18 ` [PATCH v6 4/9] phy: rockchip-samsung-dcphy: Always write the rate-dependent registers Jason Yang
2026-11-10 8:18 ` [PATCH v6 5/9] phy: rockchip-samsung-dcphy: Move block-level setup to runtime resume Jason Yang
2026-11-10 8:18 ` [PATCH v6 6/9] phy: rockchip-samsung-dcphy: Name the transmitter helpers and ops Jason Yang
2026-11-10 8:18 ` Jason Yang [this message]
2026-11-10 8:18 ` [PATCH v6 8/9] phy: rockchip-samsung-dcphy: Add MIPI D-PHY receiver support Jason Yang
2026-11-10 8:18 ` [PATCH v6 9/9] arm64: dts: rockchip: add the dcphy mipi csi-2 receiver nodes to rk3588 Jason Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110-dcphy-rx-v1-v6-7-d681ba20b36a@gmail.com \
--to=jason98166@gmail.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=hero.huang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mani@kernel.org \
--cc=michael.riesch@collabora.com \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®