[PATCH 0/9] arm64: dts: marvell: DT warning fixes

[PATCH 0/9] arm64: dts: marvell: DT warning fixes

[Rob Herring (Arm)]

Another batch of DT schema warning fixes for Marvell platforms. This
fixes most of the remaining warnings on Marvell platforms.

It's best if the whole series is taken together.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
Rob Herring (Arm) (9):
      dt-bindings: mfd: Add Marvell AP806/CP110 system controller schema
      arm64: dts: marvell: Add AP806/CP110 syscon compatibles
      arm64: dts: marvell: Drop unused USB connector PHY supplies
      arm64: dts: marvell: Drop SPI max frequency
      arm64: dts: marvell: Fix node names
      arm64: dts: marvell: Fix w25q32 compatible strings
      arm64: dts: marvell: Drop unused USB 'phy-names'
      arm64: dts: marvell: cn9131-cf-solidwan: Drop st,m41t80 reset-gpios
      arm64: dts: marvell: armada-3720-gl-mv1000: Add switch fixed-link

 .../mfd/marvell,ap806-cp110-system-controller.yaml | 59 ++++++++++++++++++++++
 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi      |  2 +-
 .../boot/dts/marvell/armada-3720-gl-mv1000.dts     |  6 +++
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |  1 -
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     |  2 -
 .../dts/marvell/armada-8040-clearfog-gt-8k.dts     |  5 +-
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     |  1 -
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi |  3 +-
 .../boot/dts/marvell/armada-8040-puzzle-m801.dts   | 11 ++--
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi      |  6 ++-
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi      |  6 ++-
 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts       |  2 -
 arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi     |  2 -
 arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts |  1 -
 .../boot/dts/marvell/cn9131-db-comexpress.dtsi     |  4 +-
 15 files changed, 84 insertions(+), 27 deletions(-)
---
base-commit: aaa2f954c21b205a0bcd0961e5b2be4e82e58455
change-id: 20261111-dtbs-marvell-3ae21c8ac47d

Best regards,
--  
Rob Herring (Arm) <robh@kernel.org>

[PATCH 1/9] dt-bindings: mfd: Add Marvell AP806/CP110 system controller schema

[Rob Herring (Arm)]

The Marvell AP806 and CP110 lack specific compatibles. Add a dedicated
schema for the Marvell AP806 and CP110 system controllers and their
child devices.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../mfd/marvell,ap806-cp110-system-controller.yaml | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/marvell,ap806-cp110-system-controller.yaml b/Documentation/devicetree/bindings/mfd/marvell,ap806-cp110-system-controller.yaml
new file mode 100644
index 000000000000..4c43986c2c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/marvell,ap806-cp110-system-controller.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/marvell,ap806-cp110-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell AP806 and CP110 system controller
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - marvell,ap806-system-controller
+          - marvell,cp110-system-controller
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  clock:
+    oneOf:
+      - $ref: /schemas/clock/marvell,ap80x-clock.yaml#
+      - $ref: /schemas/clock/marvell,cp110-clock.yaml#
+
+  pinctrl:
+    oneOf:
+      - $ref: /schemas/pinctrl/marvell,ap806-pinctrl.yaml#
+      - $ref: /schemas/pinctrl/marvell,armada-7k-pinctrl.yaml#
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    $ref: /schemas/gpio/gpio-mvebu.yaml#
+
+  "^clock-cpu(@[0-9a-f]+)?$":
+    $ref: /schemas/clock/marvell,ap80x-clock.yaml#
+
+  "^thermal-sensor@[0-9a-f]+$":
+    $ref: /schemas/thermal/marvell,armada-ap806-thermal.yaml#
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: syscon-common.yaml#
+
+unevaluatedProperties: false

-- 
2.53.0

[PATCH 2/9] arm64: dts: marvell: Add AP806/CP110 syscon compatibles

[Rob Herring (Arm)]

Add specific compatibles for the AP806 and CP110 system-controller
syscon blocks that host pinctrl, GPIO, clock and thermal child nodes.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 6 ++++--
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 40e146982921..0da13b2cd1fc 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -267,7 +267,8 @@ ap_sdhci0: mmc@6e0000 {
 			};
 
 			ap_syscon0: system-controller@6f4000 {
-				compatible = "syscon", "simple-mfd";
+				compatible = "marvell,ap806-system-controller",
+					     "syscon", "simple-mfd";
 				reg = <0x6f4000 0x2000>;
 
 				ap_pinctrl: pinctrl {
@@ -293,7 +294,8 @@ ap_gpio: gpio@1040 {
 			};
 
 			ap_syscon1: system-controller@6f8000 {
-				compatible = "syscon", "simple-mfd";
+				compatible = "marvell,ap806-system-controller",
+					     "syscon", "simple-mfd";
 				reg = <0x6f8000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 39599171d51b..9e365af19a0c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -225,7 +225,8 @@ CP11X_LABEL(rtc): rtc@284000 {
 		};
 
 		CP11X_LABEL(syscon0): system-controller@440000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "marvell,cp110-system-controller",
+				     "syscon", "simple-mfd";
 			reg = <0x440000 0x2000>;
 
 			CP11X_LABEL(clk): clock {
@@ -277,7 +278,8 @@ CP11X_LABEL(gpio2): gpio@140 {
 		};
 
 		CP11X_LABEL(syscon1): system-controller@400000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "marvell,cp110-system-controller",
+				     "syscon", "simple-mfd";
 			reg = <0x400000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;

-- 
2.53.0

[PATCH 3/9] arm64: dts: marvell: Drop unused USB connector PHY supplies

[Rob Herring (Arm)]

'phy-supply' is not a documented USB connector property. The generic PHY
framework only retrieves phy-supply from a PHY provider node. These
connector-child properties have no consumer, so remove them.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts     | 1 -
 arch/arm64/boot/dts/marvell/armada-7040-db.dts             | 2 --
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 1 -
 arch/arm64/boot/dts/marvell/armada-8040-db.dts             | 1 -
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi         | 1 -
 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts    | 1 -
 6 files changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index bd00e7df87c6..1ef4689d5f18 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -284,7 +284,6 @@ &usb2 {
 &comphy2 {
 	connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&exp_usb3_vbus>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 3add6506ff20..f5a53fad66e6 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -224,7 +224,6 @@ &cp0_utmi {
 &cp0_comphy1 {
 	cp0_usbh0_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&cp0_reg_usb3_0_vbus>;
 	};
 };
 
@@ -238,7 +237,6 @@ &cp0_usb3_0 {
 &cp0_comphy4 {
 	cp0_usbh1_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&cp0_reg_usb3_1_vbus>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 90ae93274a16..4efa2a1dbda7 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -599,7 +599,6 @@ flash@0 {
 &cp1_comphy2 {
 	cp1_usbh0_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&v_5v0_usb3_hst_vbus>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index c7102f74d4d5..89e6f35f310d 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -170,7 +170,6 @@ &cp0_usb3_0 {
 &cp0_comphy4 {
 	cp0_usbh1_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&cp0_reg_usb3_1_vbus>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index f2d278d171eb..006293931c78 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -370,7 +370,6 @@ flash@0 {
 &cp1_comphy2 {
 	cp1_usbh0_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&v_5v0_usb3_hst_vbus>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index def25d51c4bf..06a861f83ad8 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -491,7 +491,6 @@ &cp1_uart0 {
 &cp1_comphy2 {
 	cp1_usbh0_con: connector {
 		compatible = "usb-a-connector";
-		phy-supply = <&v_5v0_usb3_hst_vbus>;
 	};
 };
 

-- 
2.53.0

[PATCH 4/9] arm64: dts: marvell: Drop SPI max frequency

[Rob Herring (Arm)]

Remove spi-max-frequency from the CP0 SPI controller node on the
CN9130 SolidRun SOM. The property belongs on SPI devices, and the
flash child already has its own maximum frequency. Plus, pretty
sure 1.8GHz is not a possible SPI bus frequency.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
index f95202decfce..7200f72b934f 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -106,8 +106,6 @@ &cp0_spi1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_spi1_pins>;
-	/* max speed limited by a mux */
-	spi-max-frequency = <1800000000>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";

-- 
2.53.0

[PATCH 5/9] arm64: dts: marvell: Fix node names

[Rob Herring (Arm)]

Fix various node names to use standard names.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi              |  2 +-
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts |  2 +-
 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts    | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 4878773883c9..814b8a2e8ea9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -231,7 +231,7 @@ sdhci: mmc@805c0000 {
 		 * Dedicated section for devices behind 32bit controllers so we
 		 * can configure specific DMA mapping for them
 		 */
-		behind-32bit-controller@7f000000 {
+		dma-bus@0 {
 			compatible = "simple-bus";
 			#address-cells = <0x2>;
 			#size-cells = <0x2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4efa2a1dbda7..101d1518e28f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -324,7 +324,7 @@ cp0_led1_pins: led1-pins {
 		marvell,function = "gpio";
 	};
 
-	cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+	cp0_copper_eth_phy_reset: copper-eth-phy-reset-pins {
 		marvell,pins = "mpp43";
 		marvell,function = "gpio";
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 06a861f83ad8..68c8489e0a6f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -165,7 +165,7 @@ cpu_active: cpu-active {
 		};
 	};
 	cooling-maps {
-		fan-map {
+		map-fan {
 			trip = <&cpu_active>;
 			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
 					<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
@@ -191,19 +191,19 @@ flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
-		partition@u-boot {
+		partition@0 {
 			label = "u-boot";
 			reg = <0x00000000 0x001f0000>;
 		};
-		partition@u-boot-env {
+		partition@1f0000 {
 			label = "u-boot-env";
 			reg = <0x001f0000 0x00010000>;
 		};
-		partition@ubi1 {
+		partition@200000 {
 			label = "ubi1";
 			reg = <0x00200000 0x03f00000>;
 		};
-		partition@ubi2 {
+		partition@4100000 {
 			label = "ubi2";
 			reg = <0x04100000 0x03f00000>;
 		};

-- 
2.53.0

[PATCH 6/9] arm64: dts: marvell: Fix w25q32 compatible strings

[Rob Herring (Arm)]

The w25q32 SPI NOR Flash is a Winbond, not ST, part and is missing the
"jedec,spi-nor" fallback.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 2 +-
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 101d1518e28f..0de09d126104 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -590,7 +590,7 @@ &cp1_spi1 {
 	status = "okay";
 
 	flash@0 {
-		compatible = "st,w25q32";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 006293931c78..067951cd7449 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -361,7 +361,7 @@ &cp1_spi1 {
 	status = "okay";
 
 	flash@0 {
-		compatible = "st,w25q32";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
 	};

-- 
2.53.0

[PATCH 7/9] arm64: dts: marvell: Drop unused USB 'phy-names'

[Rob Herring (Arm)]

'phy-names' is not valid without a corresponding 'phys' property, so
drop them when 'phys' is not present.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts          | 2 --
 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi | 4 ++--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
index a7b6dfba8af5..5823b25e5faf 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
@@ -28,11 +28,9 @@ &cp0_comphy2 0
 &cp0_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy0>;
-	phy-names = "usb";
 };
 
 &cp0_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy1>;
-	phy-names = "usb";
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
index 71c225221617..a68c958fbb30 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -89,15 +89,15 @@ &cp0_spi1 {
 &cp0_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy0>;
-	phy-names = "usb";
 	/delete-property/ phys;
+	/delete-property/ phy-names;
 };
 
 &cp0_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy1>;
-	phy-names = "usb";
 	/delete-property/ phys;
+	/delete-property/ phy-names;
 };
 
 &cp1_usb3_1 {

-- 
2.53.0

[PATCH 8/9] arm64: dts: marvell: cn9131-cf-solidwan: Drop st,m41t80 reset-gpios

[Rob Herring (Arm)]

The part has no reset line nor does the Linux driver handle the property,
so drop it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index b6aeba7d0a61..0b079e1428bf 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -252,7 +252,6 @@ carrier_rtc: rtc@68 {
 		pinctrl-names = "default";
 		interrupt-parent = <&cp1_gpio1>;
 		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&cp1_gpio1 13 GPIO_ACTIVE_LOW>;
 	};
 };
 

-- 
2.53.0

[PATCH 9/9] arm64: dts: marvell: armada-3720-gl-mv1000: Add switch fixed-link

[Rob Herring (Arm)]

As the switch port 0 has an 'ethernet' phandle, 'phy-mode' and one of
'fixed-link', 'phy-handle' or 'managed' are required by the DSA schema.
The expressobin has appears to have a similar configuration, so copy it
and use 'fixed-link'.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index a881a3326dba..93af902f4f6f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -161,6 +161,12 @@ ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			ethernet-port@1 {

-- 
2.53.0