* [PATCH RESEND 1/3] x86/setup: Fix logged allocation range in relocate_initrd()
@ 2026-11-11 16:56 Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 2/3] x86/setup: Simplify copy error handling " Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 3/3] x86/setup: Use pr_info() " Thorsten Blum
0 siblings, 2 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-11 16:56 UTC (permalink / raw)
To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen, x86,
H. Peter Anvin, Mike Rapoport (Microsoft),
Ard Biesheuvel, Pratyush Yadav (Google),
Thomas Zimmermann, Grzegorz Jaszczyk, Breno Leitao,
Harshit Mogalapalli, Thorsten Blum, Johannes Weiner, Yinghai Lu
Cc: Ingo Molnar, linux-kernel
Since commit c967da6a0ba8 ("x86: Make sure free_init_pages() frees pages
on page boundary"), relocate_initrd() allocates area_size bytes, which
is ramdisk_size rounded up to a page boundary. However, the log still
uses the potentially smaller ramdisk_size to calculate the end of the
allocated range and can report it as too short.
Use area_size instead.
Fixes: c967da6a0ba8 ("x86: Make sure free_init_pages() frees pages on page boundary")
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
arch/x86/kernel/setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 19fc8e1714e6..4a6c54110e75 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -334,7 +334,7 @@ static void __init relocate_initrd(void)
initrd_start = relocated_ramdisk + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
- relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);
+ relocated_ramdisk, relocated_ramdisk + area_size - 1);
ret = copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size);
if (ret)
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH RESEND 2/3] x86/setup: Simplify copy error handling in relocate_initrd()
2026-11-11 16:56 [PATCH RESEND 1/3] x86/setup: Fix logged allocation range in relocate_initrd() Thorsten Blum
@ 2026-11-11 16:56 ` Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 3/3] x86/setup: Use pr_info() " Thorsten Blum
1 sibling, 0 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-11 16:56 UTC (permalink / raw)
To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen, x86,
H. Peter Anvin, Mike Rapoport (Microsoft),
Ard Biesheuvel, Thomas Zimmermann, Grzegorz Jaszczyk,
Pratyush Yadav (Google),
Breno Leitao, Harshit Mogalapalli, Thorsten Blum
Cc: Ingo Molnar, linux-kernel
Check the result of copy_from_early_mem() directly and drop the
now-obsolete local ret variable.
No functional change.
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
arch/x86/kernel/setup.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 4a6c54110e75..8f34bd61512e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -322,7 +322,6 @@ static void __init relocate_initrd(void)
u64 ramdisk_image = get_ramdisk_image();
u64 ramdisk_size = get_ramdisk_size();
u64 area_size = PAGE_ALIGN(ramdisk_size);
- int ret = 0;
/* We need to move the initrd down into directly mapped mem */
u64 relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0,
@@ -336,8 +335,7 @@ static void __init relocate_initrd(void)
printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
relocated_ramdisk, relocated_ramdisk + area_size - 1);
- ret = copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size);
- if (ret)
+ if (copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size))
panic("Copy RAMDISK failed\n");
printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH RESEND 3/3] x86/setup: Use pr_info() in relocate_initrd()
2026-11-11 16:56 [PATCH RESEND 1/3] x86/setup: Fix logged allocation range in relocate_initrd() Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 2/3] x86/setup: Simplify copy error handling " Thorsten Blum
@ 2026-11-11 16:56 ` Thorsten Blum
1 sibling, 0 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-11 16:56 UTC (permalink / raw)
To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen, x86,
H. Peter Anvin, Mike Rapoport (Microsoft),
Ard Biesheuvel, Andrew Morton, Grzegorz Jaszczyk,
Thomas Zimmermann, Pratyush Yadav (Google),
Breno Leitao, Harshit Mogalapalli, Thorsten Blum
Cc: Ingo Molnar, linux-kernel
Use pr_info() instead of printk(KERN_INFO) as suggested by checkpatch.
Also change "Move" to "Moved" to match the past tense of "Allocated".
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
arch/x86/kernel/setup.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 8f34bd61512e..91acec0ff252 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -332,14 +332,13 @@ static void __init relocate_initrd(void)
initrd_start = relocated_ramdisk + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
- printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
- relocated_ramdisk, relocated_ramdisk + area_size - 1);
+ pr_info("Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
+ relocated_ramdisk, relocated_ramdisk + area_size - 1);
if (copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size))
panic("Copy RAMDISK failed\n");
- printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
- " [mem %#010llx-%#010llx]\n",
+ pr_info("Moved RAMDISK from [mem %#010llx-%#010llx] to [mem %#010llx-%#010llx]\n",
ramdisk_image, ramdisk_image + ramdisk_size - 1,
relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);
}
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-11 16:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-11 16:56 [PATCH RESEND 1/3] x86/setup: Fix logged allocation range in relocate_initrd() Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 2/3] x86/setup: Simplify copy error handling " Thorsten Blum
2026-11-11 16:56 ` [PATCH RESEND 3/3] x86/setup: Use pr_info() " Thorsten Blum
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®