mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Mohit Dsor <mohit.dsor@oss.qualcomm.com>,
	venkata.valluru@oss.qualcomm.com,
	Vishnu Saini <vishnu.saini@oss.qualcomm.com>,
	Anand Tiwari <anand.tiwari@oss.qualcomm.com>
Subject: [PATCH 0/7] arm64: dts: qcom: lemans-draco-evk: Add display panel overlays
Date: Fri, 13 Nov 2026 16:25:12 +0530	[thread overview]
Message-ID: <20261113-draco-evk-display-v1-0-28a19c6aea87@oss.qualcomm.com> (raw)

The Qualcomm SA8775P/QCS9100 (LeMans) SoC card is mounted on the
Draco EVK carrier card. The DSI0 interface from the SoC card is
routed to either the 22-pin DSI connector on the carrier card named
JDISP1 DSI0 or to the DSI0_B2B connector, through a MUX which can
be selected by a hardware DIP switch. There are multiple daughter
cards designed that can be connected to this B2B connector.

The below B2B display interface is enabled by default in the base DTB:
  - DSI-to-HDMI using the LT9611UXD daughter card

The following overlay DTs are added for additional display
configurations:
  - lemans-draco-evk-dlc0697-dsi: DLC DLC0697 DSI panel with DLC
    daughter card
  - lemans-draco-evk-raspberrypi-dsi-7inch: Raspberry Pi 7-inch DSI
    panel with touch via the 22-pin DSI connector
  - lemans-draco-evk-waveshare-dsi-8inch: Waveshare 8-inch DSI panel
    with touch via the 22-pin DSI connector
  - lemans-draco-evk-lvds-auo,g133han01: AUO G133HAN01 LVDS panel
    with LVDS daughter card

These overlays are applied on top of the lemans-draco-evk base DTB.

Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
---
Anand Tiwari (1):
      arm64: dts: qcom: lemans-draco-evk: Add AUO G133HAN01 LVDS panel overlay

Mohit Dsor (3):
      arm64: dts: qcom: lemans-draco-evk: Add LT9611UXD HDMI bridge support
      arm64: dts: qcom: lemans-draco-evk: Add hdmi-dual-dsi overlay
      arm64: defconfig: Enable PCA9685 PWM controller

Vishnu Saini (3):
      arm64: dts: qcom: lemans-draco-evk: Add DLC DLC0697 DSI panel overlay
      arm64: dts: qcom: lemans-draco-evk: Add RPi 7-inch DSI panel overlay
      arm64: dts: qcom: lemans-draco-evk: Add Waveshare 8-inch DSI panel overlay

 arch/arm64/boot/dts/qcom/Makefile                  |  20 ++++
 .../dts/qcom/lemans-draco-evk-dlc0697-dsi.dtso     |  81 +++++++++++++
 .../dts/qcom/lemans-draco-evk-hdmi-dual-dsi.dtso   |  38 ++++++
 .../qcom/lemans-draco-evk-lvds-auo,g133han01.dtso  | 131 +++++++++++++++++++++
 .../lemans-draco-evk-raspberrypi-dsi-7inch.dtso    |  98 +++++++++++++++
 arch/arm64/boot/dts/qcom/lemans-draco-evk-som.dtsi |   5 +
 .../qcom/lemans-draco-evk-waveshare-dsi-8inch.dtso |  94 +++++++++++++++
 arch/arm64/boot/dts/qcom/lemans-draco-evk.dts      | 119 +++++++++++++++++++
 arch/arm64/configs/defconfig                       |   1 +
 9 files changed, 587 insertions(+)
---
base-commit: d4e72753715bc741a78c4f7e8cf4f182f14f96c0
change-id: 20261110-draco-evk-display-3ad2b1664c4e
prerequisite-message-id: <20261019-lemans-draco-final-changes-bringup-v1-0-dcabe94f1074@oss.qualcomm.com>
prerequisite-patch-id: 642840f2fbb8ad320deef8ce40c94d18cf3b9f70
prerequisite-patch-id: 5b6f00308e9659c1f43974c383aaf93a09e3cc15
prerequisite-patch-id: 00a00addce3621808e6596af67db464db21f8d61
prerequisite-message-id: <20261021-lt9611c-v7-v18-0-4978b94896f1@oss.qualcomm.com>
prerequisite-patch-id: 49f1e01bb5594ce9c4301ce4b16715834ece7f41
prerequisite-patch-id: 21cfbbfd71515961501a768edad476740336c13c

Best regards,
--  
Mohit Dsor <mohit.dsor@oss.qualcomm.com>


             reply	other threads:[~2026-11-13 11:27 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-13 10:55 Mohit Dsor [this message]
2026-11-13 10:55 ` [PATCH 1/7] arm64: dts: qcom: lemans-draco-evk: Add LT9611UXD HDMI bridge support Mohit Dsor
2026-11-13 10:55 ` [PATCH 2/7] arm64: dts: qcom: lemans-draco-evk: Add hdmi-dual-dsi overlay Mohit Dsor
2026-11-13 10:55 ` [PATCH 3/7] arm64: dts: qcom: lemans-draco-evk: Add DLC DLC0697 DSI panel overlay mohit.dsor
2026-11-13 10:55 ` [PATCH 4/7] arm64: defconfig: Enable PCA9685 PWM controller Mohit Dsor
2026-11-13 10:55 ` [PATCH 5/7] arm64: dts: qcom: lemans-draco-evk: Add AUO G133HAN01 LVDS panel overlay mohit.dsor
2026-11-13 10:55 ` [PATCH 6/7] arm64: dts: qcom: lemans-draco-evk: Add RPi 7-inch DSI " mohit.dsor
2026-11-13 10:55 ` [PATCH 7/7] arm64: dts: qcom: lemans-draco-evk: Add Waveshare 8-inch " mohit.dsor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261113-draco-evk-display-v1-0-28a19c6aea87@oss.qualcomm.com \
    --to=mohit.dsor@oss.qualcomm.com \
    --cc=anand.tiwari@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=venkata.valluru@oss.qualcomm.com \
    --cc=vishnu.saini@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®