[PATCH 2/4] arm64: dts: qcom: sdm632-fairphone-fp3: Wire up PMI632 LCDB

[Luca Weiss <luca.weiss@fairphone.com>]

Since Linux has gained LCDB support now, wire up the LCDB regulators so
we can turn them off and on as desired.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 26 ++++++++++++++---------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 3223884f9cd6..77331ae6a692 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -72,14 +72,6 @@ vreg_cam2_dig_1p2: regulator-cam2-dig-1p2 {
 		vin-supply = <&vph_pwr>;
 	};
 
-	/* Dummy regulator until PMI632 has LCDB VSP/VSN support */
-	lcdb_dummy: regulator-lcdb-dummy {
-		compatible = "regulator-fixed";
-		regulator-name = "lcdb_dummy";
-		regulator-min-microvolt = <5500000>;
-		regulator-max-microvolt = <5500000>;
-	};
-
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -175,8 +167,8 @@ panel@0 {
 		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 
 		iovcc-supply = <&pm8953_l6>;
-		vsn-supply = <&lcdb_dummy>;
-		vsp-supply = <&lcdb_dummy>;
+		vsn-supply = <&pmi632_lcdb_ncp>;
+		vsp-supply = <&pmi632_lcdb_ldo>;
 
 		pinctrl-0 = <&mdss_te_default>;
 		pinctrl-names = "default";
@@ -212,6 +204,20 @@ &pm8953_resin {
 	status = "okay";
 };
 
+&pmi632_lcdb {
+	status = "okay";
+};
+
+&pmi632_lcdb_ldo {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+};
+
+&pmi632_lcdb_ncp {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+};
+
 &pmi632_lpg {
 	status = "okay";
 

-- 
2.56.1