mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 0/3] Add support for LeMans Draco EVK board
@ 2026-11-13 11:28 Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Gopikishan Thawre @ 2026-11-13 11:28 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Richard Cochran
  Cc: linux-arm-msm, devicetree, linux-kernel, netdev,
	Gopikishan Thawre, Kishor Buchi, Vishnu Saini,
	Khalid Faisal Ansari, Ajinkya Inchure, Anuj Tripathi

Add device tree support for the LeMans Draco EVK, an evaluation kit
based on the SA8775P/QCS9100 SoC targeting automotive and industrial
use cases. The platform consists of a System on Module (SoM) paired
with the Draco carrier board.

The LeMans Draco SoM integrates the SA8775P/QCS9100 SoC, three
PMM8654AU PMICs, UFS storage, USB 0/1/2, GPU (Adreno 663), and
essential connectivity. A dedicated SoM .dtsi allows carrier board
device trees to reuse common SoM peripherals without duplication.

The Draco carrier board provides board-specific peripherals:
- Four DisplayPort outputs (DP0-DP3) via MDSS0 and MDSS1
- I2C GPIO expanders (TCA6416 x4, PCA9534 x2) and EEPROM-based MAC
  address storage on i2c18
- Dual Ethernet (ethernet0/ethernet1) with HSGMII PHY over SerDes
- ST33HTPM TPM over SPI16
- AMC6821 fan controller on i2c4

Changes in v2:
  - Sort DT node order: move tlmm block after i2c18 node. [Dmitry Baryshkov]
  - Drop unused sub-node labels ethernet0_mdc, ethernet0_mdio,
    ethernet1_mdc and ethernet1_mdio. [Konrad Dybcio]
  - Improve dt-bindings commit message to explain the two-compatible
    SoM/carrier hierarchy. [Krzysztof Kozlowski]

Link: https://lore.kernel.org/r/20261019-lemans-draco-final-changes-bringup-v1-0-dcabe94f1074@oss.qualcomm.com
Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
Gopikishan Thawre (3):
      dt-bindings: arm: qcom: Add LeMans Draco EVK board
      arm64: dts: qcom: lemans: Add LeMans Draco EVK SoM platform
      arm64: dts: qcom: lemans: Add LeMans Draco EVK board

 Documentation/devicetree/bindings/arm/qcom.yaml |   7 +
 arch/arm64/boot/dts/qcom/Makefile               |   5 +
 arch/arm64/boot/dts/qcom/lemans-draco-evk.dts   | 543 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi  | 401 +++++++++++++++++
 4 files changed, 956 insertions(+)
---
base-commit: 6474fa070f2b8013b4b87350b775b8c3be6e8aac
change-id: 20261013-lemans-draco-final-changes-bringup-1b7b76f8b2e3

Best regards,
--  
Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/3] dt-bindings: arm: qcom: Add LeMans Draco EVK board
  2026-11-13 11:28 [PATCH v2 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
@ 2026-11-13 11:28 ` Gopikishan Thawre
  2026-11-16 12:11   ` Krzysztof Kozlowski
  2026-11-13 11:28 ` [PATCH v2 2/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK SoM platform Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 3/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK board Gopikishan Thawre
  2 siblings, 1 reply; 5+ messages in thread
From: Gopikishan Thawre @ 2026-11-13 11:28 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Richard Cochran
  Cc: linux-arm-msm, devicetree, linux-kernel, netdev, Gopikishan Thawre

Add compatible strings for the LeMans Draco EVK, an evaluation board
based on the SA8775P/QCS9100 SoC family.

The platform uses a two-board design: the LeMans Draco SoM carrying
the SA8775P/QCS9100 SoC and core connectivity, paired with the Draco
carrier board providing application-specific peripherals.

Add two compatibles to model this hierarchy:
  - qcom,lemans-draco-som: identifies the SoM layer, allowing the
    SoM device tree to be shared with a common carrier board.
  - qcom,lemans-draco-evk: identifies the complete board (SoM + Draco
    carrier), used in the board DTS.

Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 07ef7988b068..86edf4df2d96 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -503,6 +503,13 @@ properties:
           - const: qcom,qcs9100
           - const: qcom,sa8775p
 
+      - items:
+          - enum:
+              - qcom,lemans-draco-evk
+          - const: qcom,lemans-draco-som
+          - const: qcom,qcs9100
+          - const: qcom,sa8775p
+
       - description: Qualcomm AR2 Gen1 platform
         items:
           - enum:

-- 
2.43.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK SoM platform
  2026-11-13 11:28 [PATCH v2 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
@ 2026-11-13 11:28 ` Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 3/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK board Gopikishan Thawre
  2 siblings, 0 replies; 5+ messages in thread
From: Gopikishan Thawre @ 2026-11-13 11:28 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Richard Cochran
  Cc: linux-arm-msm, devicetree, linux-kernel, netdev,
	Gopikishan Thawre, Kishor Buchi

Introduce the device tree for the SA8775P/QCS9100-based LeMans Draco
EVK SoM. The LeMans Draco SoM is a compact compute module integrating
the SA8775P SoC, three PMM8654AU PMICs, and essential connectivity,
designed to mount on carrier boards.

The initial SoM device tree includes basic support for:

- RPMH regulators for three PMM8654AU PMICs
- QUP firmware paths (qupv3_id_0/1/2)
- Remoteproc instances (ADSP, CDSP0/1, GPDSP0/1) with firmware paths
- Debug UART (uart10) and board clocks
- UFS storage
- USB 0, USB 1 (host mode) and USB 2 with HSPHY and QMP PHY supplies
- GPU (Adreno 663) with ZAP shader firmware
- Video processing unit (iris)

Co-developed-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi | 401 +++++++++++++++++++++++++
 1 file changed, 401 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi b/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi
new file mode 100644
index 000000000000..6b7971bcdc93
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+	status = "okay";
+};
+
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};

-- 
2.43.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 3/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK board
  2026-11-13 11:28 [PATCH v2 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
  2026-11-13 11:28 ` [PATCH v2 2/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK SoM platform Gopikishan Thawre
@ 2026-11-13 11:28 ` Gopikishan Thawre
  2 siblings, 0 replies; 5+ messages in thread
From: Gopikishan Thawre @ 2026-11-13 11:28 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Richard Cochran
  Cc: linux-arm-msm, devicetree, linux-kernel, netdev,
	Gopikishan Thawre, Vishnu Saini, Khalid Faisal Ansari,
	Ajinkya Inchure, Anuj Tripathi

Add the device tree for the LeMans Draco EVK platform which combines
the LeMans Draco EVK SoM and Draco carrier board.

This device tree adds board-specific peripheral configuration on top
of the SoM, including:

- I2C GPIO expanders (TCA6416/PCA9534) on i2c2 and i2c18
- EEPROM with MAC address nvmem layout on i2c18
- Native DisplayPort output (DP0-DP3)
- Dual Ethernet (ethernet0/ethernet1) with HSGMII PHY over SerDes
- ST33HTPM TPM over SPI16
- AMC6821 fan controller on i2c4

Co-developed-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Co-developed-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Co-developed-by: Ajinkya Inchure <ainchure@qti.qualcomm.com>
Signed-off-by: Ajinkya Inchure <ainchure@qti.qualcomm.com>
Co-developed-by: Anuj Tripathi <anuj.tripathi@oss.qualcomm.com>
Signed-off-by: Anuj Tripathi <anuj.tripathi@oss.qualcomm.com>
Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   5 +
 arch/arm64/boot/dts/qcom/lemans-draco-evk.dts | 543 ++++++++++++++++++++++++++
 2 files changed, 548 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4e714251d5e6..f1713d53af5f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -50,6 +50,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9650-rdp488.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-draco-evk.dtb
+
+lemans-draco-evk-el2-dtbs := lemans-draco-evk.dtb lemans-el2.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-draco-evk-el2.dtb
 
 lemans-evk-camera-csi1-imx577-dtbs	:= lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
 lemans-evk-camera-dtbs	:= lemans-evk.dtb lemans-evk-camera.dtbo
diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
new file mode 100644
index 000000000000..6dfbc8e2d8ff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "lemans-draco-som.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans Draco EVK";
+	compatible = "qcom,lemans-draco-evk", "qcom,lemans-draco-som",
+		     "qcom,qcs9100", "qcom,sa8775p";
+	chassis-type = "embedded";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+
+		dp-pwr-supply = <&vreg_dp0_pwr>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	dp1-connector {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+
+		dp-pwr-supply = <&vreg_dp1_pwr>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "full-size";
+
+		dp-pwr-supply = <&vreg_dp2_pwr>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "full-size";
+
+		dp-pwr-supply = <&vreg_dp3_pwr>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_out>;
+			};
+		};
+	};
+
+	vreg_dp0_pwr: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_DP0_PWR_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_dp1_pwr: regulator-dp1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_DP1_PWR_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&expander1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_dp2_pwr: regulator-dp2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_DP2_PWR_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&expander1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_dp3_pwr: regulator-dp3-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_DP3_PWR_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&expander1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&hsgmii_phy1>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet1_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+
+	nvmem-cells = <&mac_addr1>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy1: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	expander0: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@22 {
+		compatible = "ti,tca6416";
+		reg = <0x22>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@23 {
+		compatible = "ti,tca6416";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander4: gpio@38 {
+		compatible = "nxp,pca9534";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	fan_controller: fan@1a {
+		compatible = "ti,amc6821";
+		reg = <0x1a>;
+		#pwm-cells = <2>;
+
+		fan {
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+};
+
+&i2c18 {
+	status = "okay";
+
+	expander5: gpio@3c {
+		compatible = "nxp,pca9534";
+		reg = <0x3c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	eeprom@50 {
+		compatible = "giantec,gt24c256c", "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+
+			mac_addr1: mac-addr@6 {
+				reg = <0x6 0x6>;
+			};
+		};
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	pinctrl-0 = <&dp2_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp2_connector_in>;
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	pinctrl-0 = <&dp3_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp3_connector_in>;
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&qup_i2c4_default {
+	drive-strength = <6>;
+	bias-pull-up;
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&spi16 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&tlmm {
+
+	dp2_hot_plug_det: dp2-hot-plug-det-state {
+		pins = "gpio104";
+		function = "edp2_hot";
+		bias-disable;
+	};
+
+	dp3_hot_plug_det: dp3-hot-plug-det-state {
+		pins = "gpio103";
+		function = "edp3_hot";
+		bias-disable;
+	};
+
+	ethernet0_default: ethernet0-default-state {
+		ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	ethernet1_default: ethernet1-default-state {
+		ethernet1-mdc-pins {
+			pins = "gpio20";
+			function = "emac1_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet1-mdio-pins {
+			pins = "gpio21";
+			function = "emac1_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+};

-- 
2.43.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/3] dt-bindings: arm: qcom: Add LeMans Draco EVK board
  2026-11-13 11:28 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
@ 2026-11-16 12:11   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2026-11-16 12:11 UTC (permalink / raw)
  To: Gopikishan Thawre
  Cc: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Richard Cochran,
	linux-arm-msm, devicetree, linux-kernel, netdev

On Fri, Nov 13, 2026 at 04:58:57PM +0530, Gopikishan Thawre wrote:
> Add compatible strings for the LeMans Draco EVK, an evaluation board
> based on the SA8775P/QCS9100 SoC family.
> 
> The platform uses a two-board design: the LeMans Draco SoM carrying
> the SA8775P/QCS9100 SoC and core connectivity, paired with the Draco
> carrier board providing application-specific peripherals.
> 
> Add two compatibles to model this hierarchy:
>   - qcom,lemans-draco-som: identifies the SoM layer, allowing the
>     SoM device tree to be shared with a common carrier board.
>   - qcom,lemans-draco-evk: identifies the complete board (SoM + Draco
>     carrier), used in the board DTS.

Drop entire parapgraph. I asked to explain oddities, not standard and
expected way how System on Modules are used.

There is no point to explain the obvious.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-11-16 12:11 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-13 11:28 [PATCH v2 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
2026-11-13 11:28 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
2026-11-16 12:11   ` Krzysztof Kozlowski
2026-11-13 11:28 ` [PATCH v2 2/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK SoM platform Gopikishan Thawre
2026-11-13 11:28 ` [PATCH v2 3/3] arm64: dts: qcom: lemans: Add LeMans Draco EVK board Gopikishan Thawre

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®