* [PATCH 1/3] dt-bindings: arm: qcom: Add ASUS Ascent QN10
2026-11-14 4:28 [PATCH 0/3] arm64: dts: qcom: glymur: Add ASUS Ascent QN10 Bjorn Andersson
@ 2026-11-14 4:28 ` Bjorn Andersson
2026-11-14 4:28 ` [PATCH 2/3] arm64: dts: qcom: glymur: " Bjorn Andersson
2026-11-14 4:28 ` [PATCH 3/3] firmware: qcom: Allow QSEECOM on " Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2026-11-14 4:28 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Bjorn Andersson
The ASUS Ascent QN10 is a compact desktop computer based on the Qualcomm
Snapdragon X2 Elite (Glymur) platform, featuring an 18-core Oryon
CPU, Adreno X2-90 GPU, and Hexagon NPU. The system comes with 16 or 32GB
of LPDDR5x memory, two M.2 NVMe SSDs slots, Wi-Fi 7, Bluetooth 6.0, 2.5Gb
Ethernet, three USB Type-C ports, four USB Type-A port, and HDMI output.
Add a compatible for the device.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 7ffa4f69987f..a7157795870c 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -96,6 +96,7 @@ properties:
- items:
- enum:
+ - asus,ascent-qn10
- asus,zenbook-a14-ux3407na
- asus,zenbook-a16-ux3607oa
- hp,elitebook-x-g2q
--
2.55.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 2/3] arm64: dts: qcom: glymur: Add ASUS Ascent QN10
2026-11-14 4:28 [PATCH 0/3] arm64: dts: qcom: glymur: Add ASUS Ascent QN10 Bjorn Andersson
2026-11-14 4:28 ` [PATCH 1/3] dt-bindings: arm: qcom: " Bjorn Andersson
@ 2026-11-14 4:28 ` Bjorn Andersson
2026-11-14 4:28 ` [PATCH 3/3] firmware: qcom: Allow QSEECOM on " Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2026-11-14 4:28 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Bjorn Andersson
The ASUS Ascent QN10 is a compact desktop computer based on the Qualcomm
Snapdragon X2 Elite (Glymur) platform, featuring an 18-core Oryon
CPU, Adreno X2-90 GPU, and Hexagon NPU. The system comes with 16 or 32GB
of LPDDR5x memory, two M.2 NVMe SSDs slots, Wi-Fi 7, Bluetooth 6.0,
2.5Gb Ethernet, three USB Type-C ports, four USB Type-A ports, and HDMI
output.
The HDMI output is driven by the eDP output through a PS195 HDMI
converter. The four USB Type-A ports are connected to a GL3590 USB Hub,
on one of the USB MP ports. The Ethernet controller is attached on PCIe.
Introduce the DeviceTree for this board.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/glymur-asus-ascent-qn10.dts | 670 +++++++++++++++++++++
2 files changed, 671 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 8329c06b60a3..ff38c562f78d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096sg-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-cqs-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += glymur-asus-ascent-qn10.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-asus-zenbook-a14-ux3407na.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-asus-zenbook-a16-ux3607oa.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/glymur-asus-ascent-qn10.dts b/arch/arm64/boot/dts/qcom/glymur-asus-ascent-qn10.dts
new file mode 100644
index 000000000000..d61caa2b5022
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-asus-ascent-qn10.dts
@@ -0,0 +1,670 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include "glymur-cob.dtsi"
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ compatible = "asus,ascent-qn10", "qcom,glymur";
+ chassis-type = "desktop";
+ model = "ASUS Ascent QN10";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c5 = &i2c5;
+ i2c10 = &i2c10;
+ serial0 = &uart14;
+ };
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <38400000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ /* PS195 on eDP0 for HDMI connector. */
+ hdmi-bridge {
+ compatible = "parade,ps185hdm";
+
+ pinctrl-0 = <&edp0_hot_plug_default>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_bridge_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_bridge_out>;
+ };
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,glymur-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Rear Type-C port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in0: endpoint {
+ remote-endpoint = <&usb_0_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* Front left Type-C port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in1: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in1: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* Front right Type-C port */
+ connector@2 {
+ compatible = "usb-c-connector";
+ reg = <2>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in2: endpoint {
+ remote-endpoint = <&usb_2_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in2: endpoint {
+ remote-endpoint = <&usb_2_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ wlan-connector {
+ compatible = "pcie-m2-e-connector";
+ vpcie3v3-supply = <&vreg_wcn_3p3>;
+ vpcie1v8-supply = <&vreg_l15b0>;
+
+ w-disable1-gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+ w-disable2-gpios = <&tlmm 116 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m2_e_pcie_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&pcie4_port0_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m2_e_uart_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&uart14_ep>;
+ };
+ };
+ };
+ };
+};
+
+&rpmh_vregs_b_e0 {
+ vreg_l8b0: ldo8 {
+ regulator-name = "vreg_l8b0";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gmu {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ hid@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* PTN3222 on eUSB3, between USB MP0 and the GL3590 hub. */
+ hub_eusb_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ vdd3v3-supply = <&vreg_l8b0>;
+ vdd1v8-supply = <&vreg_l15b0>;
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ #phy-cells = <0>;
+ };
+};
+
+&i2c10 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ status = "okay";
+};
+
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&hdmi_bridge_in>;
+};
+
+&mdss_dp3_phy {
+ status = "okay";
+};
+
+&pcie3_phy {
+ status = "okay";
+};
+
+&pcie3b {
+ pinctrl-0 = <&pcie3b_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie3b_port0 {
+ reset-gpios = <&tlmm 155 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 157 GPIO_ACTIVE_LOW>;
+};
+
+&pcie4 {
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ status = "okay";
+};
+
+&pcie4_port0 {
+ reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ port {
+ pcie4_port0_ep: endpoint {
+ remote-endpoint = <&m2_e_pcie_ep>;
+ };
+ };
+};
+
+&pcie5 {
+ pinctrl-0 = <&pcie5_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie5_phy {
+ status = "okay";
+};
+
+&pcie5_port0 {
+ reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+};
+
+/* PCIe6 is wired to the RTL8125BP 2.5GbE controller. */
+&pcie6 {
+ pinctrl-0 = <&pcie6_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6_phy {
+ status = "okay";
+};
+
+&pcie6_port0 {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/glymur/ASUSTeK/QN10/qcadsp8480.mbn",
+ "qcom/glymur/ASUSTeK/QN10/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/glymur/ASUSTeK/QN10/qccdsp8480.mbn",
+ "qcom/glymur/ASUSTeK/QN10/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_soccp {
+ status = "okay";
+};
+
+&pmk8850_rtc {
+ status = "disabled";
+};
+
+&smb2370_l_e2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <4 4>, /* EC Secure */
+ <10 2>, /* OOB UART */
+ <44 4>, /* TPM */
+ <65 1>, /* EC reset */
+ <100 1>; /* Board ID */
+
+ ec_int_n_default: ec-int-n-state {
+ pins = "gpio66";
+ function = "gpio";
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ edp0_hot_plug_default: edp0-hot-plug-default-state {
+ pins = "gpio119";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6_default: pcie6-default-state {
+ clkreq-n-pins {
+ pins = "gpio150";
+ function = "pcie6_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio149";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio151";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie5_default: pcie5-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie5_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie3b_default: pcie3b-default-state {
+ clkreq-n-pins {
+ pins = "gpio156";
+ function = "pcie3b_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio155";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio157";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ port {
+ uart14_ep: endpoint {
+ remote-endpoint = <&m2_e_uart_ep>;
+ };
+ };
+};
+
+&uart21 {
+ status = "disabled";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_0_hsphy {
+ phys = <&smb2370_j_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ status = "okay";
+};
+
+&usb_0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in0>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in1>;
+};
+
+&usb_1_hsphy {
+ phys = <&smb2370_k_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in1>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in2>;
+};
+
+&usb_2_hsphy {
+ phys = <&smb2370_l_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+};
+
+&usb_2_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in2>;
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+/* MP0 (eUSB3 + USBSS3) -> GL3590 */
+&usb_mp_hsphy0 {
+ phys = <&hub_eusb_repeater>;
+
+ status = "okay";
+};
+
+/* MP1 (eUSB6 + USBSS4) -> not connected */
+&usb_mp_hsphy1 {
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ status = "okay";
+};
--
2.55.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 3/3] firmware: qcom: Allow QSEECOM on ASUS Ascent QN10
2026-11-14 4:28 [PATCH 0/3] arm64: dts: qcom: glymur: Add ASUS Ascent QN10 Bjorn Andersson
2026-11-14 4:28 ` [PATCH 1/3] dt-bindings: arm: qcom: " Bjorn Andersson
2026-11-14 4:28 ` [PATCH 2/3] arm64: dts: qcom: glymur: " Bjorn Andersson
@ 2026-11-14 4:28 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2026-11-14 4:28 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Bjorn Andersson
The ASUS Ascent QN10 provides functional uefisecapp over qseecom for EFI
variable access. Add the board to the allowlist.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
---
drivers/firmware/qcom/qcom_scm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 030e4ba90812..fa94eaa020c3 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -2226,6 +2226,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send);
*/
static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
{ .compatible = "acer,swift-go-sfa14-11" },
+ { .compatible = "asus,ascent-qn10" },
{ .compatible = "asus,vivobook-s15" },
{ .compatible = "asus,vivobook-s15-x1p4" },
{ .compatible = "asus,zenbook-a14-ux3407na" },
--
2.55.0
^ permalink raw reply [flat|nested] 4+ messages in thread