mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Jean-Baptiste Maneyrol via B4 Relay
	<devnull+jean-baptiste.maneyrol.tdk.com@kernel.org>
Cc: jean-baptiste.maneyrol@tdk.com,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] iio: imu: inv_icm42600: update gyro start and stop delay
Date: Fri, 13 Nov 2026 02:03:53 +0000	[thread overview]
Message-ID: <20261113020353.6d57fd46@jic23-hlaptop> (raw)
In-Reply-To: <20261110-iio-imu-inv-icm42600-update-gyro-start-stop-delay-v2-1-c6f5d35290d4@tdk.com>

On Tue, 10 Nov 2026 16:57:17 +0100
Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@kernel.org> wrote:

> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> 
> From internal specifications maximum start time for gyroscope is 45ms.
> Stop time is required for letting gyroscope mechanical structure settle
> down before enabling it back. 50ms is a sufficient value for that.
> 
> Update values to these numbers.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Applied to the testing branch of iio.git.

Thanks,

Jonathan

> ---
> Changes in v2:
> - Do not refer to datasheet since these values are not available.
> - Link to v1: https://patch.msgid.link/20261020-iio-imu-inv-icm42600-update-gyro-start-stop-delay-v1-1-ed52290a4ca4@tdk.com
> 
> To: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> To: Jonathan Cameron <jic23@kernel.org>
> To: David Lechner <dlechner@baylibre.com>
> To: Nuno Sá <nuno.sa@analog.com>
> To: Andy Shevchenko <andy@kernel.org>
> Cc: linux-iio@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/iio/imu/inv_icm42600/inv_icm42600.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> index 3737e79dbcc1..c4a928fd3b8a 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> @@ -439,8 +439,8 @@ struct inv_icm42600_sensor_state {
>  #define INV_ICM42600_POWER_UP_TIME_MS		100
>  #define INV_ICM42600_RESET_TIME_MS		1
>  #define INV_ICM42600_ACCEL_STARTUP_TIME_MS	20
> -#define INV_ICM42600_GYRO_STARTUP_TIME_MS	60
> -#define INV_ICM42600_GYRO_STOP_TIME_MS		150
> +#define INV_ICM42600_GYRO_STARTUP_TIME_MS	45
> +#define INV_ICM42600_GYRO_STOP_TIME_MS		50
>  #define INV_ICM42600_TEMP_STARTUP_TIME_MS	14
>  #define INV_ICM42600_SUSPEND_DELAY_MS		2000
>  
> 
> ---
> base-commit: 43ffda3c7f8456bbe641ae8249a077a361b97880
> change-id: 20261019-iio-imu-inv-icm42600-update-gyro-start-stop-delay-68dafe160210
> 
> Best regards,
> --  
> Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> 
> 


      reply	other threads:[~2026-11-13  2:03 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10 15:57 Jean-Baptiste Maneyrol via B4 Relay
2026-11-13  2:03 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261113020353.6d57fd46@jic23-hlaptop \
    --to=jic23@kernel.org \
    --cc=andy@kernel.org \
    --cc=devnull+jean-baptiste.maneyrol.tdk.com@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jean-baptiste.maneyrol@tdk.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®