* [PATCH v2] iio: imu: inv_icm42600: update gyro start and stop delay
@ 2026-11-10 15:57 Jean-Baptiste Maneyrol via B4 Relay
2026-11-13 2:03 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Jean-Baptiste Maneyrol via B4 Relay @ 2026-11-10 15:57 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko
Cc: linux-iio, linux-kernel, Jean-Baptiste Maneyrol
From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
From internal specifications maximum start time for gyroscope is 45ms.
Stop time is required for letting gyroscope mechanical structure settle
down before enabling it back. 50ms is a sufficient value for that.
Update values to these numbers.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
Changes in v2:
- Do not refer to datasheet since these values are not available.
- Link to v1: https://patch.msgid.link/20261020-iio-imu-inv-icm42600-update-gyro-start-stop-delay-v1-1-ed52290a4ca4@tdk.com
To: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
To: Jonathan Cameron <jic23@kernel.org>
To: David Lechner <dlechner@baylibre.com>
To: Nuno Sá <nuno.sa@analog.com>
To: Andy Shevchenko <andy@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index 3737e79dbcc1..c4a928fd3b8a 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -439,8 +439,8 @@ struct inv_icm42600_sensor_state {
#define INV_ICM42600_POWER_UP_TIME_MS 100
#define INV_ICM42600_RESET_TIME_MS 1
#define INV_ICM42600_ACCEL_STARTUP_TIME_MS 20
-#define INV_ICM42600_GYRO_STARTUP_TIME_MS 60
-#define INV_ICM42600_GYRO_STOP_TIME_MS 150
+#define INV_ICM42600_GYRO_STARTUP_TIME_MS 45
+#define INV_ICM42600_GYRO_STOP_TIME_MS 50
#define INV_ICM42600_TEMP_STARTUP_TIME_MS 14
#define INV_ICM42600_SUSPEND_DELAY_MS 2000
---
base-commit: 43ffda3c7f8456bbe641ae8249a077a361b97880
change-id: 20261019-iio-imu-inv-icm42600-update-gyro-start-stop-delay-68dafe160210
Best regards,
--
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v2] iio: imu: inv_icm42600: update gyro start and stop delay
2026-11-10 15:57 [PATCH v2] iio: imu: inv_icm42600: update gyro start and stop delay Jean-Baptiste Maneyrol via B4 Relay
@ 2026-11-13 2:03 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2026-11-13 2:03 UTC (permalink / raw)
To: Jean-Baptiste Maneyrol via B4 Relay
Cc: jean-baptiste.maneyrol, David Lechner, Nuno Sá,
Andy Shevchenko, linux-iio, linux-kernel
On Tue, 10 Nov 2026 16:57:17 +0100
Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@kernel.org> wrote:
> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
>
> From internal specifications maximum start time for gyroscope is 45ms.
> Stop time is required for letting gyroscope mechanical structure settle
> down before enabling it back. 50ms is a sufficient value for that.
>
> Update values to these numbers.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Applied to the testing branch of iio.git.
Thanks,
Jonathan
> ---
> Changes in v2:
> - Do not refer to datasheet since these values are not available.
> - Link to v1: https://patch.msgid.link/20261020-iio-imu-inv-icm42600-update-gyro-start-stop-delay-v1-1-ed52290a4ca4@tdk.com
>
> To: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> To: Jonathan Cameron <jic23@kernel.org>
> To: David Lechner <dlechner@baylibre.com>
> To: Nuno Sá <nuno.sa@analog.com>
> To: Andy Shevchenko <andy@kernel.org>
> Cc: linux-iio@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/iio/imu/inv_icm42600/inv_icm42600.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> index 3737e79dbcc1..c4a928fd3b8a 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
> @@ -439,8 +439,8 @@ struct inv_icm42600_sensor_state {
> #define INV_ICM42600_POWER_UP_TIME_MS 100
> #define INV_ICM42600_RESET_TIME_MS 1
> #define INV_ICM42600_ACCEL_STARTUP_TIME_MS 20
> -#define INV_ICM42600_GYRO_STARTUP_TIME_MS 60
> -#define INV_ICM42600_GYRO_STOP_TIME_MS 150
> +#define INV_ICM42600_GYRO_STARTUP_TIME_MS 45
> +#define INV_ICM42600_GYRO_STOP_TIME_MS 50
> #define INV_ICM42600_TEMP_STARTUP_TIME_MS 14
> #define INV_ICM42600_SUSPEND_DELAY_MS 2000
>
>
> ---
> base-commit: 43ffda3c7f8456bbe641ae8249a077a361b97880
> change-id: 20261019-iio-imu-inv-icm42600-update-gyro-start-stop-delay-68dafe160210
>
> Best regards,
> --
> Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-13 2:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-10 15:57 [PATCH v2] iio: imu: inv_icm42600: update gyro start and stop delay Jean-Baptiste Maneyrol via B4 Relay
2026-11-13 2:03 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®