* [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Axelera AI
2026-11-13 11:38 [PATCH v3 0/3] arm64: dts: rockchip: Add support for Axelera Embedded 111c Patrick Barsanti
@ 2026-11-13 11:38 ` Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 2/3] dt-bindings: arm: rockchip: Add Axelera Embedded 111c Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 3/3] arm64: dts: " Patrick Barsanti
2 siblings, 0 replies; 4+ messages in thread
From: Patrick Barsanti @ 2026-11-13 11:38 UTC (permalink / raw)
To: devicetree, linux-rockchip, linux-kernel, heiko, robh, krzk+dt, conor+dt
Cc: linux-amarula, michael, dario.binacchi, Patrick Barsanti, Conor Dooley
Axelera AI is an EU-based provider of AIPUs for edge AI inference.
Link: https://axelera.ai/
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 5471a06f93f1..20a3b24319c4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -221,6 +221,8 @@ patternProperties:
description: Avnet, Inc.
"^awinic,.*":
description: Shanghai Awinic Technology Co., Ltd.
+ "^axelera,.*":
+ description: Axelera AI B.V.
"^axentia,.*":
description: Axentia Technologies AB
"^axiado,.*":
--
2.53.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v3 2/3] dt-bindings: arm: rockchip: Add Axelera Embedded 111c
2026-11-13 11:38 [PATCH v3 0/3] arm64: dts: rockchip: Add support for Axelera Embedded 111c Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Axelera AI Patrick Barsanti
@ 2026-11-13 11:38 ` Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 3/3] arm64: dts: " Patrick Barsanti
2 siblings, 0 replies; 4+ messages in thread
From: Patrick Barsanti @ 2026-11-13 11:38 UTC (permalink / raw)
To: devicetree, linux-rockchip, linux-kernel, heiko, robh, krzk+dt, conor+dt
Cc: linux-amarula, michael, dario.binacchi, Patrick Barsanti,
Krzysztof Kozlowski
The Axelera Embedded 111c is an SBC based on the Rockchip RK3588
SoC.
Specification:
- Rockchip RK3588
- 16GB LPDDR4
- Axelera AI Metis AIPU, 4GB/16GB LPDDR4X
- 64GB eMMC
- uSD slot
- 2x SATA ports
- 2x Gigabit LAN
- 1x M.2 E key
- 1x M.2 B key
- 1x HDMI2.0
- 1x USB-C with DP
- 4x USB3.1
Link: https://axelera.ai/axelera-products/embedded/111c
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Changes in v3:
- Add Krzysztof's Acked-by
Changes in v2:
- Rename the board and its compatible following the name change from
metis-sbc to embedded-111c
- Drop Conor's Acked-by since the compatible has changed
Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index a24949b163cf..79a45a4bce65 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -120,6 +120,11 @@ properties:
- asus,rk3566-tinker-board-3s
- const: rockchip,rk3566
+ - description: Axelera Embedded 111c
+ items:
+ - const: axelera,embedded-111c
+ - const: rockchip,rk3588
+
- description: Beelink A1
items:
- const: azw,beelink-a1
--
2.53.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v3 3/3] arm64: dts: rockchip: Add Axelera Embedded 111c
2026-11-13 11:38 [PATCH v3 0/3] arm64: dts: rockchip: Add support for Axelera Embedded 111c Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Axelera AI Patrick Barsanti
2026-11-13 11:38 ` [PATCH v3 2/3] dt-bindings: arm: rockchip: Add Axelera Embedded 111c Patrick Barsanti
@ 2026-11-13 11:38 ` Patrick Barsanti
2 siblings, 0 replies; 4+ messages in thread
From: Patrick Barsanti @ 2026-11-13 11:38 UTC (permalink / raw)
To: devicetree, linux-rockchip, linux-kernel, heiko, robh, krzk+dt, conor+dt
Cc: linux-amarula, michael, dario.binacchi, Patrick Barsanti
Add minimal device tree for the Axelera Embedded 111c
(rk3588-axelera-embedded-111c).
It offers efficient AI compute for multi-stream computer vision and
GenAI applications in a compact design. It features a quad-core
Axelera AI Metis AIPU and an RK3588 SoC processor.
This basic version of the dts supports:
- Console
- eMMC
- HDMI
- 4x USB-A
- 2x Gigabit Ethernet
- RTC
- Enumeration of on-board Axelera Metis AIPU
Link: https://axelera.ai/axelera-products/embedded/111c
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
---
Changes in v3:
- Rename from rk3588-embedded-111c.dts to
rk3588-axelera-embedded-111c.dts
- Drop deprecated "regulator-suspend-microvolt" property
- Add Co-developed-by to the sign-off chain from Michael and Dario.
(The process was: the first version of the downstream dts for the
Rockchip kernel we've been using since 2024 was authored by Michael
with some of my help. The first version of this upstream dts was
co-developed by Dario and Michael together and in-person at a
workshop. Later on this was picked up by me and largely
re-written, but without their contribution and their prior work this
series would not exist. I hope having all three of us as
Co-developers on this patch, given the particular circumstances,
is alright :))
- Add Copyright from Amarula Solutions
Changes in v2:
- Prepend "regulator-" to regulator nodes
- Drop non-existent "mem-supply" binding
- Drop unneeded comment from rgmii-rxid; replace it with the one from
rk3588-youyeetoo-yy3588 to stop checkpatch from complaining
- Remove phy reset from the gmac node; note that these are still not
described in the phy node because GPIO3_B7 defaults to pull-down,
which causes the rgmii_phy1 node to never come up.
Describing the reset in the parent mdio node instead does not cause
the same issue
- Use the existing hdmim1_tx0_hpd pinctrl group instead of
redefining it
- Drop "full-pwr-cycle-in-suspend" from the eMMC node
- Add "vmmc-supply" and "vqmmc-supply" to the eMMC node
- Add pinctrl for the pmic interrupt pin
- Replace the "vcc3v3_hubreset" regulator hack with two GL3523 hubs
linked with "peer-hub".
- Drop the regulators that were defined but never referenced, and their
corresponding pinctrls
- Mux PCIEX4_PERST_N as GPIO, since it is being used as reset-gpios
- Drop unused input.h include
- Drop unused rtc label
- Drop the local pciex1 pinctrl groups, as they were duplicates of the
pcie30x1m1_1_* groups in the base pinctrl for the rk3588
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../rockchip/rk3588-axelera-embedded-111c.dts | 810 ++++++++++++++++++
2 files changed, 811 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-axelera-embedded-111c.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 442d322a20cf..51ddc17e98d3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e54c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-axelera-embedded-111c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-axelera-embedded-111c.dts b/arch/arm64/boot/dts/rockchip/rk3588-axelera-embedded-111c.dts
new file mode 100644
index 000000000000..0d760ee0f4e6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-axelera-embedded-111c.dts
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Amarula Solutions
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+ model = "Axelera Embedded 111c";
+ compatible = "axelera,embedded-111c", "rockchip,rk3588";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ mmc0 = &sdhci;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
+ pcie20_avdd0v85: regulator-pcie20-avdd0v85 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "pcie20_avdd0v85";
+ vin-supply = <&vdda_0v85_s0>;
+ };
+
+ pcie20_avdd1v8: regulator-pcie20-avdd1v8 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pcie20_avdd1v8";
+ vin-supply = <&vcca_1v8_s0>;
+ };
+
+ pcie30_avdd0v75: regulator-pcie30-avdd0v75 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "pcie30_avdd0v75";
+ vin-supply = <&hdmi_vdda0v85_s0>;
+ };
+
+ pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pcie30_avdd1v8";
+ vin-supply = <&vcca_1v8_s0>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc4v0_sys>;
+ };
+
+ vcc_1v8_pcie: regulator-vcc-1v8-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; /* PCIE30_PWREN_H */
+ pinctrl-0 = <&pcie30_pwren_h>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_pcie";
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc_1v8_s3>;
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-name = "12vsus";
+ };
+
+ vcc3v3_m2: regulator-vcc3v3-m2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_PWREN_H */
+ pinctrl-0 = <&pcie_pwren_h>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "3v_m2";
+ vin-supply = <&vcc3v3_sus>;
+ };
+
+ vcc3v3_sus: regulator-vcc3v3-sus {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "3vsus";
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc4v0_sys: regulator-vcc4v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-name = "vcc4v0_sys";
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* USB_HOST_PWREN */
+ pinctrl-0 = <&usb_host_pwren>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_host";
+ vin-supply = <&vcc5v0_sus>;
+ };
+
+ vcc5v0_sus: regulator-vcc5v0-sus {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "5vsus";
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ /* RX delay is added by the PHY, TX delay by the GMAC */
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus
+ &gmac0_rst_n>;
+ pinctrl-names = "default";
+ tx_delay = <0x44>;
+ status = "okay";
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ /* RX delay is added by the PHY, TX delay by the GMAC */
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus
+ &gmac1_rst_n>;
+ pinctrl-names = "default";
+ tx_delay = <0x43>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi0 {
+ pinctrl-0 = <&hdmim0_tx0_cec
+ &hdmim1_tx0_hpd
+ &hdmim0_tx0_scl
+ &hdmim0_tx0_sda>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi0_con_in>;
+ };
+};
+
+&hdmi0_sound {
+ status = "okay";
+};
+
+&hdptxphy0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+ fcs,suspend-voltage-selector = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+ fcs,suspend-voltage-selector = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1m2_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_npu_s0";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+ fcs,suspend-voltage-selector = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ };
+};
+
+&i2s5_8ch {
+ status = "okay";
+};
+
+&mdio0 {
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; /* GMAC0_RST_N */
+ reset-delay-us = <20000>;
+ reset-post-delay-us = <100000>;
+
+ rgmii_phy0: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ };
+};
+
+&mdio1 {
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; /* GMAC1_RST_N */
+ reset-delay-us = <20000>;
+ reset-post-delay-us = <100000>;
+
+ rgmii_phy1: phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x3>;
+ };
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x4 {
+ pinctrl-0 = <&pciex4_perst_n>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIEX4_PERST_N */
+ /*
+ * Add specific mapping required by the onboard
+ * Axelera Metis AIPU to function.
+ */
+ ranges = <0x81000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x100000
+ 0x82000000 0x0 0x40000000 0x9 0x00000000 0x0 0x20000000
+ 0xc3000000 0x0 0x60000000 0x9 0x20000000 0x0 0x20000000>;
+ /*
+ * Set to 1v8 because the electronics on the pcie3x4 slot
+ * do not receive 3v3 supply at all, but vpcie3v3-supply
+ * must be specified.
+ */
+ vpcie3v3-supply = <&vcc_1v8_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ gmac0 {
+ gmac0_rst_n: gmac0-rst-n {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gmac1 {
+ gmac1_rst_n: gmac1-rst-n {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pci {
+ pcie_pwren_h: pcie-pwren-h {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie30_pwren_h: pcie30-pwren-h {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pciex4_perst_n: pciex4-perst-n { /* pcie3x4 reset */
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_hub_rst_n: usb-hub-rst-n {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8_s0>;
+ status = "okay";
+};
+
+/* eMMC */
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clock-rates = <200000000>;
+ assigned-clocks = <&cru CLK_SPI2>;
+ num-cs = <1>;
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; /* PMIC_INT_L */
+ pinctrl-0 = <&pmic_pins>;
+ pinctrl-names = "default";
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+ vcc1-supply = <&vcc4v0_sys>;
+ vcc2-supply = <&vcc4v0_sys>;
+ vcc3-supply = <&vcc4v0_sys>;
+ vcc4-supply = <&vcc4v0_sys>;
+ vcc5-supply = <&vcc4v0_sys>;
+ vcc6-supply = <&vcc4v0_sys>;
+ vcc7-supply = <&vcc4v0_sys>;
+ vcc8-supply = <&vcc4v0_sys>;
+ vcc9-supply = <&vcc4v0_sys>;
+ vcc10-supply = <&vcc4v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc4v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc4v0_sys>;
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <800000>;
+ regulator-name = "vdd_log_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd_ddr_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdda_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ hdmi_vdda0v85_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <837500>;
+ regulator-max-microvolt = <837500>;
+ regulator-name = "hdmi_vdda0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ pinctrl-0 = <&usb_hub_rst_n>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb20_hub1: hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ peer-hub = <&usb30_hub1>;
+ reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; /* USB_HUB_RST_N */
+ vdd-supply = <&vcc_3v3_s3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb20_hub2: hub@4 {
+ compatible = "usb5e3,610";
+ reg = <4>;
+ peer-hub = <&usb30_hub2>;
+ vdd-supply = <&vcc_3v3_s3>;
+ };
+ };
+
+ usb30_hub1: hub@2 {
+ compatible = "usb5e3,620";
+ reg = <2>;
+ peer-hub = <&usb20_hub1>;
+ vdd-supply = <&vcc_3v3_s3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb30_hub2: hub@4 {
+ compatible = "usb5e3,620";
+ reg = <4>;
+ peer-hub = <&usb20_hub2>;
+ vdd-supply = <&vcc_3v3_s3>;
+ };
+ };
+};
+
+&usbdp_phy1 {
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
--
2.53.0
^ permalink raw reply [flat|nested] 4+ messages in thread