[PATCH 5/5] mips: lantiq: danube: rename NOR node on EASY50712 reference board

[Simon Wunderlich <sw@simonwunderlich.de>]

This fixes the following warning with the new lantiq,nor binding:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: nor-boot@0 (lantiq,nor): $nodename:0: 'nor-boot@0' does not match '^(flash|.*sram|nand)(@.*)?$'
	from schema $id: http://devicetree.org/schemas/mtd/lantiq,nor.yaml

The MTD device name comes from the driver and not from the node name,
and the board uses a built-in DTB, so only the name of the platform
device changes.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 arch/mips/boot/dts/lantiq/danube_easy50712.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index c9f7886f57b8..456d5d090c7f 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -25,7 +25,7 @@ localbus@0 {
 				1 0 0x4000000 0x4000010>; /* addsel1 */
 			compatible = "lantiq,localbus", "simple-bus";
 
-			nor-boot@0 {
+			flash@0 {
 				compatible = "lantiq,nor";
 				bank-width = <2>;
 				reg = <0 0x0 0x2000000>;
-- 
2.47.3