* [PATCH ipsec] xfrm6: gate the local error on the frame's own socket
@ 2026-11-14 12:55 Rustam Mustafin
0 siblings, 0 replies; only message in thread
From: Rustam Mustafin @ 2026-11-14 12:55 UTC (permalink / raw)
To: Steffen Klassert, Herbert Xu, David S. Miller
Cc: Eric Dumazet, Jakub Kicinski, Paolo Abeni, Simon Horman, netdev,
ipsec, linux-kernel, Rustam Mustafin, stable
__xfrm6_output() decides to report a too big frame as a local error by
looking at its sk argument, but xfrm_local_error() reports to skb->sk
and dereferences it unchecked. The two differ for a UDP tunnel: vxlan,
geneve and other udp_tunnel6_xmit_skb() users pass the tunnel socket as
sk, while a frame they forward has no skb->sk. When such a frame takes
an IPv6 tunnel mode xfrm bundle and exceeds its MTU, xfrm_local_error()
oopses on skb->sk->sk_family in softirq context:
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:xfrm_local_error+0x92/0x190
Call Trace:
<IRQ>
xfrm6_output+0x599/0xae0
udp_tunnel6_xmit_skb+0x713/0xd90
vxlan_xmit_one+0x1ebc/0x3490
vxlan_xmit+0x1369/0x6540
dev_hard_start_xmit+0xe3/0x5b0
__dev_queue_xmit+0x18e7/0x3550
ip6_output+0x360/0xec0
ip6_forward+0x1573/0x35c0
Commit 1620c88887b1 ("xfrm: Fix the usage of skb->sk") changed this
test from skb->sk to sk. Test skb_to_full_sk(skb) instead, as
xfrm6_tunnel_check_size() already does; commit 6973a21ee73c
("ipv6: xfrm: use full sockets in local error paths") made the IPv6
callees use full sockets the same way.
A frame without a socket then goes to ip6_fragment(), which sends an
ICMPv6 Packet Too Big to the source address of the outer header, the
local tunnel endpoint, and drops the frame, as before 1620c88887b1. A
caller that passes a NULL sk while skb->sk is set, such as
ip6tunnel_xmit(NULL, ...) in ip6_tunnel.c, takes the local error path
again, also as before that commit.
Fixes: 1620c88887b1 ("xfrm: Fix the usage of skb->sk")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Rustam Mustafin <rmustafin@cloudlinux.com>
---
Notes:
Tested in virtme-ng on 7e1392a42ea2 (v7.4-rc2+) with KASAN: vxlan over
an IPv6 ESP tunnel, a forwarded frame above the bundle MTU.
Unpatched: the oops above.
Patched: no oops in 3 runs. A separate run with nstat in the
forwarding netns shows Ip6FragFails 0->2, Icmp6OutPktTooBigs 0->2 and
Ip6FragCreates 0->0.
The reproducer script is available on request.
Not changed here:
- The xfrm6_local_dontfrag(sk) test in the same function still uses the
argument. Its callee xfrm6_local_rxpmtu() returns on a NULL skb->sk
since 6973a21ee73c, so that mismatch does not oops.
- iptfs_is_too_big() has the same sk vs skb->sk mismatch (IPv6 oops,
IPv4 silent drop). It is left for a separate patch; it was already
pointed out in two reviews:
https://lore.kernel.org/r/20260908224856.1591189-1-kuba@kernel.org
https://lore.kernel.org/r/179369310739.488856.16665150928122536725@kernel.org
net/ipv6/xfrm6_output.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 44b221a09a0c..54fcf4b43091 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -95,7 +95,10 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
} else if (toobig && xfrm6_noneed_fragment(skb)) {
skb->ignore_df = 1;
goto skip_frag;
- } else if (!skb->ignore_df && toobig && sk) {
+ } else if (!skb->ignore_df && toobig && skb_to_full_sk(skb)) {
+ /* xfrm_local_error() reports to skb->sk; a forwarded frame
+ * sent through a UDP tunnel has none, sk is the tunnel's.
+ */
xfrm_local_error(skb, mtu);
kfree_skb(skb);
return -EMSGSIZE;
base-commit: 7e1392a42ea288d70a266f6553fe06f57f8647ea
--
2.52.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-14 12:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-14 12:55 [PATCH ipsec] xfrm6: gate the local error on the frame's own socket Rustam Mustafin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®