From: Christian Ruppert <arc@gmx.li>
To: Will Porter <mrwillporter@gmail.com>
Cc: Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Andrews <neil@androos.io>, Christian Ruppert <arc@gmx.li>
Subject: [RFC V4 PATCH 02/19] ALSA: mixer_audient: explicitly define full control names
Date: Sun, 15 Nov 2026 22:43:19 +0100 [thread overview]
Message-ID: <20261115214336.17917-3-arc@gmx.li> (raw)
In-Reply-To: <20261112023720.1503814-1-mrwillporter@gmail.com>
Previously, control names were dynamically created depending if the
control was an input or an output, a volume or a switch. Get rid of this
logic by simply defining the full name in the control structure.
Signed-off-by: Christian Ruppert <arc@gmx.li>
Signed-off-by: Will Porter <mrwillporter@gmail.com>
---
sound/usb/mixer_audient.c | 50 +++++++++++----------------------------
1 file changed, 14 insertions(+), 36 deletions(-)
diff --git a/sound/usb/mixer_audient.c b/sound/usb/mixer_audient.c
index e2700b08cf80..2afef52a12d9 100644
--- a/sound/usb/mixer_audient.c
+++ b/sound/usb/mixer_audient.c
@@ -90,107 +90,92 @@ static const struct snd_audient_ctrl_type {
},
};
-#define SND_AUDIENT_FLAGS_DIRECTION (1L<<0)
-#define SND_AUDIENT_FLAGS_CAPTURE (1L<<0)
-#define SND_AUDIENT_FLAGS_PLAYBACK (0L<<0)
struct snd_audient_ctrl {
- char *basename;
+ char *name;
enum snd_audient_type type;
unsigned int channels;
unsigned int hwchannels;
unsigned int val_offs;
- unsigned long flags;
};
static const struct snd_audient_ctrl snd_audient_evo4_controls[] = {
{
- .basename = "Master",
+ .name = "Master Playback Switch",
.type = SND_AUDIENT_TYPE_MUTE_OUT,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Mic",
+ .name = "Mic Playback Switch",
.type = SND_AUDIENT_TYPE_MUTE,
.channels = 4,
.hwchannels = 2,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Monitor",
+ .name = "Monitor Playback Volume",
.type = SND_AUDIENT_TYPE_MONITOR,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Mic 1",
+ .name = "Mic 1 Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 2",
+ .name = "Mic 2 Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 2,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Master Left",
+ .name = "Master Left Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 4,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Master Right",
+ .name = "Master Right Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 6,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Loopback Left",
+ .name = "Loopback Left Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 8,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Loopback Right",
+ .name = "Loopback Right Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 10,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 1 Phantom",
+ .name = "Mic 1 Phantom Capture Switch",
.type = SND_AUDIENT_TYPE_PHANTOM,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 2 Phantom",
+ .name = "Mic 2 Phantom Capture Switch",
.type = SND_AUDIENT_TYPE_PHANTOM,
.channels = 1,
.hwchannels = 1,
.val_offs = 1,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{ 0 }, /* sentinel */
};
@@ -458,13 +443,12 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
{
const struct snd_audient_ctrl_type *ctype
= &snd_audient_ctypes[ctrl->type];
- char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
struct snd_kcontrol_new knew = { 0 };
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *elem;
knew.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
- knew.name = name;
+ knew.name = ctrl->name;
knew.info = snd_ctl_audient_info;
knew.private_value = snd_audient_kctl_priv(ctrl->type, ctrl->val_offs,
ctrl->hwchannels);
@@ -486,12 +470,6 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
return -EINVAL;
}
- snprintf(name, sizeof(name), "%s %s %s", ctrl->basename,
- ((ctrl->flags & SND_AUDIENT_FLAGS_DIRECTION)
- == SND_AUDIENT_FLAGS_CAPTURE) ? "Capture" : "Playback",
- (ctype->type == SNDRV_CTL_ELEM_TYPE_BOOLEAN)
- ? "Switch" : "Volume");
-
elem = kzalloc_obj(*elem);
if (!elem)
return -ENOMEM;
@@ -524,7 +502,7 @@ int snd_audient_controls_create(struct usb_mixer_interface *mixer)
if (!info->controls)
return -ENODEV;
- for (ctrl = info->controls; ctrl->basename; ctrl++) {
+ for (ctrl = info->controls; ctrl->name; ctrl++) {
const int ret = snd_audient_add_ctrl(mixer, ctrl);
if (ret < 0)
--
2.56.1
next prev parent reply other threads:[~2026-11-15 21:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <sashiko-outbox-201869@kernel.org>
2026-11-06 20:29 ` [RFC PATCH 13/16] ALSA: mixer_audient: Add enumerated controls Will Porter
2026-11-09 22:30 ` Christian Ruppert
2026-11-10 2:13 ` Will Porter
2026-11-10 20:57 ` Christian Ruppert
2026-11-12 2:37 ` [RFC PATCH 0/6] ALSA: mixer_audient: Cache rework and simplifications Will Porter
2026-11-12 2:37 ` [RFC PATCH 1/6] ALSA: mixer_audient: Fold in the review changes to patches 12-16 Will Porter
2026-11-12 2:37 ` [RFC PATCH 2/6] ALSA: mixer_audient: Use the cache of usb_mixer_elem_info Will Porter
2026-11-12 2:37 ` [RFC PATCH 3/6] ALSA: mixer_audient: Replace three flags with an access mode Will Porter
2026-11-12 2:37 ` [RFC PATCH 4/6] ALSA: mixer_audient: Fill the cache on first use Will Porter
2026-11-12 2:37 ` [RFC PATCH 5/6] ALSA: mixer_audient: Use one get and one put for all control types Will Porter
2026-11-12 2:37 ` [RFC PATCH 6/6] ALSA: mixer_audient: Use the same cache for the iD14 MkI FU 12 control Will Porter
2026-11-15 21:43 ` [RFC V4 PATCH 00/19] Re: ALSA: mixer_audient: Cache rework and simplifications Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 01/19] ALSA: rename mixer_evo to mixer_audient Christian Ruppert
2026-11-15 21:43 ` Christian Ruppert [this message]
2026-11-15 21:43 ` [RFC V4 PATCH 03/19] ALSA: mixer_audient: clarify USB control message definition Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 04/19] ALSA: mixer_audient: Add length check to USB transfer Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 05/19] ALSA: mixer_audient: make USB control transfer size configurable Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 06/19] ALSA: mixer_audient: Allow arbitrary boolean control values Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 07/19] ALSA: mixer_audient: Add integer range checks Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 08/19] ALSA: mixer_audient: Add control initialization at probe Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 09/19] ALSA: mixer_audient: Add readback-free parameter set Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 10/19] ALSA: mixer_audient: add control value caching Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 11/19] ALSA: mixer_audient: Create matrix programmatically Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 12/19] ALSA: mixer_audient: Add a step size to integer controls Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 13/19] ALSA: mixer_audient: Add enumerated controls Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 14/19] ALSA: usb-audio: Give the Audient iD14 MkI its own mixer map Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 15/19] ALSA: mixer_audient: Add Audient iD14 MkI controls Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 16/19] ALSA: mixer_audient: Replace the Audient iD14 MkI FU 12 control Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 17/19] ALSA: mixer_audient: Fold in the review changes to patches 12-16 Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 18/19] ALSA: mixer_audient: Unify snd_audient_*_set/get functions for different types Christian Ruppert
2026-11-15 21:43 ` [RFC V4 PATCH 19/19] ALSA: mixer_audient: Refactor FU12 special cases into generic set/get functions Christian Ruppert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261115214336.17917-3-arc@gmx.li \
--to=arc@gmx.li \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mrwillporter@gmail.com \
--cc=neil@androos.io \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®