mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] serial: 8250_aspeed_vuart: Fix potential stale port on probe failure
@ 2026-11-16 14:24 Guangshuo Li
  0 siblings, 0 replies; only message in thread
From: Guangshuo Li @ 2026-11-16 14:24 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby, Joel Stanley, Andrew Jeffery,
	Ryan Chen, Billy Tsai
  Cc: linux-kernel, linux-serial, linux-arm-kernel, linux-aspeed, stable

Invalid LPC configuration can fail probe after the UART port has been
registered. Removing only the sysfs group leaves a port whose private
data and mappings are released by device-managed cleanup.

Disable the VUART, shut down its timer and unregister the port before
returning from these failures.

This issue was found by our static analysis tool under development.

Fixes: ca03042f0f12 ("serial: 8250_aspeed_vuart: add aspeed, lpc-io-reg and aspeed, lpc-interrupts DT properties")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <liguangshuo@mail.sdu.edu.cn>
---
 drivers/tty/serial/8250/8250_aspeed_vuart.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index c8dc87f6886c..2cd1c9146ec8 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -513,7 +513,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	rc = aspeed_vuart_set_lpc_address(vuart, prop);
 	if (rc < 0) {
 		dev_err_probe(dev, rc, "invalid value in aspeed,lpc-io-reg property\n");
-		goto err_sysfs_remove;
+		goto err_unregister_port;
 	}
 
 	rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
@@ -525,14 +525,14 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
 	if (rc < 0) {
 		dev_err_probe(dev, rc, "invalid sirq number in aspeed,lpc-interrupts property\n");
-		goto err_sysfs_remove;
+		goto err_unregister_port;
 	}
 
 	sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
 	if (sirq_polarity < 0) {
 		rc = dev_err_probe(dev, sirq_polarity,
 				   "invalid sirq polarity in aspeed,lpc-interrupts property\n");
-		goto err_sysfs_remove;
+		goto err_unregister_port;
 	}
 
 	aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
@@ -543,6 +543,10 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_unregister_port:
+	aspeed_vuart_set_enabled(vuart, false);
+	timer_shutdown_sync(&vuart->unthrottle_timer);
+	serial8250_unregister_port(vuart->port);
 err_sysfs_remove:
 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
 	return rc;

base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-16 14:24 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-16 14:24 [PATCH] serial: 8250_aspeed_vuart: Fix potential stale port on probe failure Guangshuo Li

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®