mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup
@ 2026-11-16 16:01 David Yang
  2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

Various FDB defects. Assisted and verified on the hardware by LLM.

There are more gotchas about multi-bridge setup, but I'd leave that for
net-next since multi-bridge has always been tricky among DSA drivers.

v2:
 - include the CPU port when rewriting FDB entry
 - read the port PVID instead of bridge's
 - fix PVID when port joining/leaving bridge
v1: https://lore.kernel.org/r/20261111234110.1449602-1-mmyangfl@gmail.com

David Yang (4):
  net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries
  net: dsa: motorcomm: Rewrite FDB entry on port migration
  net: dsa: motorcomm: Read the port PVID instead of bridge's
  net: dsa: motorcomm: Use VID 0 as the unaware PVID

 drivers/net/dsa/motorcomm/chip.c | 160 +++++++++++++++++--------------
 1 file changed, 86 insertions(+), 74 deletions(-)

-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries
  2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
@ 2026-11-16 16:01 ` David Yang
  2026-11-16 16:01 ` [PATCH net v2 2/4] net: dsa: motorcomm: Rewrite FDB entry on port migration David Yang
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

When adding an fdb/mdb entry whose (address, VID) key already exists in
hardware, the existing egress ports were silently merged into the new
static entry. Ports learned by hardware are untracked by DSA and can
never be deleted. Replace the port mask instead of merging when the
existing entry is not static.

Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index c753c746490a..c6d0f000a163 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -799,7 +799,10 @@ yt921x_fdb_join(struct yt921x_priv *priv, const unsigned char *addr, u16 vid,
 
 	ctrl1 = val1 & ~YT921X_FDB_IO1_STATUS_M;
 	ctrl1 |= YT921X_FDB_IO1_STATUS_STATIC;
-	ctrl2 = val2 | YT921X_FDB_IO2_EGR_PORTS(ports_mask);
+	ctrl2 = val2;
+	if (ctrl1 != val1)
+		ctrl2 &= ~YT921X_FDB_IO2_EGR_PORTS_M;
+	ctrl2 |= YT921X_FDB_IO2_EGR_PORTS(ports_mask);
 	if (ctrl1 == val1 && ctrl2 == val2)
 		return 0;
 
-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH net v2 2/4] net: dsa: motorcomm: Rewrite FDB entry on port migration
  2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
  2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
@ 2026-11-16 16:01 ` David Yang
  2026-11-16 16:01 ` [PATCH net v2 3/4] net: dsa: motorcomm: Read the port PVID instead of bridge's David Yang
  2026-11-16 16:01 ` [PATCH net v2 4/4] net: dsa: motorcomm: Use VID 0 as the unaware PVID David Yang
  3 siblings, 0 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

When unicast addresses move between ports, DSA calls .port_fdb_add()
without a prior .port_fdb_del() call, making the new port directly OR
into the existing entries. The old port mask then loses track in DSA and
can never be deleted.

Fuse FDB join/leave into one change function, and rewrite the whole
entry on add with the bridge port mask as the leave mask, so that ports
left behind by the migration are dropped from the entry.

Note the commit only correctly covers single bridge usage. Multiple
bridge scenario was broken before, but now breaks in a different way;
that should be addressed in a following commit.

Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 95 ++++++++++++++++----------------
 1 file changed, 48 insertions(+), 47 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index c6d0f000a163..863ebb6c3198 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -729,13 +729,14 @@ yt921x_fdb_add(struct yt921x_priv *priv, const unsigned char *addr, u16 vid,
 }
 
 static int
-yt921x_fdb_leave(struct yt921x_priv *priv, const unsigned char *addr,
-		 u16 vid, u16 ports_mask)
+yt921x_fdb_update(struct yt921x_priv *priv, const unsigned char *addr,
+		  u16 vid, u16 leave_ports_mask, u16 join_ports_mask)
 {
 	u16 index;
 	u32 ctrl1;
 	u32 ctrl2;
 	u32 ctrl;
+	u32 val1;
 	u32 val2;
 	u32 val;
 	int res;
@@ -744,69 +745,63 @@ yt921x_fdb_leave(struct yt921x_priv *priv, const unsigned char *addr,
 	res = yt921x_fdb_has(priv, addr, vid, &index);
 	if (res)
 		return res;
-	if (index >= YT921X_FDB_NUM)
-		return 0;
+	if (index >= YT921X_FDB_NUM) {
+		if (!join_ports_mask)
+			return 0;
+
+		return yt921x_fdb_add(priv, addr, vid, join_ports_mask);
+	}
 
 	/* Check if action required */
 	res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2);
 	if (res)
 		return res;
 
-	ctrl2 = val2 & ~YT921X_FDB_IO2_EGR_PORTS(ports_mask);
-	if (ctrl2 == val2)
-		return 0;
-	if (!(ctrl2 & YT921X_FDB_IO2_EGR_PORTS_M)) {
-		ctrl = YT921X_FDB_OP_OP_DEL | YT921X_FDB_OP_START;
-		res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl);
-		if (res)
-			return res;
+	ctrl2 = val2 & ~YT921X_FDB_IO2_EGR_PORTS(leave_ports_mask);
+	if (!join_ports_mask) {
+		if (ctrl2 == val2)
+			return 0;
+
+		if (!(ctrl2 & YT921X_FDB_IO2_EGR_PORTS_M)) {
+			ctrl = YT921X_FDB_OP_OP_DEL | YT921X_FDB_OP_START;
+			res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl);
+			if (res)
+				return res;
 
-		return yt921x_fdb_wait(priv, &val);
+			return yt921x_fdb_wait(priv, &val);
+		}
 	}
 
-	res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &ctrl1);
+	res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &val1);
 	if (res)
 		return res;
 
+	ctrl1 = val1;
+	if (join_ports_mask) {
+		ctrl1 &= ~YT921X_FDB_IO1_STATUS_M;
+		ctrl1 |= YT921X_FDB_IO1_STATUS_STATIC;
+		if (ctrl1 != val1)
+			ctrl2 &= ~YT921X_FDB_IO2_EGR_PORTS_M;
+	}
+	ctrl2 |= YT921X_FDB_IO2_EGR_PORTS(join_ports_mask);
+	if (ctrl1 == val1 && ctrl2 == val2)
+		return 0;
+
 	return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2);
 }
 
+static int
+yt921x_fdb_leave(struct yt921x_priv *priv, const unsigned char *addr,
+		 u16 vid, u16 ports_mask)
+{
+	return yt921x_fdb_update(priv, addr, vid, ports_mask, 0);
+}
+
 static int
 yt921x_fdb_join(struct yt921x_priv *priv, const unsigned char *addr, u16 vid,
 		u16 ports_mask)
 {
-	u16 index;
-	u32 ctrl1;
-	u32 ctrl2;
-	u32 val1;
-	u32 val2;
-	int res;
-
-	/* Check for presence */
-	res = yt921x_fdb_has(priv, addr, vid, &index);
-	if (res)
-		return res;
-	if (index >= YT921X_FDB_NUM)
-		return yt921x_fdb_add(priv, addr, vid, ports_mask);
-
-	/* Check if action required */
-	res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &val1);
-	if (res)
-		return res;
-	res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2);
-	if (res)
-		return res;
-
-	ctrl1 = val1 & ~YT921X_FDB_IO1_STATUS_M;
-	ctrl1 |= YT921X_FDB_IO1_STATUS_STATIC;
-	ctrl2 = val2;
-	if (ctrl1 != val1)
-		ctrl2 &= ~YT921X_FDB_IO2_EGR_PORTS_M;
-	ctrl2 |= YT921X_FDB_IO2_EGR_PORTS(ports_mask);
-	if (ctrl1 == val1 && ctrl2 == val2)
-		return 0;
-
-	return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2);
+	return yt921x_fdb_update(priv, addr, vid, 0, ports_mask);
 }
 
 static int
@@ -877,10 +872,16 @@ yt921x_dsa_port_fdb_add(struct dsa_switch *ds, int port,
 			const unsigned char *addr, u16 vid, struct dsa_db db)
 {
 	struct yt921x_priv *priv = dsa_to_yt921x_priv(ds);
+	u32 bridge_ports_mask = 0;
 	int res;
 
+	if (db.type == DSA_DB_BRIDGE) {
+		bridge_ports_mask = dsa_bridge_ports(ds, db.bridge.dev);
+		bridge_ports_mask |= priv->cpu_ports_mask;
+	}
+
 	mutex_lock(&priv->reg_lock);
-	res = yt921x_fdb_join(priv, addr, vid, BIT(port));
+	res = yt921x_fdb_update(priv, addr, vid, bridge_ports_mask, BIT(port));
 	mutex_unlock(&priv->reg_lock);
 
 	return res;
-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH net v2 3/4] net: dsa: motorcomm: Read the port PVID instead of bridge's
  2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
  2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
  2026-11-16 16:01 ` [PATCH net v2 2/4] net: dsa: motorcomm: Rewrite FDB entry on port migration David Yang
@ 2026-11-16 16:01 ` David Yang
  2026-11-16 16:01 ` [PATCH net v2 4/4] net: dsa: motorcomm: Use VID 0 as the unaware PVID David Yang
  3 siblings, 0 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

The driver passed the bridge master to br_vlan_get_pvid(), returning the
bridge's own PVID (VID 1 by default) instead of the configured port's.
Query the PVID from dsa_port_to_bridge_port() instead.

Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 863ebb6c3198..d84d863080ce 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -952,18 +952,18 @@ static int
 yt921x_vlan_filtering(struct yt921x_priv *priv, int port, bool vlan_filtering)
 {
 	struct dsa_port *dp = dsa_to_port(&priv->ds, port);
-	struct net_device *bdev;
+	struct net_device *brport;
 	u16 pvid;
 	u32 mask;
 	u32 ctrl;
 	int res;
 
-	bdev = dsa_port_bridge_dev_get(dp);
+	brport = dsa_port_to_bridge_port(dp);
 
-	if (!bdev || !vlan_filtering)
+	if (!brport || !vlan_filtering)
 		pvid = YT921X_VID_UNWARE;
 	else
-		br_vlan_get_pvid(bdev, &pvid);
+		br_vlan_get_pvid(brport, &pvid);
 	res = yt921x_port_set_pvid(priv, port, pvid);
 	if (res)
 		return res;
@@ -1102,16 +1102,16 @@ yt921x_dsa_port_vlan_del(struct dsa_switch *ds, int port,
 	mutex_lock(&priv->reg_lock);
 	do {
 		struct dsa_port *dp = dsa_to_port(ds, port);
-		struct net_device *bdev;
+		struct net_device *brport;
 
 		res = yt921x_vlan_del(priv, port, vid);
 		if (res)
 			break;
 
-		bdev = dsa_port_bridge_dev_get(dp);
-		if (bdev) {
-			br_vlan_get_pvid(bdev, &pvid);
-			if (pvid == vid)
+		brport = dsa_port_to_bridge_port(dp);
+		if (brport) {
+			br_vlan_get_pvid(brport, &pvid);
+			if (!pvid)
 				res = yt921x_pvid_clear(priv, port);
 		}
 	} while (0);
@@ -1139,19 +1139,19 @@ yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port,
 	mutex_lock(&priv->reg_lock);
 	do {
 		struct dsa_port *dp = dsa_to_port(ds, port);
-		struct net_device *bdev;
+		struct net_device *brport;
 
 		res = yt921x_vlan_add(priv, port, vid,
 				      vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
 		if (res)
 			break;
 
-		bdev = dsa_port_bridge_dev_get(dp);
-		if (bdev) {
+		brport = dsa_port_to_bridge_port(dp);
+		if (brport) {
 			if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
 				res = yt921x_pvid_set(priv, port, vid);
 			} else {
-				br_vlan_get_pvid(bdev, &pvid);
+				br_vlan_get_pvid(brport, &pvid);
 				if (pvid == vid)
 					res = yt921x_pvid_clear(priv, port);
 			}
-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH net v2 4/4] net: dsa: motorcomm: Use VID 0 as the unaware PVID
  2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
                   ` (2 preceding siblings ...)
  2026-11-16 16:01 ` [PATCH net v2 3/4] net: dsa: motorcomm: Read the port PVID instead of bridge's David Yang
@ 2026-11-16 16:01 ` David Yang
  3 siblings, 0 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

The hardware classifies untagged and priority-tagged frames to the
port's PVID before the VLAN table lookup, and the FDB lookup key equals
the classified VID (measured on YT9215S).

The driver assigned PVID 4095 to the VLAN-unaware ports, while switchdev
reports the bridge's FDB entries with VID 0. These entries were then
installed under FID 0 and could never be hit by the hardware lookups.
Dynamic entries learnt under VID 4095, if any, took effect instead.

Lift the restriction on VLAN 0. Keep VLAN 0 out of the generic VLAN
add/delete paths, otherwise 8021q's automatic VLAN 0 filtering would
leave a stray CPU port bit behind.

Use VLAN 0 as the PVID of the VLAN-unaware ports. Program the PVID when
a port joins a VLAN-unaware bridge since DSA does not necessarily call
.port_vlan_filtering().

The standalone default of 4095 stays, so mislearnt entries, if any,
would not pollute the bridge FDB.

Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 44 +++++++++++++++++++-------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index d84d863080ce..aa4d6a0c930c 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -79,7 +79,7 @@ static const struct yt921x_info yt921x_infos[] = {
 	{}
 };
 
-#define YT921X_VID_UNWARE	4095
+#define YT921X_VID_STANDALONE	4095
 
 struct yt921x_reg_mdio {
 	struct mii_bus *bus;
@@ -960,8 +960,10 @@ yt921x_vlan_filtering(struct yt921x_priv *priv, int port, bool vlan_filtering)
 
 	brport = dsa_port_to_bridge_port(dp);
 
-	if (!brport || !vlan_filtering)
-		pvid = YT921X_VID_UNWARE;
+	if (!brport)
+		pvid = YT921X_VID_STANDALONE;
+	else if (!vlan_filtering)
+		pvid = 0;
 	else
 		br_vlan_get_pvid(brport, &pvid);
 	res = yt921x_port_set_pvid(priv, port, pvid);
@@ -1029,8 +1031,7 @@ yt921x_pvid_clear(struct yt921x_priv *priv, int port)
 
 	vlan_filtering = dsa_port_is_vlan_filtering(dp);
 
-	res = yt921x_port_set_pvid(priv, port,
-				   vlan_filtering ? 0 : YT921X_VID_UNWARE);
+	res = yt921x_port_set_pvid(priv, port, 0);
 	if (res)
 		return res;
 
@@ -1098,6 +1099,8 @@ yt921x_dsa_port_vlan_del(struct dsa_switch *ds, int port,
 
 	if (dsa_is_cpu_port(ds, port))
 		return 0;
+	if (!vid)
+		return 0;
 
 	mutex_lock(&priv->reg_lock);
 	do {
@@ -1135,6 +1138,11 @@ yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port,
 	 */
 	if (dsa_is_cpu_port(ds, port))
 		return 0;
+	/* VID 0 is the VLAN-unaware bridges' FDB domain; nothing to program,
+	 * keep the entry at reset defaults
+	 */
+	if (!vid)
+		return 0;
 
 	mutex_lock(&priv->reg_lock);
 	do {
@@ -1187,7 +1195,7 @@ static int yt921x_userport_standalone(struct yt921x_priv *priv, int port)
 	/* Unrelated since learning is off and all packets are trapped;
 	 * set it anyway
 	 */
-	res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE);
+	res = yt921x_port_set_pvid(priv, port, YT921X_VID_STANDALONE);
 	if (res)
 		return res;
 
@@ -1285,7 +1293,8 @@ static int yt921x_bridge_leave(struct yt921x_priv *priv, int port)
 }
 
 static int
-yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask)
+yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask,
+		   bool vlan_filtering)
 {
 	int res;
 
@@ -1297,6 +1306,14 @@ yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask)
 	if (res)
 		return res;
 
+	if (!vlan_filtering) {
+		/* DSA may shortcut .port_vlan_filtering(), leaving stale PVID
+		 */
+		res = yt921x_port_set_pvid(priv, port, 0);
+		if (res)
+			return res;
+	}
+
 	return 0;
 }
 
@@ -1427,7 +1444,8 @@ yt921x_dsa_port_bridge_join(struct dsa_switch *ds, int port,
 	mutex_lock(&priv->reg_lock);
 	pp->isolated = br_port_flag_is_set(brport_dev, BR_ISOLATED);
 	pp->hairpin = br_port_flag_is_set(brport_dev, BR_HAIRPIN_MODE);
-	res = yt921x_bridge_join(priv, port, ports_mask);
+	res = yt921x_bridge_join(priv, port, ports_mask,
+				 br_vlan_enabled(bridge.dev));
 	mutex_unlock(&priv->reg_lock);
 
 	return res;
@@ -2277,7 +2295,6 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
 {
 	struct dsa_switch *ds = &priv->ds;
 	unsigned long cpu_ports_mask;
-	u32 ctrls[2];
 	u32 ctrl;
 	int port;
 	int res;
@@ -2335,15 +2352,6 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
 	if (res)
 		return res;
 
-	/* Tagged VID 0 should be treated as untagged, which confuses the
-	 * hardware a lot
-	 */
-	ctrls[0] = YT921X_VLAN_CTRLa_LEARN_DIS | YT921X_VLAN_CTRLa_PORTS_M;
-	ctrls[1] = 0;
-	res = yt921x_reg64_write(priv, YT921X_VLANn_CTRL(0), ctrls);
-	if (res)
-		return res;
-
 	return 0;
 }
 
-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-11-16 16:02 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
2026-11-16 16:01 ` [PATCH net v2 2/4] net: dsa: motorcomm: Rewrite FDB entry on port migration David Yang
2026-11-16 16:01 ` [PATCH net v2 3/4] net: dsa: motorcomm: Read the port PVID instead of bridge's David Yang
2026-11-16 16:01 ` [PATCH net v2 4/4] net: dsa: motorcomm: Use VID 0 as the unaware PVID David Yang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®