mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Enver Ikromov <owner@ph4ntom-rev.uz>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Enver Ikromov <owner@ph4ntom-rev.uz>
Subject: [PATCH rtw-next v6 3/5] wifi: rtw89: restore channel when leaving idle on non-chanctx devices
Date: Tue, 17 Nov 2026 14:41:33 +0500	[thread overview]
Message-ID: <20261117094135.1772-4-owner@ph4ntom-rev.uz> (raw)
In-Reply-To: <20261117094135.1772-1-owner@ph4ntom-rev.uz>

Fix the operating channel not being restored after bringing a monitor
interface down and back up on devices that do not use native chanctx
callbacks (such as RTL8852AE when firmware lacks beacon filtering).

Stopping the interface powers down the PHY while mac80211 retains the
previous chandef and omits IEEE80211_CONF_CHANGE_CHANNEL on restart.
Record support_chanctx in rtwdev and set IEEE80211_CONF_CHANGE_CHANNEL
when re-entering monitor mode from idle on non-chanctx devices so the
channel is applied again.

Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
 drivers/net/wireless/realtek/rtw89/core.c     | 1 +
 drivers/net/wireless/realtek/rtw89/core.h     | 1 +
 drivers/net/wireless/realtek/rtw89/mac80211.c | 9 +++++++++
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 37ff745..8333b26 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -7761,6 +7761,7 @@ struct rtw89_dev *rtw89_alloc_ieee80211_hw(struct device *device,
 	rtwdev->board = info->board;
 	rtwdev->fw.req.firmware = firmware;
 	rtwdev->fw.fw_format = fw_format;
+	rtwdev->support_chanctx = !no_chanctx;
 	rtwdev->support_mlo = support_mlo;
 
 	bitmap_copy(rtwdev->quirks, &chip->default_quirks, NUM_OF_RTW89_QUIRKS);
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 8e93cf1..780ec47 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -7703,6 +7703,7 @@ struct rtw89_dev {
 	const struct rtw89_io_ops *io;
 
 	bool dbcc_en;
+	bool support_chanctx;
 	bool support_mlo;
 	enum rtw89_mlo_dbcc_mode mlo_dbcc_mode;
 	struct rtw89_hw_scan_info scan_info;
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index 7a55fed..a385e57 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -89,6 +89,7 @@ static void rtw89_ops_stop(struct ieee80211_hw *hw, bool suspend)
 static int rtw89_ops_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
 {
 	struct rtw89_dev *rtwdev = hw->priv;
+	bool no_chanctx = !rtwdev->support_chanctx;
 
 	lockdep_assert_wiphy(hw->wiphy);
 
@@ -97,6 +98,14 @@ static int rtw89_ops_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
 
 	rtw89_leave_ps_mode(rtwdev);
 
+	if (no_chanctx &&
+	    (changed & (IEEE80211_CONF_CHANGE_IDLE |
+			IEEE80211_CONF_CHANGE_MONITOR)) ==
+	    (IEEE80211_CONF_CHANGE_IDLE | IEEE80211_CONF_CHANGE_MONITOR)) {
+		if (!(hw->conf.flags & IEEE80211_CONF_IDLE))
+			changed |= IEEE80211_CONF_CHANGE_CHANNEL;
+	}
+
 	if ((changed & IEEE80211_CONF_CHANGE_IDLE) &&
 	    !(hw->conf.flags & IEEE80211_CONF_IDLE))
 		rtw89_leave_ips(rtwdev);
-- 
2.56.0.windows.4


  parent reply	other threads:[~2026-11-17  9:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17  9:41 [PATCH rtw-next v6 0/5] wifi: rtw89: monitor mode and raw frame injection fixes Enver Ikromov
2026-11-17  9:41 ` [PATCH rtw-next v6 1/5] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
2026-11-17  9:41 ` [PATCH rtw-next v6 2/5] wifi: rtw89: handle negative rate index for injected frames Enver Ikromov
2026-11-17  9:41 ` Enver Ikromov [this message]
2026-11-18  6:30   ` [PATCH rtw-next v6 3/5] wifi: rtw89: restore channel when leaving idle on non-chanctx devices Zong-Zhe Yang
2026-11-17  9:41 ` [PATCH rtw-next v6 4/5] wifi: rtw89: avoid reading seq_ctrl on control frames Enver Ikromov
2026-11-17  9:41 ` [PATCH rtw-next v6 5/5] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK for injected frames Enver Ikromov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117094135.1772-4-owner@ph4ntom-rev.uz \
    --to=owner@ph4ntom-rev.uz \
    --cc=kevin_yang@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®