* [PATCH v2 0/2] Add SCMI regulators description on STM32MP21
@ 2026-11-17 18:28 Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 1/2] arm64: dts: st: add SCMI voltage domain regulators for STM32MP211 Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 2/2] arm64: dts: st: add SCMI regulators for stm32mp215f-dk board Patrick Delaunay
0 siblings, 2 replies; 3+ messages in thread
From: Patrick Delaunay @ 2026-11-17 18:28 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Conor Dooley, Mark Brown, Patrick Delaunay, devicetree,
linux-arm-kernel, linux-kernel, linux-stm32
Add the description for SCMI regulators provided by OP-TEE firmware.
The file named "stm32mp21-regulator.h" is also used in the OP-TEE
firmware to have the same SCMI voltd identifiers.
V2 of series [1]
[1] Add SCMI regulators description on STM32MP21
https://patchwork.kernel.org/series/1210600/
[2] [PATCH 1/3] dt-bindings: add STM32MP21 regulator bindings
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20261113151038.1.I3b816ba92be5ff94cfe86a2f1c643645416cdb2b@changeid/
Changes in v2:
- Drop the initial patch [2]
The mapping of which ID controls which physical SoC voltage rail or
STPMIC1 channel is defined inside OP-TEE SCMI server configuration.
It is not a part of device tree binding as pointed by Conor Dooley.
Patrick Delaunay (2):
arm64: dts: st: add SCMI voltage domain regulators for STM32MP211
arm64: dts: st: add SCMI regulators for stm32mp215f-dk board
arch/arm64/boot/dts/st/stm32mp21-regulator.h | 48 ++++++++++++++++++++
arch/arm64/boot/dts/st/stm32mp211.dtsi | 27 +++++++++++
arch/arm64/boot/dts/st/stm32mp215f-dk.dts | 23 ++++++++++
3 files changed, 98 insertions(+)
create mode 100644 arch/arm64/boot/dts/st/stm32mp21-regulator.h
---
base-commit: 666539eecdf4db623f5e3c3e55cf9f2dfad24aa4
branch: master
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 1/2] arm64: dts: st: add SCMI voltage domain regulators for STM32MP211
2026-11-17 18:28 [PATCH v2 0/2] Add SCMI regulators description on STM32MP21 Patrick Delaunay
@ 2026-11-17 18:28 ` Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 2/2] arm64: dts: st: add SCMI regulators for stm32mp215f-dk board Patrick Delaunay
1 sibling, 0 replies; 3+ messages in thread
From: Patrick Delaunay @ 2026-11-17 18:28 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Conor Dooley, Mark Brown, Patrick Delaunay, devicetree,
linux-arm-kernel, linux-kernel, linux-stm32
Add SCMI-based regulator descriptions in the STM32MP211 SoC DTS,
covering VDDIO1, VDDIO2, VDDIO3 and VDDA18ADC voltage domains.
These regulators are exposed through the SCMI voltage protocol
and will be referenced by board-level DTS files.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
Changes in v2:
- Move the SCMI ID definitions in stm32mp21-regulator.h
to the DTS directory; it is not a part of DT bindings
arch/arm64/boot/dts/st/stm32mp21-regulator.h | 48 ++++++++++++++++++++
arch/arm64/boot/dts/st/stm32mp211.dtsi | 27 +++++++++++
2 files changed, 75 insertions(+)
create mode 100644 arch/arm64/boot/dts/st/stm32mp21-regulator.h
diff --git a/arch/arm64/boot/dts/st/stm32mp21-regulator.h b/arch/arm64/boot/dts/st/stm32mp21-regulator.h
new file mode 100644
index 000000000000..bf26b7efd2ec
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp21-regulator.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2026, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DTS_STM32MP21_REGULATOR_H
+#define __DTS_STM32MP21_REGULATOR_H
+
+/* SCMI voltage domains identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_VDDIO1 0
+#define VOLTD_SCMI_VDDIO2 1
+#define VOLTD_SCMI_VDDIO3 2
+#define VOLTD_SCMI_ADC 3
+#define VOLTD_SCMI_VREFBUF 4
+
+/* STPMIC regulators (STPMIC25/STM32MP2L/STPMIC1L) */
+#define VOLTD_SCMI_STPMIC_BUCK1 5
+#define VOLTD_SCMI_STPMIC_BUCK2 6
+#define VOLTD_SCMI_STPMIC_BUCK3 7
+#define VOLTD_SCMI_STPMIC_BUCK4 8
+#define VOLTD_SCMI_STPMIC_BUCK5 9
+#define VOLTD_SCMI_STPMIC_BUCK6 10
+#define VOLTD_SCMI_STPMIC_BUCK7 11
+#define VOLTD_SCMI_STPMIC_LDO1 12
+#define VOLTD_SCMI_STPMIC_LDO2 13
+#define VOLTD_SCMI_STPMIC_LDO3 14
+#define VOLTD_SCMI_STPMIC_LDO4 15
+#define VOLTD_SCMI_STPMIC_LDO5 16
+#define VOLTD_SCMI_STPMIC_LDO6 17
+#define VOLTD_SCMI_STPMIC_LDO7 18
+#define VOLTD_SCMI_STPMIC_LDO8 19
+#define VOLTD_SCMI_STPMIC_REFDDR 20
+#define VOLTD_SCMI_STPMIC_GPO1 21
+#define VOLTD_SCMI_STPMIC_GPO2 22
+#define VOLTD_SCMI_STPMIC_GPO3 23
+#define VOLTD_SCMI_STPMIC_GPO4 24
+#define VOLTD_SCMI_STPMIC_GPO5 25
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0 26
+#define VOLTD_SCMI_REGU1 27
+#define VOLTD_SCMI_REGU2 28
+#define VOLTD_SCMI_REGU3 29
+#define VOLTD_SCMI_REGU4 30
+
+#endif /* __DTS_STM32MP21_REGULATOR_H */
diff --git a/arch/arm64/boot/dts/st/stm32mp211.dtsi b/arch/arm64/boot/dts/st/stm32mp211.dtsi
index 4bfd58b26b51..84a2b51d705f 100644
--- a/arch/arm64/boot/dts/st/stm32mp211.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp211.dtsi
@@ -4,6 +4,7 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "stm32mp21-regulator.h"
/ {
#address-cells = <2>;
@@ -67,6 +68,32 @@ scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
+
+ scmi_voltd: protocol@17 {
+ reg = <0x17>;
+
+ scmi_regu: regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_vddio1: regulator@0 {
+ reg = <VOLTD_SCMI_VDDIO1>;
+ regulator-name = "vddio1";
+ };
+ scmi_vddio2: regulator@1 {
+ reg = <VOLTD_SCMI_VDDIO2>;
+ regulator-name = "vddio2";
+ };
+ scmi_vddio3: regulator@2 {
+ reg = <VOLTD_SCMI_VDDIO3>;
+ regulator-name = "vddio3";
+ };
+ scmi_vdda18adc: regulator@3 {
+ reg = <VOLTD_SCMI_ADC>;
+ regulator-name = "vdda18adc";
+ };
+ };
+ };
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] arm64: dts: st: add SCMI regulators for stm32mp215f-dk board
2026-11-17 18:28 [PATCH v2 0/2] Add SCMI regulators description on STM32MP21 Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 1/2] arm64: dts: st: add SCMI voltage domain regulators for STM32MP211 Patrick Delaunay
@ 2026-11-17 18:28 ` Patrick Delaunay
1 sibling, 0 replies; 3+ messages in thread
From: Patrick Delaunay @ 2026-11-17 18:28 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Conor Dooley, Mark Brown, Patrick Delaunay, devicetree,
linux-arm-kernel, linux-kernel, linux-stm32
Add SCMI-based regulator nodes:
- vddcore (BUCK1)
- vdd3v3_usb (LDO4)
- vdd_flash (LDO5)
- vdda_1v8 (LDO6)
- v3v3 (GPO1)
These regulators are provided through the SCMI voltage protocol
and will be used by on-board peripherals.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
(no changes since v1)
arch/arm64/boot/dts/st/stm32mp215f-dk.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp215f-dk.dts b/arch/arm64/boot/dts/st/stm32mp215f-dk.dts
index a1285abc80ca..fc7010bf8d88 100644
--- a/arch/arm64/boot/dts/st/stm32mp215f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp215f-dk.dts
@@ -48,6 +48,29 @@ &bsec {
bootph-all;
};
+&scmi_regu {
+ scmi_vddcore: regulator@5 {
+ reg = <VOLTD_SCMI_STPMIC_BUCK1>;
+ regulator-name = "vddcore";
+ };
+ scmi_vdd3v3_usb: regulator@f {
+ reg = <VOLTD_SCMI_STPMIC_LDO4>;
+ regulator-name = "vdd3v3_usb";
+ };
+ scmi_vdd_flash: regulator@10 {
+ reg = <VOLTD_SCMI_STPMIC_LDO5>;
+ regulator-name = "vdd_flash";
+ };
+ scmi_vdda_1v8: regulator@11 {
+ reg = <VOLTD_SCMI_STPMIC_LDO6>;
+ regulator-name = "vdda_1v8";
+ };
+ scmi_v3v3: regulator@15 {
+ reg = <VOLTD_SCMI_STPMIC_GPO1>;
+ regulator-name = "v3v3";
+ };
+};
+
&usart2 {
status = "okay";
};
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-17 18:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-17 18:28 [PATCH v2 0/2] Add SCMI regulators description on STM32MP21 Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 1/2] arm64: dts: st: add SCMI voltage domain regulators for STM32MP211 Patrick Delaunay
2026-11-17 18:28 ` [PATCH v2 2/2] arm64: dts: st: add SCMI regulators for stm32mp215f-dk board Patrick Delaunay
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®