mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Frédéric Mahé" <frederic.mahe@cirad.fr>
To: Stephen Boyd <sboyd@kernel.org>, Yixun Lan <dlan@kernel.org>
Cc: "Brian Masney" <bmasney+clk@redhat.com>,
	"Jerome Brunet" <jbrunet+clk@baylibre.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Troy Mitchell" <troy.mitchell@linux.spacemit.co>,
	"Haylen Chu" <heylenay@4d2.org>,
	"Hung-Chun Tseng" <alan.tseng.cs@gmail.com>,
	"Paul Walmsley" <pjw@kernel.org>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Alexandre Ghiti" <alex@ghiti.fr>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	"Frédéric Mahé" <frederic.mahe@cirad.fr>
Subject: [PATCH 3/6] clk: spacemit: k1: Add RCPU2 PWM clocks
Date: Tue, 17 Nov 2026 21:59:48 +0100	[thread overview]
Message-ID: <20261117205951.140146-4-frederic.mahe@cirad.fr> (raw)
In-Reply-To: <20261117205951.140146-1-frederic.mahe@cirad.fr>

The ten RCPU2 PWMs each have a mux/divider/gate clock in the RCPU2
system controller, fed by pll1_aud_24p5 or pll1_aud_245p7. Register
layout from the vendor kernel.

Written with help from Claude (Anthropic); reviewed and tested on hardware.

Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
---
 drivers/clk/spacemit/ccu-k1.c | 42 +++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 364388ff8..25be335eb 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -705,6 +705,33 @@ CCU_GATE_DEFINE(emac1_ptp_clk, CCU_PARENT_HW(pll2_d6), APMU_EMAC1_CLK_RES_CTRL,
 CCU_GATE_DEFINE(emmc_bus_clk, CCU_PARENT_HW(pmua_aclk), APMU_PMUA_EM_CLK_RES_CTRL, BIT(3), 0);
 /* APMU clocks end */
 
+/* RCPU2 clocks start */
+static const struct clk_parent_data rcpu2_pwm_parents[] = {
+	CCU_PARENT_HW(pll1_aud_24p5),
+	CCU_PARENT_HW(pll1_aud_245p7),
+};
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm0_clk, rcpu2_pwm_parents, RCPU2_PWM0_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm1_clk, rcpu2_pwm_parents, RCPU2_PWM1_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm2_clk, rcpu2_pwm_parents, RCPU2_PWM2_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm3_clk, rcpu2_pwm_parents, RCPU2_PWM3_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm4_clk, rcpu2_pwm_parents, RCPU2_PWM4_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm5_clk, rcpu2_pwm_parents, RCPU2_PWM5_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm6_clk, rcpu2_pwm_parents, RCPU2_PWM6_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm7_clk, rcpu2_pwm_parents, RCPU2_PWM7_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm8_clk, rcpu2_pwm_parents, RCPU2_PWM8_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+CCU_MUX_DIV_GATE_DEFINE(rcpu2_pwm9_clk, rcpu2_pwm_parents, RCPU2_PWM9_CLK_RST, 8, 11, 4, 2,
+			BIT(1), 0);
+/* RCPU2 clocks end */
+
 static struct clk_hw *k1_ccu_pll_hws[] = {
 	[CLK_PLL1]		= &pll1.common.hw,
 	[CLK_PLL2]		= &pll2.common.hw,
@@ -981,8 +1008,23 @@ static const struct spacemit_ccu_data k1_ccu_rcpu_data = {
 	.reset_name	= "k1-rcpu-reset",
 };
 
+static struct clk_hw *k1_ccu_rcpu2_hws[] = {
+	[CLK_RCPU2_PWM0]	= &rcpu2_pwm0_clk.common.hw,
+	[CLK_RCPU2_PWM1]	= &rcpu2_pwm1_clk.common.hw,
+	[CLK_RCPU2_PWM2]	= &rcpu2_pwm2_clk.common.hw,
+	[CLK_RCPU2_PWM3]	= &rcpu2_pwm3_clk.common.hw,
+	[CLK_RCPU2_PWM4]	= &rcpu2_pwm4_clk.common.hw,
+	[CLK_RCPU2_PWM5]	= &rcpu2_pwm5_clk.common.hw,
+	[CLK_RCPU2_PWM6]	= &rcpu2_pwm6_clk.common.hw,
+	[CLK_RCPU2_PWM7]	= &rcpu2_pwm7_clk.common.hw,
+	[CLK_RCPU2_PWM8]	= &rcpu2_pwm8_clk.common.hw,
+	[CLK_RCPU2_PWM9]	= &rcpu2_pwm9_clk.common.hw,
+};
+
 static const struct spacemit_ccu_data k1_ccu_rcpu2_data = {
 	.reset_name	= "k1-rcpu2-reset",
+	.hws		= k1_ccu_rcpu2_hws,
+	.num		= ARRAY_SIZE(k1_ccu_rcpu2_hws),
 };
 
 static const struct spacemit_ccu_data k1_ccu_apbc2_data = {
-- 
2.47.3


  parent reply	other threads:[~2026-11-17 21:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 20:59 [PATCH 0/6] riscv: spacemit: k1: RCPU2 PWM clocks and the BPI-F3 fan Frédéric Mahé
2026-11-17 20:59 ` [PATCH 1/6] dt-bindings: clock: spacemit: k1: Add RCPU2 PWM clocks Frédéric Mahé
2026-11-17 20:59 ` [PATCH 2/6] clk: spacemit: k1: Keep pll1_aud_245p7 enabled Frédéric Mahé
2026-11-18 11:15   ` Yixun Lan
2026-11-17 20:59 ` Frédéric Mahé [this message]
2026-11-17 20:59 ` [PATCH 4/6] riscv: dts: spacemit: k1: Add RCPU2 PWM nodes Frédéric Mahé
2026-11-17 20:59 ` [PATCH 5/6] riscv: dts: spacemit: k1-bananapi-f3: Add PWM fan Frédéric Mahé
2026-11-17 20:59 ` [PATCH 6/6] riscv: defconfig: Enable PWM fan support Frédéric Mahé
2026-11-17 21:16 ` [PATCH 0/6] riscv: spacemit: k1: RCPU2 PWM clocks and the BPI-F3 fan Frédéric Mahé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117205951.140146-4-frederic.mahe@cirad.fr \
    --to=frederic.mahe@cirad.fr \
    --cc=alan.tseng.cs@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=heylenay@4d2.org \
    --cc=jbrunet+clk@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=spacemit@lists.linux.dev \
    --cc=troy.mitchell@linux.spacemit.co \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®