mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Frédéric Mahé" <frederic.mahe@cirad.fr>
To: Stephen Boyd <sboyd@kernel.org>, Yixun Lan <dlan@kernel.org>
Cc: "Brian Masney" <bmasney+clk@redhat.com>,
	"Jerome Brunet" <jbrunet+clk@baylibre.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Troy Mitchell" <troy.mitchell@linux.spacemit.co>,
	"Haylen Chu" <heylenay@4d2.org>,
	"Hung-Chun Tseng" <alan.tseng.cs@gmail.com>,
	"Paul Walmsley" <pjw@kernel.org>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Alexandre Ghiti" <alex@ghiti.fr>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	"Frédéric Mahé" <frederic.mahe@cirad.fr>
Subject: [PATCH 5/6] riscv: dts: spacemit: k1-bananapi-f3: Add PWM fan
Date: Tue, 17 Nov 2026 21:59:50 +0100	[thread overview]
Message-ID: <20261117205951.140146-6-frederic.mahe@cirad.fr> (raw)
In-Reply-To: <20261117205951.140146-1-frederic.mahe@cirad.fr>

The fan header (J27) has a PWM line driven by GPIO 79 in its RCPU2
PWM2 function. Add the pin group, the fan with the vendor's four
levels at 100 kHz, and active trips on the package sensor at 40, 55,
70 and 85 C, as in the vendor DT.

Tested on a BPI-F3: J27 pin 3 averages 0.86, 1.76, 2.74 and 4.66 V
for 25, 50, 75 and 100% duty (multimeter, 0.04 V off), and the fan
goes to level 1 when the package reaches 40 C under load.

Written with help from Claude (Anthropic); reviewed and tested on hardware.

Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
---
 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 63 +++++++++++++++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |  7 +++
 2 files changed, 70 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 58035d886..e69289cc0 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -37,6 +37,13 @@ led1 {
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&rpwm2 0 10000 0>;
+		cooling-levels = <0 64 128 192 255>;
+		#cooling-cells = <2>;
+	};
+
 	pcie_vcc_3v3: regulator-pcie-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "PCIE_VCC3V3";
@@ -427,3 +434,59 @@ &sdhci0 {
 	sd-uhs-sdr104;
 	status = "okay";
 };
+
+&rpwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpwm2_0_cfg>;
+	status = "okay";
+};
+
+&{/thermal-zones/package-thermal} {
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <40000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <55000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		package_fan2: package-fan2 {
+			temperature = <70000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		package_fan3: package-fan3 {
+			temperature = <85000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan 0 1>;
+		};
+
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 1 2>;
+		};
+
+		map2 {
+			trip = <&package_fan2>;
+			cooling-device = <&fan 2 3>;
+		};
+
+		map3 {
+			trip = <&package_fan3>;
+			cooling-device = <&fan 3 4>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index 8c57ca05d..1f31f3177 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -587,6 +587,13 @@ pwm14-1-pins {
 		};
 	};
 
+	rpwm2_0_cfg: rpwm2-0-cfg {
+		rpwm2-0-pins {
+			pinmux = <K1_PADCONF(79, 2)>;
+			bias-pull-down;
+		};
+	};
+
 	ssp3_0_cfg: ssp3-0-cfg {
 		ssp3-0-pins {
 			pinmux = <K1_PADCONF(75, 2)>,	/* SCLK */
-- 
2.47.3


  parent reply	other threads:[~2026-11-17 21:01 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 20:59 [PATCH 0/6] riscv: spacemit: k1: RCPU2 PWM clocks and the BPI-F3 fan Frédéric Mahé
2026-11-17 20:59 ` [PATCH 1/6] dt-bindings: clock: spacemit: k1: Add RCPU2 PWM clocks Frédéric Mahé
2026-11-17 20:59 ` [PATCH 2/6] clk: spacemit: k1: Keep pll1_aud_245p7 enabled Frédéric Mahé
2026-11-18 11:15   ` Yixun Lan
2026-11-17 20:59 ` [PATCH 3/6] clk: spacemit: k1: Add RCPU2 PWM clocks Frédéric Mahé
2026-11-17 20:59 ` [PATCH 4/6] riscv: dts: spacemit: k1: Add RCPU2 PWM nodes Frédéric Mahé
2026-11-17 20:59 ` Frédéric Mahé [this message]
2026-11-17 20:59 ` [PATCH 6/6] riscv: defconfig: Enable PWM fan support Frédéric Mahé
2026-11-17 21:16 ` [PATCH 0/6] riscv: spacemit: k1: RCPU2 PWM clocks and the BPI-F3 fan Frédéric Mahé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117205951.140146-6-frederic.mahe@cirad.fr \
    --to=frederic.mahe@cirad.fr \
    --cc=alan.tseng.cs@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=heylenay@4d2.org \
    --cc=jbrunet+clk@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=spacemit@lists.linux.dev \
    --cc=troy.mitchell@linux.spacemit.co \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®