* [PATCH net-next] net: sfp: add 2500base-X quirk for ODI DFP-34X-2C3
@ 2026-11-18 2:56 github
0 siblings, 0 replies; only message in thread
From: github @ 2026-11-18 2:56 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, linux, andrew, hkallweit1, davem, edumazet, kuba,
pabeni, Israel Cueto
From: Israel Cueto <github@bumblecito.com>
The ODI DFP-34X-2C3 XPON SFP module supports 2500Base-X.
Add a quirk to enable 2500Base-X support for this module.
Tested on a Horaco ZX-SWTGW2C8F switch with an ODI
DFP-34X-2C3 module. A 2500 Mb/s link was established
with speed and duplex forced and autonegotiation disabled.
Signed-off-by: Israel Cueto <github@bumblecito.com>
---
drivers/net/phy/sfp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 915156743..666e515d2 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -606,6 +606,9 @@ static const struct sfp_quirk sfp_quirks[] = {
SFP_QUIRK("HSGQ", "HSGQ-XPON-Stick", sfp_quirk_2500basex,
sfp_fixup_ignore_tx_fault_and_los),
+ // ODI DFP-34X-2C3 XPON stick can operate at 2500base-X
+ SFP_QUIRK_S("ODI", "DFP-34X-2C3", sfp_quirk_2500basex),
+
// Lantech 8330-262D-E and 8330-265D can operate at 2500base-X, but
// incorrectly report 2500MBd NRZ in their EEPROM.
// Some 8330-265D modules have inverted LOS, while all of them report
--
2.34.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-18 2:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-18 2:56 [PATCH net-next] net: sfp: add 2500base-X quirk for ODI DFP-34X-2C3 github
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®