mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net] ipv6: fix ioam6_id_wide sysctl on 32-bit architectures
@ 2026-11-18  4:29 Shashank Mohan Jain
  0 siblings, 0 replies; only message in thread
From: Shashank Mohan Jain @ 2026-11-18  4:29 UTC (permalink / raw)
  To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
	Justin Iurman
  Cc: Simon Horman, netdev, linux-kernel

net.ipv6.ioam6_id_wide stores a u64 (netns_sysctl_ipv6.ioam6_id_wide),
but its table entry uses proc_doulongvec_minmax() with .maxlen =
sizeof(u64) and .extra2 pointing at a u64. On 32-bit, unsigned long is
4 bytes, so the handler treats the field as a vector of two 32-bit
values and reads the u64 max through an unsigned long pointer:

 - reading prints two numbers ("4294967295 16777215" by default on
   little-endian);
 - writing one value only replaces one half of the u64: on
   little-endian "echo 5 >" leaves 0x00ffffff00000005; on big-endian it
   sets the upper half, and the range check uses the upper word of
   ioam6_id_wide_max (0x00ffffff).

The wide namespace ID emitted in IOAM trace data is then not the
configured value. Same class of issue as commit 162cf592b577
("net/smc: fix limit_smc_hs sysctl on big-endian architecture").

There is no u64 variant of proc_doulongvec_minmax(), so use a small
local handler that goes through proc_dostring() and kstrtou64(). A
generic u64 helper in kernel/sysctl.c would be a larger change for net
and stable; it can follow separately. For normal input the handler
behaves as the 64-bit one does today: base 0 parsing (decimal, hex or
octal), surrounding white space is accepted, and values above
IOAM6_DEFAULT_ID_WIDE return -EINVAL. Input too long for the 24-byte
buffer is rejected rather than truncated by proc_dostring().

Found by reading the code with LLM assistance. Tested on i386 and x86_64
under QEMU: on i386 the sysctl now reads and writes a single 64-bit
value, and on x86_64 reads, writes and range checks behave as before.

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Assisted-by: LLM
Signed-off-by: Shashank Mohan Jain <jain.sm@gmail.com>
---
Prepared with Claude Code (Anthropic), model Claude Opus 5.5
(claude-opus-5-5).

Based on net.git main 2a324a58a084. Built for x86_64, i386 and 32-bit
powerpc (pmac32_defconfig); W=1 shows no warnings for
sysctl_net_ipv6.c before or after.

Runtime tested on i386 and x86_64 under QEMU (TCG), with a small static
test program as init: default read, echo 5, the maximum, max + 1,
values above U64_MAX, -1, non-numeric, hex, white space, over-long
input, two-part writes with sysctl_writes_strict 1 and 0, and a new
netns. Before this change i386 read "4294967295 16777215", and after
"echo 5" it read "5 16777215". With it, i386 gives the same results as
x86_64. On x86_64 two corner cases change: a write of only "\n" is now
a no-op instead of -EINVAL, and a number with 21 to 23 digits (only
possible with leading zeros) is now accepted.

I did not add Cc: stable; please add it if you think it fits.

 net/ipv6/sysctl_net_ipv6.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 1a0a36dcd..7bac56b9c 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -30,6 +30,39 @@ static u32 rt6_multipath_hash_fields_all_mask =
 static u32 ioam6_id_max = IOAM6_DEFAULT_ID;
 static u64 ioam6_id_wide_max = IOAM6_DEFAULT_ID_WIDE;
 
+/* unsigned long is 32-bit on some arches, so handle the u64 here */
+static int proc_ioam6_id_wide(const struct ctl_table *table, int write,
+			      void *buffer, size_t *lenp, loff_t *ppos)
+{
+	u64 *valp = table->data;
+	char buf[24] = "";
+	const struct ctl_table tmp = {
+		.data	= buf,
+		.maxlen	= sizeof(buf),
+	};
+	u64 val;
+	int ret;
+
+	if (!write) {
+		snprintf(buf, sizeof(buf), "%llu", READ_ONCE(*valp));
+		return proc_dostring(&tmp, write, buffer, lenp, ppos);
+	}
+
+	/* proc_dostring() would silently truncate a longer input */
+	if (*lenp >= sizeof(buf))
+		return -EINVAL;
+
+	ret = proc_dostring(&tmp, write, buffer, lenp, ppos);
+	if (ret || !buf[0])
+		return ret;
+
+	if (kstrtou64(strim(buf), 0, &val) || val > ioam6_id_wide_max)
+		return -EINVAL;
+
+	WRITE_ONCE(*valp, val);
+	return 0;
+}
+
 static int proc_rt6_multipath_hash_policy(const struct ctl_table *table, int write,
 					  void *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -210,8 +243,7 @@ static const struct ctl_table ipv6_table_template[] = {
 		.data		= &init_net.ipv6.sysctl.ioam6_id_wide,
 		.maxlen		= sizeof(u64),
 		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-		.extra2		= &ioam6_id_wide_max,
+		.proc_handler	= proc_ioam6_id_wide,
 	},
 };
 
-- 
2.43.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-18  4:30 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-18  4:29 [PATCH net] ipv6: fix ioam6_id_wide sysctl on 32-bit architectures Shashank Mohan Jain

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®