* [PATCH v2] HID: betop: add support for SPEEDLINK TORID
@ 2026-11-18 14:32 Jozef Riha
0 siblings, 0 replies; only message in thread
From: Jozef Riha @ 2026-11-18 14:32 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires; +Cc: linux-input, linux-kernel
The SPEEDLINK TORID wireless gamepad (11c0:9105) is a Betop based
device. Its output report has the same 4 byte layout as the other
devices handled by hid-betopff, with the motors in bytes 2 and 3.
Without the device ID the gamepad is bound to hid-generic and has no
force feedback. Add it to betop_devices[].
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Jozef Riha <jose1711@gmail.com>
---
v2:
- Fix From/Signed-off-by name mismatch
- Cc linux-input and LKML, v1 was sent to the HID maintainers only
drivers/hid/hid-betopff.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/hid/hid-betopff.c b/drivers/hid/hid-betopff.c
index f802046a688a..28ab0acce6ad 100644
--- a/drivers/hid/hid-betopff.c
+++ b/drivers/hid/hid-betopff.c
@@ -16,6 +16,9 @@
*
* 0x20bc:0x5500 "BTP2185 V2 BFM mode Joystick"
* - tested with BTP2171s.
+ *
+ * 0x11c0:0x9105 "SPEEDLINK TORID"
+ * - tested with Speedlink TORID wireless gamepad.
* Copyright (c) 2014 Huang Bo <huangbobupt@163.com>
*/
@@ -137,6 +140,7 @@ static int betop_probe(struct hid_device *hdev, const struct hid_device_id *id)
static const struct hid_device_id betop_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185PC, 0x5506) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185PC, 0x9105) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2PC, 0x1850) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2BFM, 0x5500) },
{ }
--
2.56.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-18 14:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-18 14:32 [PATCH v2] HID: betop: add support for SPEEDLINK TORID Jozef Riha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®