* [PATCH RESEND] remoteproc: qcom_q6v5_mss: Fix off-by-one error in regulator error cleanup
@ 2026-11-18 17:53 Sailesh Nandanavanam
0 siblings, 0 replies; only message in thread
From: Sailesh Nandanavanam @ 2026-11-18 17:53 UTC (permalink / raw)
To: andersson, mathieu.poirier
Cc: quic_akdwived, dmitry.baryshkov, konrad.dybcio, linux-arm-msm,
linux-remoteproc, linux-kernel, Sailesh Nandanavanam, stable
In q6v5_regulator_enable(), when any operation fails for regulator at
index 'i', the error cleanup path unconditionally calls
regulator_disable() starting from index 'i'. However, regulator 'i'
was never successfully enabled at this point, resulting in an
unbalanced disable.
There are three distinct failure points:
- regulator_set_voltage() failure: voltage was never set, load was
never set, regulator was never enabled.
- regulator_set_load() failure: voltage was set, but regulator was
never enabled.
- regulator_enable() failure: voltage and load were set, but
regulator was never enabled.
Fix this by introducing three separate error labels to handle each
failure point correctly. For the failing regulator at index 'i',
only reset the resources that were actually configured, without
calling regulator_disable(). Then roll back all previously enabled
regulators using 'i--' in the for loop initializer to skip the
never-enabled regulator.
Fixes: 19f902b53b47 ("remoteproc: qcom: Initialize and enable proxy and active regulators.")
Cc: stable@vger.kernel.org
Signed-off-by: Sailesh Nandanavanam <saileshnandanavanam@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Resend, rebased on next-20261117, no code changes. Reviewed by Dmitry
on Aug 18. Original posting:
https://lore.kernel.org/r/20260710194638.1502-1-saileshnandanavanam@gmail.com
drivers/remoteproc/qcom_q6v5_mss.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index dd052a62b858..692cbdece318 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -313,7 +313,7 @@ static int q6v5_regulator_enable(struct q6v5 *qproc,
dev_err(qproc->dev,
"Failed to request voltage for %d.\n",
i);
- goto err;
+ goto err_set_voltage;
}
}
@@ -323,20 +323,26 @@ static int q6v5_regulator_enable(struct q6v5 *qproc,
if (ret < 0) {
dev_err(qproc->dev,
"Failed to set regulator mode\n");
- goto err;
+ goto err_set_load;
}
}
ret = regulator_enable(regs[i].reg);
if (ret) {
dev_err(qproc->dev, "Regulator enable failed\n");
- goto err;
+ goto err_enable;
}
}
return 0;
-err:
- for (; i >= 0; i--) {
+err_enable:
+ if (regs[i].uA > 0)
+ regulator_set_load(regs[i].reg, 0);
+err_set_load:
+ if (regs[i].uV > 0)
+ regulator_set_voltage(regs[i].reg, 0, INT_MAX);
+err_set_voltage:
+ for (i--; i >= 0; i--) {
if (regs[i].uV > 0)
regulator_set_voltage(regs[i].reg, 0, INT_MAX);
--
2.34.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-18 17:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-18 17:53 [PATCH RESEND] remoteproc: qcom_q6v5_mss: Fix off-by-one error in regulator error cleanup Sailesh Nandanavanam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®