* [PATCH] iio: gyro: adxrs290: propagate chip ID read errors
@ 2026-11-19 3:07 Siqi Chen
0 siblings, 0 replies; only message in thread
From: Siqi Chen @ 2026-11-19 3:07 UTC (permalink / raw)
To: nish.malpani25, jic23
Cc: nuno.sa, Michael.Hennerich, dlechner, andy, linux-iio, linux,
linux-kernel, Siqi Chen
spi_w8r8() returns either an unsigned 8-bit value or a negative error.
The probe function stores its return value in a u8, truncating errors and
treating them as unexpected chip IDs. Consequently, an SPI transfer failure
is reported as -ENODEV instead of the actual error.
Store each result in an int and return negative errors before validating
the chip IDs.
OpenCode was used to identify the issue and draft the code and changelog.
Compile-tested with CONFIG_ADXRS290=m using:
make O=/tmp/opencode/linux-build-adxrs290 W=1 \
drivers/iio/gyro/adxrs290.o
No hardware or SPI fault-injection testing was performed.
Fixes: 2c8920fff145 ("iio: gyro: Add driver support for ADXRS290")
Signed-off-by: Siqi Chen <chensiqi@uniontech.com>
---
drivers/iio/gyro/adxrs290.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c
index b61cc81122a6..eb3306215217 100644
--- a/drivers/iio/gyro/adxrs290.c
+++ b/drivers/iio/gyro/adxrs290.c
@@ -604,7 +604,7 @@ static int adxrs290_probe(struct spi_device *spi)
struct iio_dev *indio_dev;
struct adxrs290_state *st;
u8 val, val2;
- int ret;
+ int id, ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
@@ -622,21 +622,27 @@ static int adxrs290_probe(struct spi_device *spi)
mutex_init(&st->lock);
- val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_ADI_ID));
- if (val != ADXRS290_ADI_ID) {
- dev_err(&spi->dev, "Wrong ADI ID 0x%02x\n", val);
+ id = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_ADI_ID));
+ if (id < 0)
+ return dev_err_probe(&spi->dev, id, "failed to read ADI ID\n");
+ if (id != ADXRS290_ADI_ID) {
+ dev_err(&spi->dev, "Wrong ADI ID 0x%02x\n", id);
return -ENODEV;
}
- val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_MEMS_ID));
- if (val != ADXRS290_MEMS_ID) {
- dev_err(&spi->dev, "Wrong MEMS ID 0x%02x\n", val);
+ id = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_MEMS_ID));
+ if (id < 0)
+ return dev_err_probe(&spi->dev, id, "failed to read MEMS ID\n");
+ if (id != ADXRS290_MEMS_ID) {
+ dev_err(&spi->dev, "Wrong MEMS ID 0x%02x\n", id);
return -ENODEV;
}
- val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_DEV_ID));
- if (val != ADXRS290_DEV_ID) {
- dev_err(&spi->dev, "Wrong DEV ID 0x%02x\n", val);
+ id = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_DEV_ID));
+ if (id < 0)
+ return dev_err_probe(&spi->dev, id, "failed to read DEV ID\n");
+ if (id != ADXRS290_DEV_ID) {
+ dev_err(&spi->dev, "Wrong DEV ID 0x%02x\n", id);
return -ENODEV;
}
base-commit: 903941a9b06ae445c70646ab061b604c2dea17d3
--
2.20.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-19 3:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-19 3:07 [PATCH] iio: gyro: adxrs290: propagate chip ID read errors Siqi Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®