mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicolae-Daniel Deaconescu <Nicolae-daniel.Deaconescu@analog.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Michael Hennerich" <michael.hennerich@analog.com>,
	"Trevor Gamblin" <tgamblin@baylibre.com>,
	"Joshua Crofts" <crofts@kernel.org>,
	"Sergiu Cuciurean" <sergiu.cuciurean@analog.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Nicolae-Daniel Deaconescu"
	<Nicolae-daniel.Deaconescu@analog.com>
Subject: [PATCH v4 4/6] iio: adc: ad7625: move initial mode setup
Date: Thu, 19 Nov 2026 13:24:18 +0200	[thread overview]
Message-ID: <20261119112437.197306-5-Nicolae-daniel.Deaconescu@analog.com> (raw)
In-Reply-To: <20261119112437.197306-1-Nicolae-daniel.Deaconescu@analog.com>

Move the EN pin mode setup from ad7625_probe() into
ad7625_set_initial_mode(). Pick the mode first and check the result of
setting it once, returning its error instead of -EINVAL. A following patch
adds parts without EN pins that skip it.

Signed-off-by: Nicolae-Daniel Deaconescu <Nicolae-daniel.Deaconescu@analog.com>
---
 drivers/iio/adc/ad7625.c | 52 ++++++++++++++++++++++------------------
 1 file changed, 29 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/adc/ad7625.c b/drivers/iio/adc/ad7625.c
index ade2f2368bd8..127441050687 100644
--- a/drivers/iio/adc/ad7625.c
+++ b/drivers/iio/adc/ad7625.c
@@ -561,6 +561,32 @@ static int devm_ad7625_regulator_setup(struct device *dev,
 	return 0;
 }
 
+static int ad7625_set_initial_mode(struct device *dev, struct ad7625_state *st)
+{
+	enum ad7960_mode mode;
+	int ret;
+
+	/* Set the device mode based on detected EN configuration. */
+	if (!st->info->has_bandwidth_control) {
+		ad7625_set_en_gpios_for_vref(st, st->have_refin, st->vref_mv);
+		return 0;
+	}
+
+	if (st->can_wide_bandwidth)
+		mode = AD7960_MODE_WIDE_BANDWIDTH;
+	else if (st->can_narrow_bandwidth)
+		mode = AD7960_MODE_NARROW_BANDWIDTH;
+	else
+		return dev_err_probe(dev, -EINVAL,
+			"couldn't set device to wide or narrow bandwidth modes\n");
+
+	ret = ad7960_set_mode(st, mode, st->have_refin, st->vref_mv);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set EN pins\n");
+
+	return 0;
+}
+
 static int ad7625_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -595,29 +621,9 @@ static int ad7625_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Set the device mode based on detected EN configuration. */
-	if (!st->info->has_bandwidth_control) {
-		ad7625_set_en_gpios_for_vref(st, st->have_refin, st->vref_mv);
-	} else {
-		/*
-		 * If neither sampling mode is available, then report an error,
-		 * since the other modes are not useful defaults.
-		 */
-		if (st->can_wide_bandwidth) {
-			ret = ad7960_set_mode(st, AD7960_MODE_WIDE_BANDWIDTH,
-					      st->have_refin, st->vref_mv);
-		} else if (st->can_narrow_bandwidth) {
-			ret = ad7960_set_mode(st, AD7960_MODE_NARROW_BANDWIDTH,
-					      st->have_refin, st->vref_mv);
-		} else {
-			return dev_err_probe(dev, -EINVAL,
-				"couldn't set device to wide or narrow bandwidth modes\n");
-		}
-
-		if (ret)
-			return dev_err_probe(dev, -EINVAL,
-					     "failed to set EN pins\n");
-	}
+	ret = ad7625_set_initial_mode(dev, st);
+	if (ret)
+		return ret;
 
 	ret = devm_ad7625_pwm_get(dev, st);
 	if (ret)
-- 
2.56.0


  parent reply	other threads:[~2026-11-19 11:25 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 11:24 [PATCH v4 0/6] iio: adc: ad7625: add LTC2387 and ADAQ2387x support Nicolae-Daniel Deaconescu
2026-11-19 11:24 ` [PATCH v4 1/6] pwm: core: add pwm_get_waveform_step_might_sleep() Nicolae-Daniel Deaconescu
2026-11-21 23:35   ` Jonathan Cameron
2026-11-19 11:24 ` [PATCH v4 2/6] pwm: axi-pwmgen: report the waveform step Nicolae-Daniel Deaconescu
2026-11-19 11:24 ` [PATCH v4 3/6] iio: adc: ad7625: fix sampling frequency handling Nicolae-Daniel Deaconescu
2026-11-19 11:24 ` Nicolae-Daniel Deaconescu [this message]
2026-11-21 23:40   ` [PATCH v4 4/6] iio: adc: ad7625: move initial mode setup Jonathan Cameron
2026-11-19 11:24 ` [PATCH v4 5/6] dt-bindings: iio: adc: add adi,ltc2387 Nicolae-Daniel Deaconescu
2026-11-19 11:24 ` [PATCH v4 6/6] iio: adc: ad7625: add LTC2387 and ADAQ2387x support Nicolae-Daniel Deaconescu
2026-11-21 23:48   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119112437.197306-5-Nicolae-daniel.Deaconescu@analog.com \
    --to=nicolae-daniel.deaconescu@analog.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=crofts@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    --cc=sergiu.cuciurean@analog.com \
    --cc=tgamblin@baylibre.com \
    --cc=ukleinek@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®