mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [RFC PATCH 00/28] media: add arm Mali-V76 video decoder driver
@ 2026-11-19 15:37 Charvi Mehta
  2026-11-19 15:37 ` [RFC PATCH 01/28] dt-bindings: media: add Arm Mali-V76 VPU Charvi Mehta
                   ` (27 more replies)
  0 siblings, 28 replies; 29+ messages in thread
From: Charvi Mehta @ 2026-11-19 15:37 UTC (permalink / raw)
  To: linux-media, devicetree, linux-kernel
  Cc: Charvi Mehta, Mauro Carvalho Chehab, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Philipp Zabel,
	Vincenzo Frascino, Rathinavel Sankaralingam, Shobhit Pandey

This series introduces support for the Arm Mali-V76 Video Processing Unit
(VPU), providing H.264 video stream decoding through the V4L2 stateful
memory-to-memory interface.

The Mali-V76 offloads video decoding from the application processor. The
host driver loads and manages the codec firmware, communicating with it
through asynchronous message queues, interrupts and RPC requests. It also
manages the firmware address space using the V76 internal MMU and controls
hardware resources through the LSID and job-queue interfaces.

The driver currently supports:

- H.264 decoding through the V4L2 stateful memory-to-memory interface.
- Multi-planar capture using V4L2_PIX_FMT_YUV420M, V4L2_PIX_FMT_NV12M
  and V4L2_PIX_FMT_NV21M, with MMAP and DMA-BUF buffer support.
- Variant-specific definitions of supported formats, frame sizes,
  controls and hardware resources.
- Explicit management of decoder and firmware states throughout
  stream setup, decoding and teardown.
- Asynchronous firmware loading and caching, with interrupt-driven
  communication for commands, buffer completion and firmware events.
- Separate control of OUTPUT and CAPTURE streaming, allowing CAPTURE
  buffers to be reconfigured during dynamic resolution changes.
- Decoder drain, end-of-stream and dynamic resolution change handling,
  including source-change events and LAST buffer signalling.
- Timestamp propagation and buffer metadata handling.
- Firmware error and unsupported-stream reporting.

The initial implementation supports a single active decoding session, with
hardware resource management handled through the V76 LSID and job-queue
interfaces. Support for additional codecs and concurrent sessions is
outside the scope of this series.

The series is based on media-committers/next.

To simplify the testing a tree with the new patches on top has been made
available at [1].

[1] https://gitlab.arm.com/media/vpu/charvi/linux.git mali/v76/v1

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Charvi Mehta <charvi.mehta@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Rathinavel Sankaralingam <rath.sankaralingam@arm.com>
Signed-off-by: Shobhit Pandey <shobhit.pandey@arm.com>

Testing
=======
The driver has been tested on Mali-V76 pre-silicon FPGA.

Static tools like checkpatch, smatch, dt_binding_check, sparse, checkstack
and Coccinelle run successfully with this driver.

The driver has been tested with v4l2-ctl[2] and Gstreamer[3],
v4l2-compliance [4] and Fluster [5].

[2] v4l2-ctl -d /dev/video0 --verbose \
--set-fmt-video-out=width=1920,height=1080,pixelformat=H264 \
--set-fmt-video=width=1920,height=1080,pixelformat=NM12 \
--stream-mmap=4 --stream-out-mmap=1 \
--stream-from /media/CrowdRun_1080p.264 --stream-to decoded.yuv

[3] gst-launch-1.0 -v filesrc location=/media/CrowdRun_720p.264 ! h264parse \
! v4l2h264dec ! filesink location=decoded.yuv sync=false

[4] V4l2 compliance was tested using v4l2-compliance 1.28.1:

v4l2-compliance -d /dev/video0 --stream-from /media/CrowdRun_1080p.264 -s 200

v4l2-compliance 1.28.1, 64 bits, 64-bit time_t

Compliance test for mali-vpu device /dev/video0:

Driver Info:
	Driver name      : mali-vpu
	Card type        : mali-vpu-decoder
	Bus info         : platform:6f030000.video-codec
	Driver version   : 7.4.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
	Detected Stateful Decoder

Required ioctls:
	test VIDIOC_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 2 Private Controls: 6

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test CREATE_BUFS maximum buffers: OK
	test VIDIOC_REMOVE_BUFS: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
	test blocking wait: OK
	Video Capture Multiplanar: Captured 632 buffers
	test MMAP (select): OK
	Video Capture Multiplanar: Captured 632 buffers
	test MMAP (epoll): OK
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for mali-vpu device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0

[5] Fluster was run with

GStreamer-H.264-V4L2 decoder:

Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2
Ran 78/135 tests successfully.

The failing tests:

52 test vectors fail as they are interlaced clips which mali-vpu does not
support.

List of these test vectors:
- cabac_mot_fld0_full
- cabac_mot_mbaff0_full
- cabac_mot_picaff0_full
- CABREF3_Sand_D
- CAFI1_SVA_C
- CAMA1_Sony_C
- CAMA1_TOSHIBA_B
- cama1_vtc_c
- cama2_vtc_b
- CAMA3_Sand_E
- cama3_vtc_b
- CAMACI3_Sony_C
- CAMANL1_TOSHIBA_B
- CAMANL2_TOSHIBA_B
- CAMANL3_Sand_E
- CAMASL3_Sony_B
- CAMP_MOT_MBAFF_L30
- CAMP_MOT_MBAFF_L31
- CANLMA2_Sony_C
- CANLMA3_Sony_C
- CAPA1_TOSHIBA_B
- CAPAMA3_Sand_F
- cavlc_mot_fld0_full_B
- cavlc_mot_mbaff0_full_B
- cavlc_mot_picaff0_full_B
- CVCANLMA2_Sony_C
- CVFI1_Sony_D
- CVFI1_SVA_C
- CVFI2_Sony_H
- CVFI2_SVA_C
- CVMA1_Sony_D
- CVMA1_TOSHIBA_B
- CVMANL1_TOSHIBA_B
- CVMANL2_TOSHIBA_B
- CVMAPAQP3_Sony_E
- CVMAQP2_Sony_G
- CVMAQP3_Sony_D
- CVMP_MOT_FLD_L30_B
- CVMP_MOT_FRM_L31_B
- CVNLFI1_Sony_C
- CVNLFI2_Sony_H
- CVPA1_TOSHIBA_B
- FI1_Sony_E
- MR6_BT_B
- MR7_BT_B
- MR8_BT_B
- MR9_BT_B
- Sharp_MP_Field_1_B
- Sharp_MP_Field_2_B
- Sharp_MP_Field_3_B
- Sharp_MP_PAFF_1r2
- Sharp_MP_PAFF_2r
2 test vectors failed because FMO is unsupported.
Test vectors: FM1_BT_B FM1_FT_E
2 test vectors failed because SP_SLICE type is unsupported.
Test vectors: SP1_BT_A sp2_bt_b
1 additional test vector, CVFC1_Sony_C completes decoding but fails checksum
verification due to a stride-handling issue in GStreamer 1.24.13. GStreamer
replaces the driver-reported 150-byte planar chroma stride with 152 bytes,
causing the decoded chroma planes to be read incorrectly.

Running test suite JVT-FR-EXT with decoder GStreamer-H.264-V4L2
Ran 25/69 tests successfully.

The failing tests:

21 test vectors failed due to interlaced clips. Interlaced decoding is not
supported in mali-vpu driver.

Test Vectors:
- brcm_freh10
- brcm_freh11
- brcm_freh4
- brcm_freh5
- brcm_freh6
- freh7_b
- FREXT01_JVC_D
- FREXT02_JVC_C
- FRExt2_Panasonic_C
- FRExt4_Panasonic_B
- HCAFF1_HHI_B
- HCAMFF1_HHI_B
- HCHP3_HHI_A
- HPCAFL_BRCM_C
- HPCAFLNL_BRCM_C
- HPCAMAPALQ_BRCM_B
- HPCVFL_BRCM_A HPCVFLNL_BRCM_A
- HVLCFI0_Sony_B
- HVLCMFF0_Sony_B
- HVLCPFF0_Sony_B

2 test vectors fail due to 10bit bitstream. 10 bit decoding support to be
enabled in subequent patches.
Test vectors: FREH10-1 FREH10-2

21 test vectors failed because 4:2:2 is not supported in this driver.
Test vectors:
- FREXT1_TANDBERG_A
- FREXT2_TANDBERG_A
- FREXT3_TANDBERG_A
- Hi422FR10_SONY_A
- Hi422FR11_SONY_A
- Hi422FR12_SONY_A
- Hi422FR1_SONY_A
- Hi422FR2_SONY_A
- Hi422FR3_SONY_A
- Hi422FR4_SONY_A
- Hi422FR13_SONY_A
- Hi422FR14_SONY_A
- Hi422FR15_SONY_A
- Hi422FR6_SONY_A
- Hi422FR7_SONY_A
- Hi422FR8_SONY_A
- Hi422FR9_SONY_A
- Hi422FREXT16_SONY_A
- Hi422FREXT17_SONY_A
- Hi422FREXT18_SONY_A
- Hi422FREXT19_SONY_A

Charvi Mehta (21):
  dt-bindings: media: add Arm Mali-V76 VPU
  media: mali-vpu: add Mali VPU platform driver
  media: mali-vpu: register V4L2 decoder device and add querycap ioctl
  media: mali-vpu: initialize decoder format state
  media: mali-vpu: add V4L2 mem2mem and VB2 queue support
  media: mali-vpu: implement format query ioctls
  media: mali-vpu: implement TRY_FMT and S_FMT ioctls
  media: mali-vpu: register V76 decoder controls and introduce UAPI
    controls
  media: mali-vpu: add firmware cache infrastructure
  media: mali-vpu: load firmware for decoder sessions
  media: mali-vpu: prepare firmware address space
  media: mali-vpu: add firmware message transport
  media: mali-vpu: route decoder controls to firmware
  media: mali-vpu: handle firmware RPC requests
  media: mali-vpu: add LSID hardware support
  media: mali-vpu: add single session scheduler
  media: mali-vpu: handle firmware interrupts
  media: mali-vpu: start decoder firmware through LSID scheduling
  media: mali-vpu: propagate buffer metadata
  media: mali-vpu: handle firmware event responses
  media: MAINTAINERS: add Arm Mali-V76 VPU driver

Rath Sankaralingam (4):
  media: mali-vpu: add MMU software page table manager
  media: mali-vpu: implement vb2 buffer queue handling
  media: mali-vpu: handle firmware buffer exchange
  media: mali-vpu: handle fatal firmware error

Shobhit Pandey (3):
  media: mali-vpu: add decoder EOS and DRC handling
  media: mali-vpu: handle firmware buffer parameters
  media: mali-vpu: add stateful decoder state machine

 .../bindings/media/arm,mali-v76.yaml          |   70 +
 MAINTAINERS                                   |   11 +
 drivers/media/platform/arm/Kconfig            |    1 +
 drivers/media/platform/arm/Makefile           |    1 +
 drivers/media/platform/arm/mali-vpu/Kconfig   |   17 +
 drivers/media/platform/arm/mali-vpu/Makefile  |   18 +
 .../platform/arm/mali-vpu/mali-vpu-buffer.c   |  426 +++++
 .../platform/arm/mali-vpu/mali-vpu-buffer.h   |  109 ++
 .../platform/arm/mali-vpu/mali-vpu-controls.c |  351 ++++
 .../platform/arm/mali-vpu/mali-vpu-controls.h |   71 +
 .../platform/arm/mali-vpu/mali-vpu-dec.c      |  226 +++
 .../platform/arm/mali-vpu/mali-vpu-dec.h      |   27 +
 .../platform/arm/mali-vpu/mali-vpu-device.h   |   72 +
 .../arm/mali-vpu/mali-vpu-firmware-cache.c    |  549 ++++++
 .../arm/mali-vpu/mali-vpu-firmware-cache.h    |  180 ++
 .../platform/arm/mali-vpu/mali-vpu-firmware.c | 1647 +++++++++++++++++
 .../platform/arm/mali-vpu/mali-vpu-firmware.h |  324 ++++
 .../platform/arm/mali-vpu/mali-vpu-formats.c  |   95 +
 .../platform/arm/mali-vpu/mali-vpu-formats.h  |   39 +
 .../platform/arm/mali-vpu/mali-vpu-lsid.c     |  271 +++
 .../platform/arm/mali-vpu/mali-vpu-lsid.h     |   58 +
 .../platform/arm/mali-vpu/mali-vpu-mmu.c      |  699 +++++++
 .../platform/arm/mali-vpu/mali-vpu-mmu.h      |  154 ++
 .../platform/arm/mali-vpu/mali-vpu-probe.c    |  387 ++++
 .../arm/mali-vpu/mali-vpu-protocol-def-v3.h   |  710 +++++++
 .../arm/mali-vpu/mali-vpu-registers.h         |   81 +
 .../arm/mali-vpu/mali-vpu-scheduler.c         |  248 +++
 .../arm/mali-vpu/mali-vpu-scheduler.h         |   58 +
 .../platform/arm/mali-vpu/mali-vpu-session.c  | 1260 +++++++++++++
 .../platform/arm/mali-vpu/mali-vpu-session.h  |  174 ++
 .../platform/arm/mali-vpu/mali-vpu-state.h    |  136 ++
 .../arm/mali-vpu/mali-vpu-variant-v76.c       |  188 ++
 .../platform/arm/mali-vpu/mali-vpu-variant.h  |   74 +
 .../platform/arm/mali-vpu/mali-vpu-vb2.c      |  187 ++
 .../platform/arm/mali-vpu/mali-vpu-vb2.h      |   13 +
 .../platform/arm/mali-vpu/mali-vpu-vidioc.c   |  365 ++++
 .../platform/arm/mali-vpu/mali-vpu-vidioc.h   |   17 +
 .../uapi/linux/media/arm/mali-vpu-config.h    |   47 +
 include/uapi/linux/v4l2-controls.h            |    6 +
 39 files changed, 9367 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/arm,mali-v76.yaml
 create mode 100644 drivers/media/platform/arm/mali-vpu/Kconfig
 create mode 100644 drivers/media/platform/arm/mali-vpu/Makefile
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-buffer.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-buffer.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-controls.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-controls.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-dec.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-dec.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-device.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware-cache.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware-cache.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-firmware.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-formats.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-formats.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-lsid.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-lsid.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-mmu.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-mmu.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-probe.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-protocol-def-v3.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-registers.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-scheduler.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-scheduler.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-session.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-session.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-state.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-variant-v76.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-variant.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vb2.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vb2.h
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vidioc.c
 create mode 100644 drivers/media/platform/arm/mali-vpu/mali-vpu-vidioc.h
 create mode 100644 include/uapi/linux/media/arm/mali-vpu-config.h

-- 
2.43.0


^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2026-11-19 15:39 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-19 15:37 [RFC PATCH 00/28] media: add arm Mali-V76 video decoder driver Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 01/28] dt-bindings: media: add Arm Mali-V76 VPU Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 02/28] media: mali-vpu: add Mali VPU platform driver Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 03/28] media: mali-vpu: register V4L2 decoder device and add querycap ioctl Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 04/28] media: mali-vpu: initialize decoder format state Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 05/28] media: mali-vpu: add V4L2 mem2mem and VB2 queue support Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 06/28] media: mali-vpu: implement format query ioctls Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 07/28] media: mali-vpu: implement TRY_FMT and S_FMT ioctls Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 08/28] media: mali-vpu: register V76 decoder controls and introduce UAPI controls Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 09/28] media: mali-vpu: add MMU software page table manager Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 10/28] media: mali-vpu: add firmware cache infrastructure Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 11/28] media: mali-vpu: load firmware for decoder sessions Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 12/28] media: mali-vpu: prepare firmware address space Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 13/28] media: mali-vpu: add firmware message transport Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 14/28] media: mali-vpu: route decoder controls to firmware Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 15/28] media: mali-vpu: handle firmware RPC requests Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 16/28] media: mali-vpu: add LSID hardware support Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 17/28] media: mali-vpu: add single session scheduler Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 18/28] media: mali-vpu: handle firmware interrupts Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 19/28] media: mali-vpu: start decoder firmware through LSID scheduling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 20/28] media: mali-vpu: implement vb2 buffer queue handling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 21/28] media: mali-vpu: handle firmware buffer exchange Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 22/28] media: mali-vpu: handle fatal firmware error Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 23/28] media: mali-vpu: propagate buffer metadata Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 24/28] media: mali-vpu: add decoder EOS and DRC handling Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 25/28] media: mali-vpu: handle firmware buffer parameters Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 26/28] media: mali-vpu: handle firmware event responses Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 27/28] media: mali-vpu: add stateful decoder state machine Charvi Mehta
2026-11-19 15:37 ` [RFC PATCH 28/28] media: MAINTAINERS: add Arm Mali-V76 VPU driver Charvi Mehta

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®