* [PATCH 1/2] i2c: mt7621: support big endian processors
2026-11-19 16:40 [PATCH 0/2] i2c: mt7621: enable for EcoNet devices Caleb James DeLisle
@ 2026-11-19 16:40 ` Caleb James DeLisle
2026-11-19 16:40 ` [PATCH 2/2] i2c: mt7621: enable for EcoNet devices Caleb James DeLisle
1 sibling, 0 replies; 3+ messages in thread
From: Caleb James DeLisle @ 2026-11-19 16:40 UTC (permalink / raw)
To: linux-i2c
Cc: sr, andi.shyti, matthias.bgg, angelogioacchino.delregno,
linux-kernel, linux-arm-kernel, linux-mediatek,
Caleb James DeLisle
Data is copied to and from I2C by way of a pair of IOMEM registers.
When sending, the data is copied to an intermediare buffer and then
written to the registers. However, the data is nominally little endian
but the registers are in CPU byte order. Make the buffer explicitly
little endian and use little endian read/write to support I2C on big
endian CPUs.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
---
drivers/i2c/busses/i2c-mt7621.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c
index 826abb9252e31..c79a47b293ef4 100644
--- a/drivers/i2c/busses/i2c-mt7621.c
+++ b/drivers/i2c/busses/i2c-mt7621.c
@@ -185,7 +185,8 @@ static int mtk_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
/* transfer data */
for (len = pmsg->len, j = 0; len > 0; len -= 8, j += 8) {
- u32 data[2] = { };
+ __le32 data[2] = { };
+ u32 val;
page_len = (len >= 8) ? 8 : len;
@@ -194,9 +195,12 @@ static int mtk_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
SM0CTL1_READ : SM0CTL1_READ_LAST;
} else {
memcpy(data, &pmsg->buf[j], page_len);
- iowrite32(data[0], i2c->base + REG_SM0D0_REG);
- if (page_len > 4)
- iowrite32(data[1], i2c->base + REG_SM0D1_REG);
+ val = le32_to_cpu(data[0]);
+ iowrite32(val, i2c->base + REG_SM0D0_REG);
+ if (page_len > 4) {
+ val = le32_to_cpu(data[1]);
+ iowrite32(val, i2c->base + REG_SM0D1_REG);
+ }
cmd = SM0CTL1_WRITE;
}
@@ -205,9 +209,12 @@ static int mtk_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
goto err_timeout;
if (pmsg->flags & I2C_M_RD) {
- data[0] = ioread32(i2c->base + REG_SM0D0_REG);
- if (page_len > 4)
- data[1] = ioread32(i2c->base + REG_SM0D1_REG);
+ val = ioread32(i2c->base + REG_SM0D0_REG);
+ data[0] = cpu_to_le32(val);
+ if (page_len > 4) {
+ val = ioread32(i2c->base + REG_SM0D1_REG);
+ data[1] = cpu_to_le32(val);
+ }
memcpy(&pmsg->buf[j], data, page_len);
} else {
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
--
2.39.5
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 2/2] i2c: mt7621: enable for EcoNet devices
2026-11-19 16:40 [PATCH 0/2] i2c: mt7621: enable for EcoNet devices Caleb James DeLisle
2026-11-19 16:40 ` [PATCH 1/2] i2c: mt7621: support big endian processors Caleb James DeLisle
@ 2026-11-19 16:40 ` Caleb James DeLisle
1 sibling, 0 replies; 3+ messages in thread
From: Caleb James DeLisle @ 2026-11-19 16:40 UTC (permalink / raw)
To: linux-i2c
Cc: sr, andi.shyti, matthias.bgg, angelogioacchino.delregno,
linux-kernel, linux-arm-kernel, linux-mediatek,
Caleb James DeLisle
EcoNet EN751221 uses the same I2C subsystem as the MT7621, allow
selection of this driver when building for EcoNet devices.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 275aaa7f35833..9295a35f4a181 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -918,7 +918,7 @@ config I2C_MT65XX
config I2C_MT7621
tristate "MT7621/MT7628 I2C Controller"
- depends on (RALINK && (SOC_MT7620 || SOC_MT7621)) || ARCH_AIROHA || COMPILE_TEST
+ depends on (RALINK && (SOC_MT7620 || SOC_MT7621)) || ARCH_AIROHA || ECONET || COMPILE_TEST
help
Say Y here to include support for I2C controller in the
MediaTek MT7621/MT7628 SoCs.
--
2.39.5
^ permalink raw reply [flat|nested] 3+ messages in thread