From: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Kumar Patro <bibek.patro@oss.qualcomm.com>,
Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
Luca Weiss <luca.weiss@fairphone.com>,
Shawn Guo <shengchao.guo@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
Komal Bajaj <komal.bajaj@oss.qualcomm.com>,
Abel Vesa <abel.vesa@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Subject: [PATCH v7 0/5] arm64: dts: qcom: Add EL2 overlays for Shikra and SM8750
Date: Fri, 20 Nov 2026 18:50:48 +0530 [thread overview]
Message-ID: <20261120-shikra-el2-v7-0-9d9000eb50d4@oss.qualcomm.com> (raw)
Shikra EVK variants boot Linux under the Gunyah hypervisor (EL2) by
default, with Linux running at EL1. Booting Linux directly at EL2
requires the remote processor firmware IOMMU streams to be described
in the DeviceTree used by Linux.
Add a Shikra EL2-specific DT overlay and wire it up in the Makefile to
generate -el2.dtb artifacts for the Shikra EVK variants alongside the
regular DTBs.
Add a similar EL2 overlay for SM8750 MTP, which also boots Linux under
Gunyah by default.
The series also moves the Qualcomm PAS remoteproc iommus constraint to
the SoC-specific bindings and relaxes the item limit to accommodate the
remoteproc SMMU mappings required for Shikra and SM8750 EL2 boot.
Komal Bajaj (5):
dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings
dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints
dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP
arm64: dts: qcom: shikra: Add EL2 overlay for EVK variants
arm64: dts: qcom: sm8750: Add EL2 overlay for MTP
.../bindings/remoteproc/qcom,adsp.yaml | 6 ++++
.../remoteproc/qcom,kaanapali-soccp-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,milos-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,nord-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,pas-common.yaml | 3 --
.../bindings/remoteproc/qcom,qcs404-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sc7180-pas.yaml | 6 ++++
.../remoteproc/qcom,sc8280xp-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sdx55-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,shikra-pas.yaml | 28 ++++++++++++++++
.../bindings/remoteproc/qcom,sm6115-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm6350-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm6375-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8150-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8350-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8550-pas.yaml | 30 +++++++++++++++++
arch/arm64/boot/dts/qcom/Makefile | 15 +++++++++
arch/arm64/boot/dts/qcom/shikra-el2.dtso | 33 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8750-el2.dtso | 30 +++++++++++++++++
20 files changed, 220 insertions(+), 3 deletions(-)
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
---
Changes in v7:
- Shikra: drop the q6apmdai node from EL2 overlay (sashiko)
- Shikra, SM8750: fix the subject and commit message of the EL2 overlay (sashiko)
- Link to v6: https://lore.kernel.org/r/20261119-shikra-el2-v6-0-0e91a1467e79@oss.qualcomm.com
Changes in v6:
- Define iommus with a description in the top-level properties of every
binding referencing qcom,pas-common.yaml instead of in conditional
blocks, making patch 1 a no functional change move (Krzysztof, Mukesh)
- Reword the commit messages
- Shikra: allow up to three iommus entries at the top level, require
three for LPAICP, allow one for CDSP and disallow iommus for MPSS
- Shikra: drop the per-item iommus descriptions
- Add SM8750 EL2 overlay and the corresponding binding change
- Link to v5: https://lore.kernel.org/r/20261113-shikra-el2-v5-0-8aca743de97f@oss.qualcomm.com
Changes in v5:
- Declare iommus property once in top-level properties of qcom,sa8775p-pas.yaml instead of repeating it in every allOf branch (Krzysztof, sashiko)
- Add Glymur ADSP/CDSP compatibles to iommus conditional in qcom,sm8550-pas.yaml
- Add sc7280 ADSP/CDSP compatibles to iommus conditional in qcom,sc7180-pas.yaml
- Add a description for each iommus entry
- Shikra: list three entries for LPAICP and drop the iommus property for qcom,shikra-mpss-pas (Krzysztof)
- Link to v4: https://lore.kernel.org/r/20261104-shikra-el2-v4-0-97e7019debff@oss.qualcomm.com
Changes in v4:
- Add a patch to move the iommus constraint from qcom,pas-common.yaml to SoC-specific PAS bindings (Mukesh)
- Add iommus constraints for all Shikra PAS compatibles instead of only relaxing the limit for LPAICP
- Add WiFi firmware iommus to Shikra EL2 overlay
- Link to v3: https://lore.kernel.org/r/20261005-shikra-el2-v3-0-618f7343695c@oss.qualcomm.com
Changes in v3:
- Drop qcom,pas-common reference and add per-compatible iommus limits for Shikra (Krzysztof)
- Link to v2: https://lore.kernel.org/r/20260930-shikra-el2-v2-0-f0822be5aaee@oss.qualcomm.com
Changes in v2:
- Relax the Qualcomm PAS remoteproc `iommus` item limit, needed for Shikra EL2 remoteproc SMMU mappings.
- Link to v1: https://lore.kernel.org/r/20260918-shikra-el2-v1-1-07bb072baa31@oss.qualcomm.com
---
Komal Bajaj (5):
dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings
dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints
dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP
arm64: dts: qcom: shikra: Add EL2 overlay for EVK variants
arm64: dts: qcom: sm8750: Add EL2 overlay for MTP
.../devicetree/bindings/remoteproc/qcom,adsp.yaml | 6 ++++
.../remoteproc/qcom,kaanapali-soccp-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,milos-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,nord-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,pas-common.yaml | 3 --
.../bindings/remoteproc/qcom,qcs404-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sc7180-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sc8280xp-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sdx55-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,shikra-pas.yaml | 28 ++++++++++++++++++
.../bindings/remoteproc/qcom,sm6115-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm6350-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm6375-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8150-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8350-pas.yaml | 6 ++++
.../bindings/remoteproc/qcom,sm8550-pas.yaml | 30 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/Makefile | 15 ++++++++++
arch/arm64/boot/dts/qcom/shikra-el2.dtso | 33 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8750-el2.dtso | 30 ++++++++++++++++++++
20 files changed, 220 insertions(+), 3 deletions(-)
---
base-commit: e8017d29067fd1310a65c3494ce1a1b492adbac6
change-id: 20260918-shikra-el2-ea8969385c3c
Best regards,
--
Komal Bajaj <komal.bajaj@oss.qualcomm.com>
next reply other threads:[~2026-11-20 13:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 13:20 Komal Bajaj [this message]
2026-11-20 13:20 ` [PATCH v7 1/5] dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 2/5] dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 3/5] dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 4/5] arm64: dts: qcom: shikra: Add EL2 overlay for EVK variants Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 5/5] arm64: dts: qcom: sm8750: Add EL2 overlay for MTP Komal Bajaj
-- strict thread matches above, loose matches on Subject: below --
2026-11-20 13:16 [PATCH v7 0/5] arm64: dts: qcom: Add EL2 overlays for Shikra and SM8750 Komal Bajaj
2026-11-20 13:26 ` Komal Bajaj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-shikra-el2-v7-0-9d9000eb50d4@oss.qualcomm.com \
--to=komal.bajaj@oss.qualcomm.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=bibek.patro@oss.qualcomm.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=jingyi.wang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh@kernel.org \
--cc=shengchao.guo@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®