From: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Kumar Patro <bibek.patro@oss.qualcomm.com>,
Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
Luca Weiss <luca.weiss@fairphone.com>,
Shawn Guo <shengchao.guo@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Subject: [PATCH v7 5/5] arm64: dts: qcom: sm8750: Add EL2 overlay for MTP
Date: Fri, 20 Nov 2026 18:50:53 +0530 [thread overview]
Message-ID: <20261120-shikra-el2-v7-5-9d9000eb50d4@oss.qualcomm.com> (raw)
In-Reply-To: <20261120-shikra-el2-v7-0-9d9000eb50d4@oss.qualcomm.com>
SM8750 boards boot Linux under the Gunyah hypervisor, with Linux
running at EL1. Linux can also be booted directly at EL2 on these
devices.
For EL2 boot, describe the IOMMU streams used by the remote processor
firmware in the DeviceTree consumed by Linux. Also disable GPU zap
shader and Iris video codec.
Add an EL2-specific DT overlay and apply it to the SM8750 MTP to
produce sm8750-mtp-el2.dtb alongside the standard DTB.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 4 ++++
arch/arm64/boot/dts/qcom/sm8750-el2.dtso | 30 ++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5c8d179f2792..60f627a469e9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -511,6 +511,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-valve-deckard.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
+
+sm8750-mtp-el2-dtbs := sm8750-mtp.dtb sm8750-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp-el2.dtb
+
dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8750-el2.dtso b/arch/arm64/boot/dts/qcom/sm8750-el2.dtso
new file mode 100644
index 000000000000..3e50c50e82dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-el2.dtso
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+
+ * Pakala specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&gpu_zap_shader {
+ status = "disabled";
+};
+
+&iris {
+ status = "disabled";
+};
+
+&remoteproc_adsp {
+ iommus = <&apps_smmu 0x1000 0x0>,
+ <&apps_smmu 0x10a0 0x0>,
+ <&apps_smmu 0x00a5 0x0>,
+ <&apps_smmu 0x0425 0x0>,
+ <&apps_smmu 0x0525 0x0>,
+ <&apps_smmu 0x0125 0x0>;
+};
+
+&remoteproc_cdsp {
+ iommus = <&apps_smmu 0x0c00 0x0>;
+};
--
2.34.1
prev parent reply other threads:[~2026-11-20 13:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 13:20 [PATCH v7 0/5] arm64: dts: qcom: Add EL2 overlays for Shikra and SM8750 Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 1/5] dt-bindings: remoteproc: Move iommus constraint to SoC-specific bindings Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 2/5] dt-bindings: remoteproc: qcom,shikra-pas: Add iommus constraints Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 3/5] dt-bindings: remoteproc: qcom,sm8550-pas: Allow 6 iommus for SM8750 ADSP Komal Bajaj
2026-11-20 13:20 ` [PATCH v7 4/5] arm64: dts: qcom: shikra: Add EL2 overlay for EVK variants Komal Bajaj
2026-11-20 13:20 ` Komal Bajaj [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-shikra-el2-v7-5-9d9000eb50d4@oss.qualcomm.com \
--to=komal.bajaj@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=bibek.patro@oss.qualcomm.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingyi.wang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh@kernel.org \
--cc=shengchao.guo@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®