From: "Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
To: neil.armstrong@linaro.org, jesszhan0024@gmail.com,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
u.kleine-koenig@baylibre.com,
"Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
Subject: [PATCH v4 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5)
Date: Fri, 20 Nov 2026 14:40:58 +0300 [thread overview]
Message-ID: <20261120114100.978148-1-tadilhusrev@gmail.com> (raw)
In-Reply-To: <20261116070212.314228-1-tadilhusrev@gmail.com>
This series adds a DRM panel driver and its DT binding for MIPI-DSI
video-mode panels based on the Novatek NT36525 controller, as fitted on
the Samsung Galaxy XCover5 (SM-G525F, Exynos850). The panel is 720x1480,
uses an active-low reset (RESX), and a DCS init sequence that mirrors
the stock Samsung bring-up. Backlight goes through drm_panel_of_backlight().
Patch 1 dt-bindings (no change since v3)
Patch 2 the panel driver
v4 addresses Uwe Kleine-König's v3 review comment: drop the unneeded
<linux/mod_devicetable.h> include (it is pulled in transitively; this
driver's of_device_id/MODULE_DEVICE_TABLE(of, ...) still build clean
without it).
Adding phone-devel@vger.kernel.org to Cc per Ivon Argel's suggestion
on the v3 thread, so the relevant ecosystem developers see it (not
adding Ivon's own address; he asked not to be personally Cc'd).
On Michael McAllister's offer to add Moto G10 (DJN NT36525B) support
on top of this series: happy to see a follow-up patch once this base
driver lands; I'll reply on-list separately rather than hold this
series on it.
Tested on a Samsung Galaxy XCover5 running 7.4-rc3 plus this series
(re-confirmed 2026-11-20, kernel 7.4.0-rc3-00023-gdcb8b91fb779+ #32,
after rebasing our local tree from 7.4.0-rc1 to the real 7.4-rc3 tag):
the DSI panel connector probes and reports "connected", debugfs
reports the reset gpio as ACTIVE LOW, and /sys/class/backlight/ is
present and readable. checkpatch.pl and dt_binding_check are clean
(bar the usual new-file MAINTAINERS note; the files are covered by
the DRM PANEL DRIVERS wildcards).
Based on v7.4-rc3.
Tool usage
----------
This series was developed during XCover5 mainline bring-up with the help
of an AI coding assistant (Claude Code, Anthropic). The assistant converted
the vendor init stream to mipi_dsi_dcs_write_seq_multi(), drafted the driver
skeleton and the DT binding, and drafted these changelogs. I reviewed every
line, validated the binding (dt_binding_check, yamllint), tested the driver
on hardware, and take full responsibility for the contribution.
Prompt summary: "convert the XCover5 NT36525 vendor panel init into a
mainline drm_panel driver plus DT binding; keep it checkpatch- and
dt_binding_check-clean; test on the device." Review comments are welcome
and I will answer them myself.
Adil Hüsrev Tepe (2):
dt-bindings: display: panel: add Novatek NT36525
drm/panel: add Novatek NT36525 panel driver
.../display/panel/novatek,nt36525.yaml | 83 +++
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36525.c | 490 ++++++++++++++++++
4 files changed, 587 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36525.c
--
2.53.0
next prev parent reply other threads:[~2026-11-20 11:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:02 [PATCH v1 " Adil Hüsrev Tepe
2026-11-16 7:02 ` [PATCH v1 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-16 7:02 ` [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 1/2] dt-bindings: display: panel: novatek,nt36525: fix v1 review issues Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 2/2] drm/panel: novatek-nt36525: " Adil Hüsrev Tepe
2026-11-17 10:47 ` Krzysztof Kozlowski
2026-11-17 17:33 ` Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5) Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-18 7:48 ` Uwe Kleine-König
2026-11-18 15:53 ` [PATCH v3 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5) Michael McAllister
2026-11-20 11:40 ` Adil Hüsrev Tepe [this message]
2026-11-20 11:40 ` [PATCH v4 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-20 11:41 ` [PATCH v4 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120114100.978148-1-tadilhusrev@gmail.com \
--to=tadilhusrev@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®