* [PATCH] serial: 8250_exar: check IS_ERR() on __xr17v35x_register_gpio()
@ 2026-11-20 19:21 Elkin Cruz
0 siblings, 0 replies; only message in thread
From: Elkin Cruz @ 2026-11-20 19:21 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby
Cc: linux-kernel, linux-serial, llvm, irogers, Elkin Cruz
__xr17v35x_register_gpio() calls platform_device_register_full(), which
returns an ERR_PTR() on failure rather than NULL. Both
xr17v35x_register_gpio() and iot2040_register_gpio() store the return
value directly into priv->gpio without checking IS_ERR() and return 0;
xr17v35x_unregister_gpio() later tests only if (priv->gpio) and
dereferences the error pointer via __xr17v35x_unregister_gpio().
Check IS_ERR(pdev) and propagate PTR_ERR(pdev) in both callers.
Fixes: 1145d1a0703f ("serial: 8250_exar: use platform_device_register_full()")
Signed-off-by: Elkin Cruz <elkin@google.com>
---
I am trying out a new Clang static analysis linter for ERR_PTR/NULL
handling, and it flagged this code as possibly buggy. The findings were triaged
and fixed with an AI coding assistant, then checked against linux-next (not
runtime-tested on hardware).
Thanks,
Elkin
drivers/tty/serial/8250/8250_exar.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 42e55a8f8c69..66858e383afc 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -1173,8 +1173,14 @@ static const struct software_node exar_gpio_node = {
static int xr17v35x_register_gpio(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port)
{
- if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
- priv->gpio = __xr17v35x_register_gpio(pcidev, &exar_gpio_node);
+ if (pcidev->vendor == PCI_VENDOR_ID_EXAR) {
+ struct platform_device *pdev;
+
+ pdev = __xr17v35x_register_gpio(pcidev, &exar_gpio_node);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ priv->gpio = pdev;
+ }
return 0;
}
@@ -1286,13 +1292,17 @@ static int iot2040_register_gpio(struct exar8250 *priv,
struct uart_8250_port *port)
{
u8 __iomem *p = port->port.membase;
+ struct platform_device *pdev;
writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0);
writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0);
writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8);
writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8);
- priv->gpio = __xr17v35x_register_gpio(pcidev, &iot2040_gpio_node);
+ pdev = __xr17v35x_register_gpio(pcidev, &iot2040_gpio_node);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ priv->gpio = pdev;
return 0;
}
--
2.56.1.750.gf70dc682cf-goog
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-20 19:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-20 19:21 [PATCH] serial: 8250_exar: check IS_ERR() on __xr17v35x_register_gpio() Elkin Cruz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®