mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] ARM: mm: Ignore PTE_AP2 in pte_same() for LPAE
@ 2026-11-21 16:38 Karl Mehltretter
  0 siblings, 0 replies; only message in thread
From: Karl Mehltretter @ 2026-11-21 16:38 UTC (permalink / raw)
  To: Russell King
  Cc: Karl Mehltretter, David Hildenbrand, Andrew Morton, Xu Xin,
	Chengming Zhou, linux-arm-kernel, linux-mm, linux-kernel

For valid ptes, cpu_v7_set_pte_ext() derives the hardware read-only bit
PTE_AP2 from L_PTE_DIRTY and L_PTE_RDONLY. pte_wrprotect() and
pte_mkclean() only change those software bits and leave PTE_AP2 as it
is. Starting from a dirty, writable pte, the software value therefore
has PTE_AP2 clear while the installed entry has it set.

KSM hits this since commit c33c794828f2 ("mm: ptep_get() conversion"),
which made write_protect_page() return the software value instead of
reading the installed entry back. replace_page() then finds the stored
entry different and gives up. After a failed zero-page merge, KSM can
fall back to a regular merge in the same pass, so zero-filled pages
end up as ordinary KSM pages instead of mapping the zero page.

Mask PTE_AP2 like PTE_EXT_NG for present ptes. L_PTE_DIRTY and
L_PTE_RDONLY are still compared, so changes to the dirty and
write-permission state remain visible.

Fixes: ded947798469 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE")
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
---
Assisted by an LLM.

Tested on v7.4-rc3, multi_v7_defconfig with ARM_LPAE and KSM, as a
32-bit guest in QEMU (TCG, cortex-a15) and under KVM on a Raspberry Pi
400 (Cortex-A72). 1024 zero-filled pages merged with use_zero_pages=1,
and test_unmerge_zero_pages from
tools/testing/selftests/mm/ksm_functional_tests:

                     ksm_zero_pages   test_unmerge_zero_pages
  v7.4-rc3                        0   fails
  with this patch              1024   passes

Unpatched v6.12 shows the same failure. If this is better handled in
KSM, reading the entry back after set_pte_at() in write_protect_page(),
as before c33c794828f2, also fixes it.

 arch/arm/include/asm/pgtable-3level.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 7b71a3d414b..4a187d7be1d 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -161,11 +161,15 @@ static inline pmd_t *pud_pgtable(pud_t pud)
  *
  * To correct this behaviour, we mask off PTE_EXT_NG for any pte that is
  * present before running the comparison.
+ *
+ * Likewise, cpu_v7_set_pte_ext() sets PTE_AP2 in a valid stored entry when
+ * the pte is clean or read-only. PTE_AP2 is derived from L_PTE_DIRTY and
+ * L_PTE_RDONLY, which are still compared, so mask it off as well.
  */
 #define __HAVE_ARCH_PTE_SAME
-#define pte_same(pte_a,pte_b)	((pte_present(pte_a) ? pte_val(pte_a) & ~PTE_EXT_NG	\
+#define pte_same(pte_a, pte_b)	((pte_present(pte_a) ? pte_val(pte_a) & ~(PTE_EXT_NG | PTE_AP2) \
 					: pte_val(pte_a))				\
-				== (pte_present(pte_b) ? pte_val(pte_b) & ~PTE_EXT_NG	\
+				== (pte_present(pte_b) ? pte_val(pte_b) & ~(PTE_EXT_NG | PTE_AP2) \
 					: pte_val(pte_b)))
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))

base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
-- 
2.39.5 (Apple Git-154)


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-21 16:38 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-21 16:38 [PATCH] ARM: mm: Ignore PTE_AP2 in pte_same() for LPAE Karl Mehltretter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®