From: Mehmet Fide <mehmet.fide@gmail.com>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: Luka Gejak <luka.gejak@linux.dev>,
Sascha Hauer <s.hauer@pengutronix.de>,
Zong-Zhe Yang <kevin_yang@realtek.com>,
Tzu-En Huang <tehuang@realtek.com>,
Yan-Hsuan Chuang <yhchuang@realtek.com>,
Kalle Valo <kvalo@kernel.org>,
Stanislaw Gruszka <sgruszka@redhat.com>,
Brian Norris <briannorris@chromium.org>,
linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
mehmet.fide@screeningeagle.com
Subject: [PATCH rtw-next v4 0/4] wifi: rtw88: fixes around the firmware recovery
Date: Sat, 21 Nov 2026 20:15:24 +0100 [thread overview]
Message-ID: <20261121191528.591334-1-mehmet.fide@gmail.com> (raw)
From: Mehmet Fide <mehmet.fide@screeningeagle.com>
Fixes for what a firmware crash test showed on an RTL8822CE, and for
what Luka found in v2 and v3. Patch 5 of v3 is dropped, commit
3f2238709f5d ("wifi: rtw88: clear RTW_FLAG_RESTARTING on stop and start
failure") does the same.
Tested on rtw-next 0bdc579dbfc2 on an i.MX8MP board with lockdep and
kmemleak, with firmware crashes triggered from debugfs on the RTL8822CE:
- patch 1: no reserved page leaked after crashes with an AP or a
station interface, where rtw-next leaked pages on each crash. The
beacon update work and a WoWLAN suspend between the crash and the
reconfiguration found the pages
- patch 2: with the firmware TX reports dropped in a test build, hostapd
got a purged client probe as not acknowledged, with no ACK signal or
link ID
- patch 3: with the collection held back in a test build, a client
moved back to AUTH and deleted in that window was skipped
- patch 4: no "sleeping function called from invalid context" on a
crash with an associated station interface
The regression tests on an RTL8822CE, an RTL8822BU, an RTL8822CU and
two RTL8821CU on both bands passed, except the 2.4 GHz beacon test of
the RTL8822CE. A neighbour AP's beacons pass our TBTT on that channel
every 157 s, and the beacon loss over 330 to 400 s is in the same
range with and without the series.
v4:
- patch 1: the pages are kept through the recovery and freed when the
interface is added again; no port checks (Zong-Zhe Yang, Luka Gejak)
- patch 2: the TX status is cleared when a frame is queued (Luka Gejak);
Reviewed-by dropped
- patch 3: stations without si->vif are skipped (Luka Gejak)
- patch 4: no change
- patch 5 of v3 dropped for commit 3f2238709f5d
v3:
- patch 1: no RTW_FLAG_RESTARTING test in the beacon update work; the
page download and the page location H2C do nothing while no port is
in use (Luka Gejak)
- patch 3: new, rtw_iterate_stas() cannot skip a station (Luka Gejak)
- patch 5: new, RTW_FLAG_RESTARTING is cleared when the device stops
(Luka Gejak)
- patches 2 and 4: no change
- rebased on rtw-next
v2:
- patch 1: the beacon update work does nothing while
RTW_FLAG_RESTARTING is set (Luka Gejak)
- patches 2 and 3: Reviewed-by Luka Gejak, no change
- rebased on rtw-next
v3: https://lore.kernel.org/linux-wireless/20261117171003.1840491-1-mehmet.fide@gmail.com/
v2: https://lore.kernel.org/linux-wireless/20261116072014.1142494-1-mehmet.fide@gmail.com/
v1: https://lore.kernel.org/linux-wireless/20261111213239.569224-1-mehmet.fide@gmail.com/
Mehmet Fide (4):
wifi: rtw88: free the reserved pages of an interface on firmware
recovery
wifi: rtw88: report the frames purged from the TX report queue
wifi: rtw88: do not drop stations when collecting them for an
iteration
wifi: rtw88: reset the stations outside of RCU on firmware recovery
drivers/net/wireless/realtek/rtw88/mac80211.c | 8 +++++-
drivers/net/wireless/realtek/rtw88/main.c | 7 ++----
drivers/net/wireless/realtek/rtw88/main.h | 2 ++
drivers/net/wireless/realtek/rtw88/tx.c | 25 +++++++++++++++----
drivers/net/wireless/realtek/rtw88/tx.h | 1 +
drivers/net/wireless/realtek/rtw88/util.c | 23 ++++++-----------
6 files changed, 39 insertions(+), 27 deletions(-)
base-commit: 0bdc579dbfc251a6b6838ee9459b6771b948c617
--
2.56.0
next reply other threads:[~2026-11-21 19:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 19:15 Mehmet Fide [this message]
2026-11-21 19:15 ` [PATCH rtw-next v4 1/4] wifi: rtw88: free the reserved pages of an interface on " Mehmet Fide
2026-11-21 19:15 ` [PATCH rtw-next v4 2/4] wifi: rtw88: report the frames purged from the TX report queue Mehmet Fide
2026-11-21 19:15 ` [PATCH rtw-next v4 3/4] wifi: rtw88: do not drop stations when collecting them for an iteration Mehmet Fide
2026-11-21 19:15 ` [PATCH rtw-next v4 4/4] wifi: rtw88: reset the stations outside of RCU on firmware recovery Mehmet Fide
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121191528.591334-1-mehmet.fide@gmail.com \
--to=mehmet.fide@gmail.com \
--cc=briannorris@chromium.org \
--cc=kevin_yang@realtek.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luka.gejak@linux.dev \
--cc=mehmet.fide@screeningeagle.com \
--cc=pkshih@realtek.com \
--cc=s.hauer@pengutronix.de \
--cc=sgruszka@redhat.com \
--cc=tehuang@realtek.com \
--cc=yhchuang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®