mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [RFC PATCH 0/8] drm: State readout for the i.MX8MN display pipeline
@ 2026-11-22 15:30 Dario Binacchi
  2026-11-22 15:30 ` [RFC PATCH 1/8] drm/bridge: Add atomic_sro_install_state hook Dario Binacchi
                   ` (7 more replies)
  0 siblings, 8 replies; 9+ messages in thread
From: Dario Binacchi @ 2026-11-22 15:30 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: michael, linux-amarula, Dario Binacchi, Andrzej Hajda,
	David Airlie, Fabio Estevam, Frank Li, Inki Dae, Jagan Teki,
	Jernej Skrabec, Jessica Zhang, Jonas Karlman, Laurent Pinchart,
	Luca Ceresoli, Maarten Lankhorst, Marek Szyprowski, Marek Vasut,
	Neil Armstrong, Pengutronix Kernel Team, Robert Foss,
	Sascha Hauer, Simona Vetter, Stefan Agner, Thomas Zimmermann,
	dri-devel, imx, linux-arm-kernel, linux-kernel

This series implements the hardware state readout [1] for the display
pipeline of the i.MX8MN (LCDIF, Samsung DSIM, Synaptics R63353 panel),
so that the splash screen shown by the bootloader stays on, without a
modeset, until a client draws.

The first two patches add the hooks a bridge and a panel need to
acquire their resources (runtime PM, regulators) when they are found
enabled. They are a proposal, since the drivers converted so far
didn't need them.

The series is based on [1] and needs [2] to keep the power domains of
the display on.

Tested on i.MX8MN (BSH SMM S2 PRO).

[1] https://lore.kernel.org/r/20261106-drm-state-readout-v8-0-cbe78624e1bc@kernel.org
[2] https://lore.kernel.org/r/20261122095927.2631909-1-dario.binacchi@amarulasolutions.com


Dario Binacchi (8):
  drm/bridge: Add atomic_sro_install_state hook
  drm/panel: Add sro_install hook
  drm/mxsfb: Use the bridge connector
  drm/mxsfb: Switch to drm_mode_config_create_initial_state()
  drm/mxsfb: Stop the controller in hw_reset
  drm/mxsfb: Implement hw state readout
  drm/bridge: samsung-dsim: Implement hw state readout
  drm/panel: synaptics-r63353: Support hw state readout

 drivers/gpu/drm/bridge/samsung-dsim.c         | 125 +++++-
 drivers/gpu/drm/drm_bridge.c                  |  41 ++
 drivers/gpu/drm/drm_panel.c                   |  16 +
 drivers/gpu/drm/mxsfb/Kconfig                 |   2 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.c             |  31 +-
 drivers/gpu/drm/mxsfb/mxsfb_kms.c             | 394 +++++++++++++++++-
 drivers/gpu/drm/mxsfb/mxsfb_regs.h            |   3 +
 .../gpu/drm/panel/panel-synaptics-r63353.c    |  33 +-
 include/drm/drm_bridge.h                      |  20 +
 include/drm/drm_panel.h                       |  10 +
 10 files changed, 642 insertions(+), 33 deletions(-)

---
base-commit: fe97bd8df0365f5aa27ea88b621e3f475bdd544d
branch: drm-sro-rfc

-- 
2.43.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2026-11-22 15:31 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-22 15:30 [RFC PATCH 0/8] drm: State readout for the i.MX8MN display pipeline Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 1/8] drm/bridge: Add atomic_sro_install_state hook Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 2/8] drm/panel: Add sro_install hook Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 3/8] drm/mxsfb: Use the bridge connector Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 4/8] drm/mxsfb: Switch to drm_mode_config_create_initial_state() Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 5/8] drm/mxsfb: Stop the controller in hw_reset Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 6/8] drm/mxsfb: Implement hw state readout Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 7/8] drm/bridge: samsung-dsim: " Dario Binacchi
2026-11-22 15:30 ` [RFC PATCH 8/8] drm/panel: synaptics-r63353: Support " Dario Binacchi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®