mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v3 0/3] Add read-only SpacemiT K3 eFuse support
@ 2026-11-22 17:38 Jiayu Du
  2026-11-22 17:38 ` [PATCH v3 1/3] dt-bindings: nvmem: Add SpacemiT K3 eFuse controller Jiayu Du
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Jiayu Du @ 2026-11-22 17:38 UTC (permalink / raw)
  To: srini
  Cc: robh, krzk+dt, conor+dt, dlan, troy.mitchell, me, aurelien, pjw,
	palmer, aou, alex, p.zabel, devicetree, linux-riscv, spacemit,
	linux-kernel, Jiayu Du

This series adds read-only NVMEM access to bank 0 and bank 7 of the
SpacemiT K3 eFuse controller. These banks contain temperature calibration
parameters and other configuration data.

Tested on a SpacemiT K3 COM260 Kit. Both banks returned the same data
across repeated reads and five unbind/rebind cycles. Reads from the other
banks returned zeros. With the separate K3 thermal series applied, all
seven temperature channels resumed reporting after each rebind.

Changes in v3:
- Use an exclusive, managed reset and assert it on detach or a subsequent
  probe failure.
- Use a 512-byte NVMEM space with bank 0 at 0x000 and bank 7 at 0x0e0;
  cover the other banks with keepouts.
- Update the binding and DT calibration cell offsets to 0x1c and 0xea.
- Clarify the shadow reload names and remove the incorrect reset comment.
- Drop Conor's Acked-by from the binding patch after changing the NVMEM
  address layout.

v2: https://lore.kernel.org/all/20261116075423.1519438-1-duge1256@gmail.com/

Changes in v2:
- Trigger a shadow reload before polling FUSE_READY; fail probe on timeout.
- Enable the clock only while accessing hardware and leave the shared
  reset deasserted on teardown.
- Explain why the root key and SSK registers are excluded.
- Use an aligned __le32 cache instead of put_unaligned_le32().
- Drop unnecessary Kconfig dependencies and the bootloader initialization
  requirement.
- Use devm_platform_ioremap_resource() and align the register definitions.
- Enable the eFuse node by default in k3.dtsi.
- Add Conor's Acked-by to the binding patch.

v1: https://lore.kernel.org/all/20261106060525.346873-1-duge1256@gmail.com/

Jiayu Du (3):
  dt-bindings: nvmem: Add SpacemiT K3 eFuse controller
  nvmem: Add read-only SpacemiT K3 eFuse support
  riscv: dts: spacemit: Add K3 eFuse and temperature trim cells

 .../bindings/nvmem/spacemit,k3-efuse.yaml     |  63 ++++++
 MAINTAINERS                                   |   6 +
 arch/riscv/boot/dts/spacemit/k3.dtsi          |  23 ++
 drivers/nvmem/Kconfig                         |  11 +
 drivers/nvmem/Makefile                        |   1 +
 drivers/nvmem/spacemit-k3-efuse.c             | 205 ++++++++++++++++++
 6 files changed, 309 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/spacemit,k3-efuse.yaml
 create mode 100644 drivers/nvmem/spacemit-k3-efuse.c


base-commit: d6bcfc94eb4da6e089c5473970cd96727292fd97
-- 
2.43.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-11-22 17:39 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-22 17:38 [PATCH v3 0/3] Add read-only SpacemiT K3 eFuse support Jiayu Du
2026-11-22 17:38 ` [PATCH v3 1/3] dt-bindings: nvmem: Add SpacemiT K3 eFuse controller Jiayu Du
2026-11-22 17:38 ` [PATCH v3 2/3] nvmem: Add read-only SpacemiT K3 eFuse support Jiayu Du
2026-11-22 17:38 ` [PATCH v3 3/3] riscv: dts: spacemit: Add K3 eFuse and temperature trim cells Jiayu Du

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®