From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Mikko Perttunen <mperttunen@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 09/18] ARM: tegra: tegratab: Add thermal configuration
Date: Sun, 22 Nov 2026 22:13:58 +0200 [thread overview]
Message-ID: <20261122201407.23742-10-clamor95@gmail.com> (raw)
In-Reply-To: <20261122201407.23742-1-clamor95@gmail.com>
Add thermal monitoring setup based on Palmas GP ADC sensors.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../tegra114-nvidia-tegratab-common.dtsi | 126 ++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
index bb5788b2539cd..cbf9b45284033 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
#include "tegra114.dtsi"
/ {
@@ -983,6 +985,9 @@ fuel-gauge@36 {
monitored-battery = <&battery>;
power-supplies = <&bq24193>;
+ io-channels = <&thermistor>;
+ io-channel-names = "temp";
+
maxim,alert-low-soc-level = <10>;
maxim,double-soc;
@@ -1011,6 +1016,21 @@ usb_otg_vbus: usb-otg-vbus {
};
};
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+
+ shunt-resistor = <5000>;
+
+ vs-supply = <&vdd_3v3_sys>;
+ #io-channel-cells = <1>;
+ };
+ };
+
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
@@ -1025,6 +1045,21 @@ palmas: pmic@58 {
ti,system-power-controller;
+ palmas_gpadc: adc {
+ compatible = "ti,palmas-gpadc";
+
+ interrupt-parent = <&palmas>;
+ interrupts = <18 IRQ_TYPE_NONE>,
+ <16 IRQ_TYPE_NONE>,
+ <17 IRQ_TYPE_NONE>;
+
+ ti,channel0-current-microamp = <5>;
+ ti,channel3-current-microamp = <400>;
+ ti,enable-extended-delay;
+
+ #io-channel-cells = <1>;
+ };
+
palmas_extcon: extcon {
compatible = "ti,palmas-usb-vid";
@@ -1546,4 +1581,95 @@ vdd_3v3_com: regulator-com {
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
+
+ thermistor: thermal-sensor-thermistor {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+
+ io-channels = <&palmas_gpadc 1>;
+ io-channel-names = "sensor-channel";
+ #io-channel-cells = <0>;
+
+ temperature-lookup-table = <
+ (-40000) 2726 (-35000) 2708 (-30000) 2683 (-25000) 2649
+ (-20000) 2605 (-15000) 2547 (-10000) 2475 (-5000) 2386
+ 0 2279 5000 2154 10000 2012 15000 1857
+ 20000 1691 25000 1521 30000 1351 35000 1187
+ 40000 1032 45000 889 50000 761 55000 648
+ 60000 549 65000 464 70000 392 75000 330
+ 80000 279 85000 235 90000 199 95000 168
+ 100000 143 105000 121 110000 103 115000 88
+ 120000 76 125000 65 >;
+ };
+
+ tdiode: thermal-sensor-tdiode {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+
+ io-channels = <&palmas_gpadc 3>;
+ io-channel-names = "sensor-channel";
+ #io-channel-cells = <0>;
+
+ // TODO: add a table here -25C to 125C
+ };
+
+ thermal-zones {
+ thermistor-thermal {
+ polling-delay-passive = <1100>; /* milliseconds */
+ polling-delay = <15000>; /* milliseconds */
+
+ thermal-sensors = <&thermistor>;
+
+ trips {
+ thermistor_trip: thermistor-alert {
+ /* throttle at 55C until temperature drops to 53C */
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ thermistor-crit {
+ /* shut down at 60C */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map-thermistor {
+ trip = <&thermistor_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ tdiode-thermal {
+ polling-delay-passive = <1100>; /* milliseconds */
+ polling-delay = <15000>; /* milliseconds */
+
+ thermal-sensors = <&tdiode>;
+
+ trips {
+ tdiode_trip: tdiode-alert {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map-tdiode {
+ trip = <&tdiode_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.53.0
next prev parent reply other threads:[~2026-11-22 20:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 20:13 [PATCH v1 00/18] [WIP] ARM: tegra: Update Tegra Note 7 configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 01/18] dt-bindings: ARM: tegra: Document Tegra Note 7 variants Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 02/18] ARM: tegra: Diverge Tegra Note 7 device tree to support its common versions Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 03/18] ARM: tegra: tegratab: Upgrade powerlines configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 04/18] ARM: tegra: tegratab: Add pinmux node Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 05/18] ARM: tegra: tegratab: Bind VDE device Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 06/18] ARM: tegra: tegratab: Configure USB and power supply Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 07/18] ARM: tegra: tegratab: Configure MMC devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 08/18] ARM: tegra: tegratab: Configure wireless devices Svyatoslav Ryhel
2026-11-22 20:13 ` Svyatoslav Ryhel [this message]
2026-11-22 20:13 ` [PATCH v1 10/18] ARM: tegra: tegratab: Configure HDMI Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 11/18] ARM: tegra: tegratab: Add audio codec and sound card configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 12/18] ARM: tegra: tegratab: Add common sensor nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 13/18] ARM: tegra: tegratab: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 14/18] ARM: tegra: tegratab: Add CPU DFLL clock node Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 15/18] ARM: tegra: tegratab: Update GPIO keys and switches Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 16/18] ARM: tegra: tegratab: Update aliases, chosen and memory nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 17/18] ARM: tegra: tegratab: Add video input configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 18/18] ARM: tegra: tegratab: Add panel rotation Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122201407.23742-10-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mperttunen@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®