mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Thierry Reding <thierry.reding@kernel.org>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Mikko Perttunen <mperttunen@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 03/18] ARM: tegra: tegratab: Upgrade powerlines configuration
Date: Sun, 22 Nov 2026 22:13:52 +0200	[thread overview]
Message-ID: <20261122201407.23742-4-clamor95@gmail.com> (raw)
In-Reply-To: <20261122201407.23742-1-clamor95@gmail.com>

Refresh existing PMIC configuration of tegratab according to all collected
information from downstream and device experiments. Complete PMC node
according to tegratab/tegranote7c board configuration. Add missing and
update existing fixed regulators.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../tegra114-nvidia-tegratab-common.dtsi      | 278 +++++++++++++-----
 .../nvidia/tegra114-nvidia-tegratab-p1988.dts |  22 ++
 2 files changed, 228 insertions(+), 72 deletions(-)

diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
index e4ba975fcc3db..9d18cb48a1e63 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
@@ -33,7 +33,7 @@ host1x@50000000 {
 		dsi@54300000 {
 			status = "okay";
 
-			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
 
 			panel@0 {
 				compatible = "lg,ld070wx3-sl01";
@@ -77,61 +77,129 @@ palmas_gpio: gpio {
 				#gpio-cells = <2>;
 			};
 
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
 			pmic {
 				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
 
+				ldo1-in-supply = <&vddio_ddr>;
+				ldo2-in-supply = <&vddio_ddr>;
+				ldo5-in-supply = <&vcore_emmc>;
+				ldo6-in-supply = <&vcore_emmc>;
+				ldo7-in-supply = <&vcore_emmc>;
+				ldo9-in-supply = <&vcore_emmc>;
 				ldoln-in-supply = <&vdd_smps10_out2>;
 
 				regulators {
-					smps123 {
-						regulator-name = "vd-cpu";
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1000000>;
+					vdd_cpu: smps123 {
+						regulator-name = "vdd_cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
 						regulator-always-on;
 						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
 					};
 
 					vdd_core: smps45 {
-						regulator-name = "vd-soc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
+						regulator-name = "vdd_core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
 						regulator-always-on;
 						regulator-boot-on;
+						ti,roof-floor = <3>;
 					};
 
 					avdd_lcd: smps6 {
-						regulator-name = "va-lcd-hv";
+						regulator-name = "vdd_lcd_hv";
 						regulator-min-microvolt = <3160000>;
 						regulator-max-microvolt = <3160000>;
 						regulator-boot-on;
 					};
 
-					smps7 {
-						regulator-name = "vd-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
+					vddio_ddr: smps7 {
+						regulator-name = "vddio_ddr";
+						regulator-min-microvolt = <1380000>;
+						regulator-max-microvolt = <1380000>;
 						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					vdd_1v8: smps8 {
-						regulator-name = "vs-pmu-1v8";
+					vdd_1v8_vio: smps8 {
+						regulator-name = "vdd_1v8";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					vdd_2v9_sys: smps9 {
-						regulator-name = "vs-sys-2v9";
+					vcore_emmc: smps9 {
+						regulator-name = "vdd_emmc";
 						regulator-min-microvolt = <2900000>;
 						regulator-max-microvolt = <2900000>;
-						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					vdd_smps10_out1: smps10_out1 {
-						regulator-name = "vd-smps10-out1";
+					smps10_out1 {
+						regulator-name = "vd_smps10_out1";
 						regulator-min-microvolt = <5000000>;
 						regulator-max-microvolt = <5000000>;
 						regulator-always-on;
@@ -139,90 +207,88 @@ vdd_smps10_out1: smps10_out1 {
 					};
 
 					vdd_smps10_out2: smps10_out2 {
-						regulator-name = "vd-smps10-out2";
+						regulator-name = "vd_smps10_out2";
 						regulator-min-microvolt = <5000000>;
 						regulator-max-microvolt = <5000000>;
 						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					ldo1 {
-						regulator-name = "va-pllx";
+					avdd_pll: ldo1 {
+						regulator-name = "vdd_pllm,x,u,a_p_c_s";
 						regulator-min-microvolt = <1050000>;
 						regulator-max-microvolt = <1050000>;
 						regulator-always-on;
 						regulator-boot-on;
+						ti,roof-floor = <3>;
 					};
 
-					vdd_1v2_ap: ldo2 {
-						regulator-name = "va-ap-1v2";
+					avdd_dsi_csi: ldo2 {
+						regulator-name = "avdd_dsi_csi";
 						regulator-min-microvolt = <1200000>;
 						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
 						regulator-boot-on;
 					};
 
 					ldo3 {
-						regulator-name = "vd-fuse";
+						regulator-name = "vpp_fuse";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
 					};
 
-					ldo4 {
-						regulator-name = "vd-ts-hv";
-						regulator-min-microvolt = <3200000>;
-						regulator-max-microvolt = <3200000>;
-						regulator-always-on;
-						regulator-boot-on;
+					avdd_touch: ldo4 {
+						regulator-name = "avdd_ts";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
 					};
 
-					ldo5 {
-						regulator-name = "va-cam2-hv";
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
+					avdd_2v8_front: ldo5 {
+						regulator-name = "avdd_front_cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
 					};
 
-					ldo6 {
-						regulator-name = "va-sns-hv";
+					vdd_2v85_sen: ldo6 {
+						regulator-name = "vdd_dev";
 						regulator-min-microvolt = <2850000>;
 						regulator-max-microvolt = <2850000>;
 					};
 
-					ldo7 {
-						regulator-name = "va-cam1-hv";
+					avdd_2v7_rear: ldo7 {
+						regulator-name = "avdd_rear_cam";
 						regulator-min-microvolt = <2700000>;
 						regulator-max-microvolt = <2700000>;
 					};
 
 					ldo8 {
-						regulator-name = "va-ap-rtc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						ti,enable-ldo8-tracking;
+						regulator-name = "vdd_rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
 						regulator-always-on;
 						regulator-boot-on;
+						ti,enable-ldo8-tracking;
 					};
 
-					ldo9 {
-						regulator-name = "vi-sdcard";
-						regulator-min-microvolt = <2900000>;
+					vddio_usd: ldo9 {
+						regulator-name = "vddio_usd";
+						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <2900000>;
 					};
 
-					ldousb {
-						regulator-name = "avdd-usb";
+					avdd_hdmi: ldoln {
+						regulator-name = "avdd_hdmi";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					ldoln {
-						regulator-name = "va-hdmi";
+					avdd_usb: ldousb {
+						regulator-name = "avdd_usb";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
 					};
 				};
 			};
@@ -230,16 +296,28 @@ ldoln {
 			rtc {
 				compatible = "ti,palmas-rtc";
 				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
+				interrupts = <8 IRQ_TYPE_NONE>;
 			};
-
 		};
 	};
 
 	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <300>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <2000>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
 		core-supply = <&vdd_core>;
 
-		nvidia,invert-interrupt;
+		/* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x58>;
+			nvidia,reg-addr = <0xa0>;
+			nvidia,reg-data = <0x00>;
+		};
 	};
 
 	/* eMMC */
@@ -271,12 +349,13 @@ backlight: backlight {
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 
-		power-supply = <&lcd_bl_en>;
+		power-supply = <&vdd_3v7_bl>;
 	};
 
 	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
+		clock-output-names = "ref-oscillator";
 		#clock-cells = <0>;
 	};
 
@@ -303,35 +382,90 @@ key-volume-up {
 		};
 	};
 
-	/* FIXME: output of BQ24192 */
-	vs_sys: regulator-vs {
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
 		compatible = "regulator-fixed";
-		regulator-name = "VS_SYS";
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
 	};
 
-	lcd_bl_en: regulator-lcden {
+	vdd_3v7_bl: regulator-bl-en {
 		compatible = "regulator-fixed";
-		regulator-name = "VDD_LCD_BL";
-		regulator-min-microvolt = <16500000>;
-		regulator-max-microvolt = <16500000>;
+		regulator-name = "vdd_3v7_bl";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		vin-supply = <&vs_sys>;
-		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_smps10_out2>;
+	};
+
+	vddio_1v8_cam: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_1v8_cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
 	};
 
 	dvdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
-		regulator-name = "VD_LCD_1V8";
+		regulator-name = "dvdd_1v8_lcd";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		vin-supply = <&vdd_1v8>;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vlogic_gyro: regulator-gyro {
+		compatible = "regulator-fixed";
+		regulator-name = "vlogic_gyro";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	avdd_hdmi_pll: regulator-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi_pll";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&avdd_pll>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
 	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
index 00126da319ec7..f461a2c492b1f 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
@@ -6,4 +6,26 @@
 / {
 	model = "Nvidia Tegra Note 7 (P1988)";
 	compatible = "nvidia,tegratab", "nvidia,tegra114";
+
+	i2c@7000d000 {
+		pmic@58 {
+			pmic {
+				regulators {
+					ldo4 {
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+
+	regulator-gyro {
+		gpio = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-hdmi-pll {
+		gpio = <&gpio TEGRA_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
-- 
2.53.0


  parent reply	other threads:[~2026-11-22 20:14 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-22 20:13 [PATCH v1 00/18] [WIP] ARM: tegra: Update Tegra Note 7 configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 01/18] dt-bindings: ARM: tegra: Document Tegra Note 7 variants Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 02/18] ARM: tegra: Diverge Tegra Note 7 device tree to support its common versions Svyatoslav Ryhel
2026-11-22 20:13 ` Svyatoslav Ryhel [this message]
2026-11-22 20:13 ` [PATCH v1 04/18] ARM: tegra: tegratab: Add pinmux node Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 05/18] ARM: tegra: tegratab: Bind VDE device Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 06/18] ARM: tegra: tegratab: Configure USB and power supply Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 07/18] ARM: tegra: tegratab: Configure MMC devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 08/18] ARM: tegra: tegratab: Configure wireless devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 09/18] ARM: tegra: tegratab: Add thermal configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 10/18] ARM: tegra: tegratab: Configure HDMI Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 11/18] ARM: tegra: tegratab: Add audio codec and sound card configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 12/18] ARM: tegra: tegratab: Add common sensor nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 13/18] ARM: tegra: tegratab: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 14/18] ARM: tegra: tegratab: Add CPU DFLL clock node Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 15/18] ARM: tegra: tegratab: Update GPIO keys and switches Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 16/18] ARM: tegra: tegratab: Update aliases, chosen and memory nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 17/18] ARM: tegra: tegratab: Add video input configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 18/18] ARM: tegra: tegratab: Add panel rotation Svyatoslav Ryhel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261122201407.23742-4-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mperttunen@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®