mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Dave Airlie" <airlied@gmail.com>
To: "Arjan van de Ven" <arjan@infradead.org>
Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>,
	"Keith Packard" <keithp@keithp.com>,
	"Dave Airlie" <airlied@linux.ie>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: kmap_atomic_pfn for PCI BAR access?
Date: Thu, 26 Jun 2008 15:02:04 +1000	[thread overview]
Message-ID: <21d7e9970806252202i10de9c82lb4637d9f1064f0b0@mail.gmail.com> (raw)
In-Reply-To: <20080625213603.0e82805b@infradead.org>

On Thu, Jun 26, 2008 at 2:36 PM, Arjan van de Ven <arjan@infradead.org> wrote:
> On Thu, 26 Jun 2008 11:23:11 +1000
> "Dave Airlie" <airlied@gmail.com> wrote:
>
>> On Thu, Jun 26, 2008 at 11:18 AM, Jeremy Fitzhardinge
>> <jeremy@goop.org> wrote:
>> > Keith Packard wrote:
>> >>
>> >> The graphics memory BAR is generally fairly good sized; on Intel
>> >> chips, it's between 256M and 1G (and growing). I want to write
>> >> data into this region from kernel space, but it's really too big
>> >> to map the whole thing into kernel address space, especially on
>> >> 32-bit systems. ioremap is not a good option here -- it's way too
>> >> slow.
>> >>
>> >> With CONFIG_HIGHMEM enabled, I can use kmap_atomic_pfn (well,
>> >> actually the kmap_atomic_proc_pfn included in the DRM tree) and
>> >> things work quite well -- performance is good, with barely any
>> >> measurable time spent in the PTE whacking (~1%).
>> >>
>> >> However, with CONFIG_HIGHMEM disabled, there aren't any PTEs
>> >> reserved for this kind of mapping fun. This makes me suspect that
>> >> abusing kmap_atomic for this operation would not be appreciated.
>> >> Should I use kmap_atomic_pfn to reach my PCI BAR like this?
>> >>
>> >> Would it be reasonable to supply a patch that made this work even
>> >> without CONFIG_HIGHMEM?
>> >>
>> >
>> > Usually people use ioremap to map device memory.  Wouldn't that
>> > work in this case?
>> >
>>
>> "but it's really too big to map the whole thing
>> into kernel address space, especially on 32-bit systems. ioremap is
>> not a good option here -- it's way too slow."
>>
>> >From the original mail.
>>
>> doing tlb flush for iounmap is slow as all hell if you do it a lot,
>> and we can't afford to mmap the whole aperture it can 1GB.
>
> well kmap does a tlb flush as well... you can't get away from doing a
> flush if you change cpu mapping.
> What you CAN do is play tricks and flush only once in a while and make
> sure you don't recycle mappings in the mean time (like kmap does).
>
> I can totally see doing an iounmap_lazy() and then have an
> iounmap_flush_lazy() thing or something like that....
>

Thats why keithp wants something like kmap_atomic but for ioremap
instead of kmaps.

This would be for short temporary ioremaps like kmap_atomic is.

Dave.

  reply	other threads:[~2008-06-26  5:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-23 17:34 Keith Packard
2008-06-26  1:18 ` Jeremy Fitzhardinge
2008-06-26  1:23   ` Dave Airlie
2008-06-26  3:11     ` Jeremy Fitzhardinge
2008-07-07  6:53       ` Nick Piggin
2008-07-07  7:05         ` Arjan van de Ven
2008-07-07 11:19           ` Nick Piggin
2008-06-26  4:36     ` Arjan van de Ven
2008-06-26  5:02       ` Dave Airlie [this message]
2008-06-26  5:33         ` Keith Packard
2008-06-26  5:36       ` Keith Packard
2008-06-26  5:59         ` Jeremy Fitzhardinge
2008-06-26  6:02           ` Dave Airlie
2008-06-26 10:36             ` Arjan van de Ven
2008-06-26 13:02               ` Arjan van de Ven
2008-06-26 10:34         ` Arjan van de Ven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=21d7e9970806252202i10de9c82lb4637d9f1064f0b0@mail.gmail.com \
    --to=airlied@gmail.com \
    --cc=airlied@linux.ie \
    --cc=arjan@infradead.org \
    --cc=jeremy@goop.org \
    --cc=keithp@keithp.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®